Resumo do conteúdo contido na página número 1
Fgfgd
PSR1000/2000
USING “ONE TOUCH” SETTINGS |
¤¤¤¤¤¤¤¤¤¤¤¤ TOP FEATURES ¤¤¤¤¤¤¤¤¤¤¤¤
1) Select a Style (see above).
• Microphone input with Vocal Harmony (PSR2000)
2) The 4 [ONE TOUCH SETTING] buttons will now call
up 4 appropriate Voices for the selected Style.
• Lyric display for song disks with lyrics
• Custom lyric input for User Songs (New)
MUSIC FINDER
Resumo do conteúdo contido na página número 2
PSR1000/2000 STEP BY STEP PROCEDURES I. Copying Files from one Floppy Disk to Another Floppy Disk II. Creating a User Style III. Data will not Save Properly IV. Editing Song Track Parameters such as Voice and Volume V. Enabling an External MIDI Device to Control Keyboard Sections VI. Factory Reset Procedure VII. Loading Music Finder Files VIII. Making Global Settings for Voices IX. Making Songs Play Continuously X. Recording and Saving a Song XI. Recording to
Resumo do conteúdo contido na página número 3
I. Copying Files from one Floppy Disk to Another Floppy Disk IMPORTANT: Commercially available music data is subject to protection by copyright laws. Copying commercially available data is strictly prohibited, except for personal use. Some music software is purposely copy-protected and cannot be copied. To copy specific files from disk to disk, the files must first be copied from the ‘source’ floppy disk to the 'USER' page, before it is possible to 'paste' them to the ‘destination
Resumo do conteúdo contido na página número 4
To duplicate entire disks, the ‘DISK TO DISK COPY’ feature may be used: 1) Insert the 'source' floppy disk containing the files to be copied. 2) Press the [FUNCTION] button. 3) Press the [I] ‘UTILITY’ button. 4) Use the [BACK] and [NEXT] buttons to select the ‘DISK’ page in the screen. 5) Press the [F] ‘DISK TO DISK COPY’ button. 6) Press the [G] ‘OK’ button. 7) When prompted on the screen, insert the destination disk. 8) Press the [G] ‘OK’ button. When the scre
Resumo do conteúdo contido na página número 5
II. Creating a User Style The following procedure describes how to create a User Style from scratch. This is useful when the PSR1000/2000 does not have a built-in Style which fits the style of music that the user wants to play. Creating a User Style from scratch is also useful to create custom drum accompaniments. A Style can be created completely from scratch by first selecting 'NEW STYLE' from the 'BASIC' section of 'STYLE CREATOR', then recording to the 8 Auto Accompaniment
Resumo do conteúdo contido na página número 6
or [F] - [I] buttons twice; the chosen Part may then be selected from any of the existing Styles, using the [A] - [J] buttons. EXAMPLE: The RHYTHM2 Part from the Style, '60'sGtrPop' may be used for the RHYTHM2 Part in the New Style. 3) Press the [EXIT] button to return to the 'ASSEMBLY' page. 4) Repeat steps 2 - 3 for the remaining 7 Parts of the Style, if desired. 5) Press the [BACK] button to return to the 'BASIC' page. Recording an original Part onto a Channel from
Resumo do conteúdo contido na página número 7
Saving the User Style: 1) Press the [I] 'SAVE' button to select a destination for storing the User Style. 2) Use the [BACK] and [NEXT] buttons to display the 'USER' or 'FLOPPY DISK' page. 3) Press the '6' [v] toggle button to name the User Style. 4) Use the toggle buttons to select the characters for the User Style name. 5) When finished, press the '8' [^] 'OK' toggle button. The User Style is now saved. 6) Press the [EXIT] button twice to return to the 'MAIN' screen.
