Resumo do conteúdo contido na página número 1
4-101-557-12 (1)
LCD Color TV
Operating Instructions
Before operating the unit, please read this manual thoroughly
and retain it for future reference.
Owner’s Record
The model and serial numbers are located at the rear of the TV and on the carton
(white label). Record these numbers in the spaces provided below. Refer to them
whenever you call upon your Sony dealer regarding this product.
Model No. ________________
Serial No. ________________
KLV-21SG2
© 2003 Sony Corporation
Resumo do conteúdo contido na página número 2
NOTIFICATION WARNING This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits To reduce the risk of fire or shock hazard, are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate do not expose the TV to rain or moisture. radio frequency energy and, if not installed and used in accordance with the instructions, m
Resumo do conteúdo contido na página número 3
Important Safety Instructions Handling the LCD screen 1 Read these instructions. s Do not leave the LCD screen facing the sun as it can damage the LCD 2 Keep these instructions. screen. Take care when you place the TV by a window. s Do not push on or scratch the LCD screen. Do not place a heavy object 3 Heed all warnings. on the LCD screen. This may cause the screen to lose uniformity or cause LCD panel malfunctions. 4 Follow all instructions. s If the TV is used in a cold place, a smear may app
Resumo do conteúdo contido na página número 4
Table of Contents Table of Contents Watching the TV Installing and Connecting the TV Watching the TV ...................................... 23 Unpacking .................................................. 6 Watching with closed caption ........... 24 Inserting Batteries into the Remote Control ................................................... 6 Selecting the Picture Mode..................... 24 Identifying Front and Rear Connectors ... 7 Selecting the Effect Mode ....................... 25 Basi
Resumo do conteúdo contido na página número 5
Table of Contents “Memory Stick” Additional Information About the “Memory Stick” ...................... 52 Troubleshooting ...................................... 72 Features of the Memory Stick Home ..... 54 Self-diagnosis function ..................... 72 Inserting and Removing a Trouble symptoms and remedies ..... 72 “Memory Stick” ................................... 56 Specifications .......................................... 75 Inserting a “Memory Stick” ............... 56 Index to Parts and
Resumo do conteúdo contido na página número 6
Installing and Connecting the TV Installing and Connecting the TV Unpacking When you unpack this unit, make sure it includes the following: Remote control (1) and AC power cord (1) size AA batteries (2) Rear cover (1) 75-ohm coaxial cable (1) Operating Instructions Warranty Card Product Registration Inserting Batteries into the Remote Control Insert two size AA batteries (supplied) by matching the + and – on the batteries to the diagram inside the remote control’s battery compartment. Notes • Re
Resumo do conteúdo contido na página número 7
Installing and Connecting the TV Identifying Front and Rear Connectors TV front panel 1 1 VIDEO 2 IN (pages 12 - 14, 17) Connects to the output jacks of your VCR or VIDEO 2 IN other video equipment. S VIDEO VIDEO 2 Headphones jack L Connects to your headphones. AUDIO R If your headphones do not match the jack, use a suitable plug adaptor (not supplied). 3 Memory Stick slot (page 56) 3 2 Side view Behind the cover Push to open the cover. Rear of TV Side view Side view 4 VHF/UHF (pages 8, 12 - 14)
Resumo do conteúdo contido na página número 8
Installing and Connecting the TV Connecting directly to cable or an Basic Connections antenna (Connecting Cable TV or VHF only or VHF/UHF or cable an Antenna) 75-ohm coaxial Rear of TV cable (supplied) VHF/UHF jack Connector types Note You may find it necessary to use some of the It is strongly recommended to connect the antenna using a 75- following connector types during set up. ohm coaxial cable to get optimum picture quality. A 300-ohm twin lead cable can be easily affected by radio noise an
Resumo do conteúdo contido na página número 9
Installing and Connecting the TV Connecting the Power Cord Complete other connections prior to connecting the power cord. 1 Connect the power cord to the AC IN connector of the TV. 2 Connect the other plug of the power cord to a wall outlet. For 120 V AC Wall outlet AC power cord (supplied) 9
Resumo do conteúdo contido na página número 10
Installing and Connecting the TV 3 Attach the supplied rear cover, as needed. Bundling Cords and See “Attaching the Rear Cover” on page 11. Cables Note If the cables are not neatly stored, you may not be able to attach You can organize the cables in the back of the TV. the rear cover. 1 Bundle the cables and secure them with the clips on both sides of the TV. Clips Notes • It may not be possible to fasten with clips if cables are too thick. • If all the cables cannot be stored inside, you may le
Resumo do conteúdo contido na página número 11
