Resumo do conteúdo contido na página número 1
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION
LCD Television Users Guide
32" class (31.5" Diagonal)
LT-32EM20
HIGH-DEFINITION TELEVISION
Important Note:
In the spaces below, enter the model and serial number of your television (located at the rear of the television cabinet). Staple your
sales receipt or invoice to the inside cover of this guide. Keep this user’s guide in a convenient place for future reference. Keep the
carton and original packaging for fu
Resumo do conteúdo contido na página número 2
NTRODUCTION I Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. The lightning flash with arrowhead symbol, within an CAUTION equilateral triangle, is intended to alert the user to the RISK OF ELECTRIC SHOCK presence of uninsulated “dangerous voltage” within the apparatus’s enclosure
Resumo do conteúdo contido na página número 3
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. Make sure to leave a space of 3.2 inches (8cm) or more around this apparatus. Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same o
Resumo do conteúdo contido na página número 4
f f r r o o n n t t s s i i d d e e NTRODUCTION I Supplied Accessories remote control batteries Phillips pan screw for (RM-C-2150) (AA x 2) attaching the stand x 3 • If you need to replace these accessories, please refer to the part No. with the illustrations and call our toll free customer support line found on the cover of this manual. • Depending on your antenna system, you may need different types of combiners (mixers) or separators (splitters). Contact your local electronics store fo
Resumo do conteúdo contido na página número 5
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Features Contents • DTV/TV/CATV INTRODUCTION - You can use your remote control to select Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 channels which are broadcast in digital format and Trademark Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 conventional analog format. Also, cable su
Resumo do conteúdo contido na página número 6
NTRODUCTION I Buttons on the Remote Control 1. MUTE (p. 14) 8. INPUT SELECT (p. 15) Press to turn the sound on and off. Press to access connected external devices like a BD / DVD 2. Number buttons (p. 14) 8 player or VCR. • Press to select channels. 1 - (hyphen) 9 9. POWER (p. 13) • Press to shift the minor channel Press to turn the unit on and off. 10 from the major channel. 10. AUDIO (p. 15) 3. SETUP (p. 13) Digital Mode (DTV) 11 Press to display the main menu. • Press to select the audio
Resumo do conteúdo contido na página número 7
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Control Panel 1. POWER (p. 13) Press to turn the unit on and off. 2. INPUT SELECT/ENTER (p. 15) • Press to access connected external devices 1 like a BD / DVD player or VCR. 2 • Press to decide the command of setting when the menu is displayed. 3 K L 3. CHANNEL / (p. 14) Press to select channels or move up/down through 4 the main menu items. 4. VOLUME / (p. 14) 5 X Y Press to adjust the volume or move right (
Resumo do conteúdo contido na página número 8
REPARATION P Cables not included. Please purchase the necessary cables at your local store. Basic Connection This section describes how to connect the unit to an antenna, cable receiver or satellite box. Note: • Be sure your antenna or other device is connected properly before plugging in the AC power cord. [Antenna Connection] Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit. e.g.) VHF / UHF rear of this unit antenna RF coaxial cable or cable TV signal
Resumo do conteúdo contido na página número 9
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Cables not included. Please purchase the necessary cables at your local store. External Device Connection [HDMI Connection] HDMI (High-Definition Multimedia Interface) transports high definition video and multi-channel digital audio through a single cable. It ensures that the content sent from the source to the unit is of the highest possible resolution. Use an HDMI cable to connect the unit to external video dev
Resumo do conteúdo contido na página número 10
REPARATION P Cables not included. Please purchase the necessary cables at your local store. [Component Video Connection] RCA component video connection offers better picture quality for video devices connected to the unit. Use an RCA component video cable to connect the unit to external video devices equipped with component video output jack. If you connect to the unit’s COMPONENT1 or COMPONENT2 video input jack, connect an RCA audio cable to the audio L/R jack of COMPONENT1 or COMPONENT2 acco
Resumo do conteúdo contido na página número 11
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Cables not included. Please purchase the necessary cables at your local store. [Video Connection] RCA video connection offers standard picture quality for video devices connected to the unit. Use an RCA video cable to connect the unit to external video devices equipped with video output jack. If you connect to the unit’s VIDEO1 or VIDEO2 video input jack, connect an RCA audio cable to the audio L/R jack of VIDEO 1
Resumo do conteúdo contido na página número 12
REPARATION P Cables not included. Please purchase the necessary cables at your local store. [PC Connection] This unit is equipped with a PC input jack. If you connect this unit to your PC, you can use this unit as a computer monitor. e.g.) VGA cable VGA cable should be rear of this unit with ferrite core. mini-plug audio cable PC-IN AUDIO HDMI-IN L AUDIO personal computer R The following signals can be displayed: Format Resolution V. Frequency SVGA 800 x 600 60Hz XGA 1,024 x 768 60Hz 1,280
Resumo do conteúdo contido na página número 13
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION These operations are accessible by remote control. Some may also be accessible by controls on the main unit. Initial Setup This section will guide you through the unit’s initial setting which includes Use [Cursor s / B] to select the desired mode for 4 selecting a language for your on-screen menu and auto channel scan, energy saving, then press [ENTER]. which automatically scans and memorizes viewable channels.
