Manual do usuário Edelbrock 6601

Resumo do conteúdo contido na página número 1

TUBULAR EXHAUST SYSTEM
For 1994 - 1999 Dodge Ram Pick-Up, 1500 & 2500
Series, 5.2L & 5.9L V8, Auto/Std. Transmission, 2 & 4 WD
Catalog #6601, 66011, & 66012
INSTALLATION INSTRUCTION
Please study these instructions carefully before installing your new Tubular Exhaust System (TES). If you have any
questions or problems, please contact our Technical Hotline at : 1-800-416-8628 from 7 am - 5pm, Monday-Friday,
Pacific Standard Time or e-mail us at Edelbrock@Edelbrock.com. Please fill out and mail

Resumo do conteúdo contido na página número 2

INSTALLATION INSTRUCTIONS locate donut gasket with equal space all around for DISASSEMBLY the best seal (See Figure 2). 1. Disconnect negative battery cable. 5. With everything in place, tack weld left crossover pipe to catalytic converter. 2. Raise vehicle and remove O2 sensor from catalytic NOTE: MIG welding is desirable but gas welding converter, being careful not to damage. can be used. 3. Unbolt and remove exhaust pipe/catalytic converter 6. After tack welding, remove assembly and complet

Resumo do conteúdo contido na página número 3

KIT CONTENTS Catalog #6601, #66011, & #66012 Qty. Description Qty. Description 1 Manifold left side (#25-9080) 4 Hex capscrews; 3/8” x 2” 1 Manifold right side (#25-9081) 2 Hex nuts; 5/16”-18 1 Extention pipe - left (#25-9594) 2 Hex bolts; 5/16”-18 x 1-1/4” 1 Extension pipe - right (#25-9595) 4 Lock washers; 3/8” 12 Hex header bolts; 5/16” - 18” x 1” 14 Lock washers; 5/16” 2 Chrysler V8 port gaskets 8 Flat washers; 5/16” 1 EGR gasket 1 EGR block-off plate #79-8051 (for 1996 only) 2 Donut gaskets