Manual do usuário Edelbrock Honda Civic Dx

Resumo do conteúdo contido na página número 1

Edelbrock One-Piece Pro-Flo Header
For 1992-1995 Honda Civic Lx, Dx, Ex, Si
Catalog #67342
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new Pro-Flo Header. They provide general guidelines to
be studied and understood before you remove your stock system. Failure to follow these instructions may void your
warranty. If you have any questions or problems, please contact our Technical Hotline at : 1-800-416-8628 from 7
am – 5 pm, Monday through Friday

Resumo do conteúdo contido na página número 2

ASSEMBLY 6. Using hair dryer set to high heat setting and low 1. Locate O sensor wire connector. Where it fan speed, heat shrink covers over terminal 2 connects to enginer harness, slide wire covering ends. (A heat gun is preferred for this operation). from engine harness back to expose wires. Use caution, you can get burned by the hair dryer or heated wire ends. 2. On the engine harness side of O connector, 2 leaving at least 1”, carefully cut the 4 wires. Do not 7. Install the header assemb