Manual do usuário Audiovox 50-0312x SERIES

Resumo do conteúdo contido na página número 1

FOR
50 - 0312x SERIES 1181338












4. Razor
5. 1" Hole saw or equiv. - 7180 or equiv.)





-

Printed in the U.S.A
0048A INSTALLATION INSTRUCTION # 44
Nov. 8, 1999
6. Audiovox VCP (AVP
knife or similar 3. Awl or similar tool
2. Powered screwdriver or drill with adapter 1. #2 Phillips screwdriver
Materials/ Tools

Resumo do conteúdo contido na página número 2

SCREW, # 8 X 1 2 2 1 VELCRO TAPE, 1" X 10" 1 3 VELCRO TAPE, 1" X 5" 4 1 5 1 - 0048A Printed in the U.S.A.

Resumo do conteúdo contido na página número 3

1. 2. seat track. See Figure 1. 3. Caution: Before indicated. - - to the floor. Route the power lead to a fused etc.) to 3 FIGURE 3 5. Make (3) three cuts and fold carpet as shown in Figure 3. II. INSTALLATION OF HOUSING FIGURE 2 included with the antenna. insta

Resumo do conteúdo contido na página número 4

GURE 4 8. 9. Apply 10" Velcro tape (item 3 pg 2) to top rear 4 FIGURE 6 of VCP. See Figure 6. y 5" Velcro tape (item 4 pg 2) to left side 10. Appl of VCP. See Figure 6. right side of VCP. See Figure 6. Remove and discard (2) two screws from the FIGURE 5 See Figure 5. 7. Install rear seat t

Resumo do conteúdo contido na página número 5

your area. 13. Install (2) two # 8 X 3/4" screws (item 1 pg 2) Do not tem 5 pg 2). Make sure that Velcro tape adheres to cover. See Fig. 8. 5 FIGURE 9 with VCP. See Figure 9. travel to make sure that there is no interference 15. Install rear seat in original manner. Check