Manual do usuário Minolta GX-1

Resumo do conteúdo contido na página número 1

Minolta Co., Ltd. 3-13, 2-Chome, Azuchi-Machi, Chuo-Ku, Osaka 541-8556, Japan
Minolta GmbH Kurt-Fischer-Strasse 50, D-22923 Ahrensburg, Germany
Minolta France S.A. 365 Route de Saint-Germain, F-78420 Carrieres-Sur-Seine, France
Minolta (UK) Limited Rooksley Park, Precedent Drive, Rooksley, Milton Keynes, MK13 8HF, England
Minolta Austria Ges. m.b.H. Amalienstrasse 59-61, A-1131 Wien, Austria
Minolta Camera Benelux B.V. Zonnebaan 39, P.O. Box 6000, NL-3600 HA Maarssen, The Netherlands
Belgium Bra

Resumo do conteúdo contido na página número 2

Thank you for purchasing a Minolta Advanced Photo System™ camera. To take part New print formats… in your active lifestyle, this camera was designed to be rugged and easy to use. Classic C print, wider H print, and panorama P print Before using your camera, familiarize yourself with the names and locations of the formats are available with Advanced Photo System camera controls and read this manual thoroughly. cameras. *Advanced Photo System™ is a trademark of the five system developing companies

Resumo do conteúdo contido na página número 3

INSTALLING THE BATTERY Your camera uses one 3-volt CR2 lithium battery to supply power for all camera 2. Insert a new battery into the chamber as operations. Please read the warnings in the Safety Cautions section of this manual indicated by the + and - marks. as well as those supplied by the battery manufacturer. 3. Close the battery-chamber door and turn the • If film is in the camera when the battery is replaced, install a new battery immediately battery-chamber lock to the close position. af

Resumo do conteúdo contido na página número 4

SELF TIMER The self-timer delays release of the shutter for approximately ten seconds. • When the self-timer is selected, the flash will fire every time a picture is taken. • The print format is set to H when the self-timer is selected. 1. Mount the camera on the Handy Tripod 3. Frame your subject(s) inside the H print (optional) and place on a level surface. image frame. 4. Press the shutter-release button all-the-way 2. Turn the command switch to . • St will appear in the data panel. down to t