Resumo do conteúdo contido na página número 1
SyncMaster 242MP
Install Drivers Install Programs
Resumo do conteúdo contido na página número 2
Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Grounding to prevent an electric shock Power When not used for an extended period of time, set your computer to DPMS. If using a screen saver, set it to the active screen mode. Do not use a damaged or loose plug. This
Resumo do conteúdo contido na página número 3
Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause an electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage. This may cause an electric shock or fire. Do not connect too many extension cords or plugs to an outlet. This may
Resumo do conteúdo contido na página número 4
Dropping the product may cause damage to the product or personal injury. Set down the monitor carefully. The monitor could be damaged or broken. Do not place the monitor face down. The TFT-LCD surface may be damaged. Installing a wall bracket must be done by a qualified professional. Installation by unqualified personnel may result in injury. Always use the mounting device specified in the owner's manual. When installing the product, make sure to keep it away fr
Resumo do conteúdo contido na página número 5
Do not spray water or detergent directly on the monitor. This may cause damage, electric shock or fire. Use the recommended detergent with a smooth cloth. If the connector between the plug and the pin is dusty or dirty, clean it properly with a dry cloth. A dirty connector may cause an electric shock or fire. Contact the Service Center or Customer Center for interior cleaning once a year. Keep the product's interior clean. Dust which has accumulated in the interior ove
Resumo do conteúdo contido na página número 6
Disconnect the plug from the outlet during storms or lightening or if it is not used for a long period of time. Failure to do so may cause an electric shock or fire. Do not try to move the monitor by pulling only the wire or the signal cable. This may cause a breakdown, electric shock or fire due to damage to the cable. Do not move the monitor right or left by pulling only the wire or the signal cable. This may cause a breakdown, electric shock or fire due to damage to t
Resumo do conteúdo contido na página número 7
Adjust the resolution and frequency to the levels appropriate for the model. Inappropriate resolution may cause undesirable picture quality. 24 inch - 1920 X 1200 Keep the volume at a proper level when you use the headphones. Excessively loud volume levels may damage hearing. Watching the monitor continuously at a too close angle may result in eyesight damage. To ease eye strain, take at least a five-minute break after every hour of using . the monitor Do not us
Resumo do conteúdo contido na página número 8
This may cause a battery to break or leak and could lead to fire, injury, or contamination (damage). The battery (and rechargeable battery) are not ordinary refuse and must be returned for recycling purposes. The customer is responsible for returning the used or rechargeable battery for recycling purposes as the consumer of the battery. The customer can return the used or rechargeable battery to a nearby public recycling center or to a store selling the same type of the battery or
Resumo do conteúdo contido na página número 9
Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Monitor Manual Warranty Card User's Guide, Monitor Driver, Quick Setup Guide (Not available in all locations) Natural Color software Cable
Resumo do conteúdo contido na página número 10
D-Sub Cable Power Cord Radio Antenna Audio Cable DVI Cable Others Connector For more information > Remote Control Batteries (AAA X 2) Connecting TV Radio Antenna Adapter Side cover Speaker(Option) Speaker Speaker-cover Speaker-Stand Speaker Brackets Screws Use only for the mounting type Speaker-Audio cable (Black 4EA, Silver 4EA) installation.