Installing and Connecting the TV Attaching the Rear Adjusting the Viewing Cover Angle of the TV Hold the rear cover as illustrated below, fitting the You can adjust the angle to avoid the reflection of four pegs on the rear cover into the corresponding light and get a better view of the TV. holes on the TV, then push the rear cover back onto the TV. Note When adjusting the angle, steady the base of the stand with your hand to prevent the TV from becoming separated from the stand. Be careful not
Resumo do conteúdo contido na página número 12
Installing and Connecting the TV Connecting a VCR and Cable TV Use this hookup if: • You subscribe to a cable TV system that does not require a cable box. Disconnect all power sources before making any connections. 1 Connect the CATV cable to the VCR’s IN jack. 2 Using the supplied 75-ohm coaxial cable, connect the VCR’s OUT jack to the TV’s VHF/UHF jack. 3 Using AUDIO and S VIDEO cables, connect the VCR’s AUDIO and S VIDEO OUT jacks to the TV’s AUDIO and S VIDEO IN jacks. Rear of TV 75-ohm 75-o
Resumo do conteúdo contido na página número 13
Installing and Connecting the TV Connecting a Satellite Receiver Disconnect all power sources before making any connections. 1 Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack. 2 Using AUDIO and S VIDEO cables, connect the satellite receiver’s AUDIO and S VIDEO OUT jacks to the TV’s AUDIO and S VIDEO IN jacks. 3 Connect the supplied 75-ohm coaxial cable from your cable or antenna to the TV’s VHF/UHF jack. Rear of TV 75-ohm coaxial cable (supplied) S VIDEO Satelli
Resumo do conteúdo contido na página número 14
Installing and Connecting the TV Connecting a Satellite Receiver with a VCR Disconnect all power sources before making any connections. 1 Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack. 2 Connect the CATV cable to the VCR’s VHF/UHF IN jack. 3 Using the supplied 75-ohm coaxial cable, connect the VCR’s OUT jack to the TV’s VHF/UHF jack. 4 Using AUDIO and S VIDEO cables, connect the satellite receiver’s AUDIO and S VIDEO OUT jacks to the VCR’s AUDIO and S VIDEO IN
Resumo do conteúdo contido na página número 15
Installing and Connecting the TV Connecting an Audio Receiver Disconnect all power sources before making any connections. Using an AUDIO cable, connect the TV’s AUDIO OUT jacks to the audio receiver’s AUDIO IN jacks. Rear of TV AUDIO-L (white) AUDIO-R (red) AUDIO cable (not supplied) Audio input Audio receiver (Compact AV system DAV-FC9, etc.) When using your audio system speakers Set “Speaker” in the (Audio) menu to “Off.” The TV’s sound is not output from the AUDIO OUT jacks when “Speaker” is
Resumo do conteúdo contido na página número 16
Installing and Connecting the TV Connecting a DVD Player with Component Video Connectors This is the preferred hookup to use if: •Your DVD player has component (Y, PB, PR) jacks. Disconnect all power sources before making any connections. 1 Using a component video cable, connect the DVD player’s Y, PB and PR jacks to the Y, PB and PR jacks on the TV. Use the VIDEO 3 IN connections. Tip The Y, PB and PR jacks on your DVD player are sometimes labeled as Y, CB and CR, or Y, B-Y and R-Y. If so, conn
Resumo do conteúdo contido na página número 17
Installing and Connecting the TV Connecting a DVD Player with A/V Connectors Use this hookup if: •Your DVD player does not have component (Y, PB, PR) jacks. Tip If your DVD player has component video output connectors, for best picture quality, use the connection described on page 16. The Y, PB and PR jacks on your DVD player are sometimes labeled as Y, CB and CR, or Y, B-Y and R-Y. If so, connect the cables to the matching colors. Disconnect all power sources before making any connections. 1 Us
Resumo do conteúdo contido na página número 18
Installing and Connecting the TV Connecting a Digital TV Receiver Disconnect all power sources before making any connections. 1 Using a component video cable, connect the Digital TV receiver’s Y, PB and PR jacks to the Y, PB and PR jacks on the TV. Use the VIDEO 3 IN connections. Note Component video (Y, PB, PR) connection is necessary to view 480p, 720p, and 1080i formats. Note that this TV displays all format types of picture in a resolution of 1,024 dots × 768 lines. 2 Using an AUDIO cable, c
Resumo do conteúdo contido na página número 19
Installing and Connecting the TV Connecting a Digital Satellite Receiver Disconnect all power sources before making any connections. 1 Using a component video cable, connect the Digital Satellite Receiver’s Y, PB and PR jacks to the Y, PB and PR jacks on the TV. Use the VIDEO 3 IN connections. Note Component video (Y, PB, PR) connection is necessary to view 480p, 720p, and 1080i formats. Note that this TV displays all format types of picture in a resolution of 1,024 dots × 768 lines. 2 Using an
Resumo do conteúdo contido na página número 20
Installing and Connecting the TV 2 Press CH+ on the remote control or on the side Setting the Channels panel of your TV to perform Auto Program. When all the receivable channels are stored, the After you finish connecting your TV, you can run “Channel Skip/Add” menu appears. Auto Program to set up your channels. The Auto Setup menu appears when you turn your TV on for Auto Program is set to scan cable TV channels by the first time after installing it. default. To watch UHF channels with an anten
