Manual do usuário Edelbrock 5224

Resumo do conteúdo contido na página número 1

Edelbrock Strut Tower Brace
Catalog #5224

-2001 Mustang GT (Except Cobra)
Please study these instructions carefully before installing your new Strut Tower Brace. If you have any
questions or problems, please contact our Technical Hotline at : 1-800-416-8628 from 7 am –
through Friday, Pacific Standard Time.

ted tools needed for installation:
• 9/16 wrench
• 7/16 wrench
• 5/32 allen wrench
• 7/32 allen wrench
• 7mm socket and ratchet
• Punch and Hammer
• Drill bits and Drill moto

Resumo do conteúdo contido na página número 2

ASSEMBLY (Continued) 5. Trim the plastic firewall cover to fit with the strut tower brace and install. Slide and bolt the wiper shaft e. Replace the plastic cowl cover be sure to reconnect the washer fluid line, install the hood appropriate location. Fasten the fuse block in its bracket and bolt small fuse 6. Check for any interference with the wiring, throttle cable, transmission kick down cable, and hoses. It may be necessary to periodically tighten the strut tower hardware.