Resumo do conteúdo contido na página número 14
ATCHING TV W Channel Selection Volume Adjustment Select channels by using [CHANNEL / ] or [the Number buttons]. This section describes how to adjust the volume. The mute function, which turns the sound off and on, is also described. • To select the memorized channels, use [CHANNEL / ] or [the Number buttons]. • To select the non-memorized channels, use Use [VOLUME / ] to adjust the audio volume. [the Number buttons]. Volume 20 To Use [the Number buttons] TV • The volume bar w
Resumo do conteúdo contido na página número 15
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Still Mode Switching Audio Mode You can pause the image shown on the TV screen. This section describes how to switch the audio in the analog mode and how to switch the audio language in the digital mode. TV Press [STILL] to pause the image shown on the TV Press [AUDIO] to display the currently selected screen. audio mode. While receiving an MTS broadcast, press repeatedly to cycle through the available au
Resumo do conteúdo contido na página número 16
ATCHING TV W Screen Information You can display the currently selected channel or other information such as the audio mode on the TV screen. DTV TV In the digital mode, the detailed broadcasting information for the current In the analog mode, the current channel number and the audio mode are channel such as program title, program guides are displayed. displayed. Press [INFO] to display the details of the currently Press [INFO]. selected program. 6 SAP / STEREO 480i 480i SD SD 4:3 4:3
Resumo do conteúdo contido na página número 17
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION TV Screen Display Mode 4 types of display modes can be selected when the broadcasting station is sending 4:3 or 16:9 video signal. And 3 types of display modes can be selected for PC input signal. For 16:9 video signal Press [SCREEN MODE] repeatedly to switch the TV aspect ratio. Full Zoom (normal) For 4:3 video signal Full Sidebar Cinema Expand (normal) Full Display a 16:9 picture at its original size. Zoom
Resumo do conteúdo contido na página número 18
PTIONAL SETTING O Main Menu Auto Channel Scan This section describes the overview of the main menu displayed when you If you switch wires (e.g., between antenna and CATV) or if you move the press [SETUP]. For more details, see the reference page for each item. unit to a different area after the initial setup, or if you restore the DTV The main menu consists of the function setting items below. channel you deleted, you will need to perform auto channel scan. Before you begin: Make sure if the
Resumo do conteúdo contido na página número 19
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Channel List The channels selected here can be skipped when selecting the channels using [CHANNEL / ]. Those channels can still be selected with [the Number buttons]. Press [SETUP] to display the main menu. 1 Note: • After setting “Auto Channel Scan”, using [CHANNEL / ] on the remote control skips unavailable programs automatically. • If you connect the cable system directly, contact the CATV Use [Curso
Resumo do conteúdo contido na página número 20
PTIONAL SETTING O Manual Register Antenna Confirmation The manual register function lets you add the channels that were not scanned DTV by the auto channel scan due to the reception condition at the initial setup. This function lets you check the digital signal strength of each channel. Press [SETUP] to display the main menu. Press [SETUP] to display the main menu. 1 1 Use [Cursor K/ L] to select “CHANNEL”, then press 2 Use [Cursor K/ L] to select “CHANNEL”, then press 2 [ENTER].