Resumo do conteúdo contido na página número 11
Speaker-Side cover Front 1. MENU 2. CH 3. - VOL + 4. / FM RADIO 5. SOURCE 6. PIP 7. Power button 8. Power indicator 9. Remote Control Sensor 1. MENU Use this button to open the on-screen menu and exit from the menu screen or close screen adjustment menu. 2. CH Moves from one menu item to another vertically or adjusts selected menu values. In TV mode, selects TV channels. >>Click here to see an animation clip 3. - VOL + Moves from one
Resumo do conteúdo contido na página número 12
See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed or when left unattended for long periods. Rear Remove the rear monitor cover before connecting to an external device. When it is connected, replace the cover. (The configuration at the back of the monitor may vary from product to product.) 1. DVI/PC IN 1. DVI cable terminal (input) 2. D-SUB(15 p
Resumo do conteúdo contido na página número 13
3. EXT(RGB) External device terminal - Scart is mainly used in Europe. As for EXT(RGB) port of the Monitor, it makes TV or Video signal input and output. 4. AV IN 1. External device sound input terminal 2. External device (video) input terminal 3. External device (S-video) input terminal 4. FM radio antenna terminall 5. Headphone / R-SPEAKER-L / ANT IN 1. Headphone sound output terminal 2. Speaker sound output terminal 3. TV antenna terminal Fo
Resumo do conteúdo contido na página número 14
See Connecting the Monitor for further information regarding cable connections. Remote Control The performance of the remote control may be affected by a TV or other electronic device operated near the monitor, causing malfunction due to interference with frequency. 1. POWER 2. Number button 3. +100, -/-- 4.- + 5. MUTE 6. TTX/MIX 7. MENU 8. ENTER 9. FM RADIO 10. CH/P 11. SOURCE 12. INFO 13. EXIT 14. Up-Down Left-Right Buttons 15. AUTO 16. P.MODE,
Resumo do conteúdo contido na página número 15
2. Number button Selects TV channels in the TV mode. You may use this button in PIP mode as well. 3. +100 Press to select channels over 100. For example, to select channel 121, press "+100", then press "2" and "1". -/-- (One/Two-Digit channel selection ) Use to select a channel numbered ten or over. Press this button, and the "--" symbol is displayed. Enter the two-digit channel number. -/-- is mainly used in Europe. 4.- + Adjusts the audio volume. 5. MUTE Pauses (m
Resumo do conteúdo contido na página número 16
18. STILL Press the button once to freeze the screen. Press it again to unfreeze. 19. PIP Push the PIP button to turn PIP screen On/Off. 20. S.MODE ( Sound Mode ) When you press this button, current mode is displayed on the lower center of the screen. The Monitor has a built-in high fidelity stereo amplifier. Then push button again to circle through available preconfigured modes. ( Standard → Music → Movie → Speech → Custom ) 21. DUAL / MTS DUAL : STEREO/MONO, DUAL l / D
Resumo do conteúdo contido na página número 17
Connecting the Monitor Remove the rear monitor cover before connecting to an external device. When it is connected, replace the cover. 1. Connecting to a Computer 1. Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2-1. Using the D-sub (Analog) connector on the video card, Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 2-2. Using the D
Resumo do conteúdo contido na página número 18
5. You may enjoy clear and quality sound from the computer sound card using the monitor speakers. (You don't need to install any separate speakers for your computer.) You may get a blank screen depending on the type of video card you are using, if you connect simultaneously both the D-sub and DVI cables to one computer. If you connect properly your monitor using the DVI connector but get a blank or fuzzy screen, check to see if the monitor status is set to analogue. Press SOURCE button to
Resumo do conteúdo contido na página número 19
1. Input devices such as DVDs, VCRs or Camcorders are connected to the Video or S-Video terminal of the monitor using the S-Video cable. S-Video, RCA cable and EXT(RGB) cable are optional. 2. Connect the Audio (R) and Audio (L) terminals of a DVD, VCR or Camcorders to the monitor's R and L audio input terminals using audio cables. 3. Then, start the DVD, VCR or Camcorders with a DVD disc or tape inserted. 4. Select AV or S-Video using the button on the monitor. SOURCE 1-2.
Resumo do conteúdo contido na página número 20
1. Connect the CATV or antenna coaxial cable to the Antenna terminal on the rear of the monitor. You need to use a coaxial antenna cable. When using an interior antenna terminal: Check the antenna terminal on the wall first and connect the antenna cable. When using an outdoor antenna: If you are using an outdoor antenna, use a professional for installation if possible. To connect the RF cable to the antenna input terminal: Keep the copper wire portion of the RF cabl