Resumo do conteúdo contido na página número 8
III. Data will not Save Properly The Internal RAM Memory in the PSR1000/2000 is "volatile." Any user-stored data in this memory location such as Songs, Styles, System Setup data, Music Database information, etc. must be backed up to floppy disk, if the unit will be unplugged from an AC outlet for more than a week. If the unit is left unplugged for over a week, the data may be lost. Another way that data may be lost, is if the storing procedure for System Setup data is performed in
Resumo do conteúdo contido na página número 9
IV. Editing Song Track Parameters such as Voice and Volume Individual Song Track Parameters such as Voice, Volume, Pan, Tempo, etc. can be changed by selecting the 'MIXING CONSOLE' function from the 'SET UP' view in 'SONG CREATOR'. Changing the Voice (for Example) on a Track: 1) Load the Song into the PSR1000/2000. 2) Press the [DIGITAL RECORDING] button. 3) Press the [A] 'SONG CREATOR' button. 4) Use the [BACK] and [NEXT] buttons to display the 'CHANNEL' page. 5) Use
Resumo do conteúdo contido na página número 10
5) Press the [F] 'YES' button to overwrite the old Song version with the new one. Owner's Manual, p. 102-104 V. Enabling an External MIDI Device to Control Keyboard Sections The PSR1000/2000 can be configured so that the 'MAIN', 'LAYER' and 'LEFT' Voice sections can be individually controlled by an external MIDI device. It can also be configured so that an external MIDI device can control it the same way it's own keyboard does (controlling whatever sections are active on the fro
Resumo do conteúdo contido na página número 11
b) Use the [A] '^', [B] 'v', and [1] - [8] toggle buttons to select 'ON' for the desired MIDI Channel (the Channel being transmitted by the external MIDI device) in the screen. 11) Press the [EXIT] button once. 12) Press the [NEXT] button to select the 'USER' page in the 'MIDI' screen. 13) Use the [A] - [J] buttons to select a destination to save the edited MIDI Setup to. 14) Press the ‘6’ [v] 'SAVE' button. 15) Use the [1] - [8] toggle buttons to name the edi
Resumo do conteúdo contido na página número 12
VI. Factory Reset Procedure The standard Yamaha factory reset procedure for many PSR Series keyboards will initialize the PSR1000/2000 System Setup Data, but not other data such as the MIDI Setup, Music Finder, and User Files/Folders; to do this, further steps are required (see below). To Reset System Setup Only to Original Factory Settings: 1) Turn OFF the keyboard. 2) Press and hold down the rightmost white key (C) while turning ON the keyboard. 3) Once the power
Resumo do conteúdo contido na página número 13
VII. Loading Music Finder Files into a PSR1000/2000 Custom MUSIC FINDER files can be loaded into a PSR1000/2000, to replace the file containing the original factory selections. 1) If the file is on a floppy disk, insert the floppy disk. 2) Press the [FUNCTION] button. 3) Press the [I] 'UTILITY' button. 4) Use the [BACK] and [NEXT] buttons to display the 'SYSTEM RESET' page. 5) Press the [I] 'MUSIC FINDER' button. 6) Select the new MUSIC FINDER file. 7) Press the [G]
Resumo do conteúdo contido na página número 14
VIII. Making Global Settings for Voices If Voice settings such as Effects, EQ and Harmony are changed for a Voice, these settings normally will reset to something else when a different Voice is chosen. However settings can be made to affect all Voices globally, by editing the 'VOICE SET' page. For this example, all Effects will be turned OFF globally for all Voices: 1) Press the [FUNCTION] button. 2) Press the [E] 'REGIST. SEQUENCE / FREEZE / VOICE SET' button. 3) Use the [
Resumo do conteúdo contido na página número 15
IX. Making Songs Play Continuously In the 'SONG SETTING' screen, the 'Song Chain Play' function can be turned ON, to automatically play Songs consecutively and continuously. 1) Press and hold the [DIRECT ACCESS] button, then press the [REPEAT] button. 2) Press the [I] button to select SONG CHAIN PLAY 'ON' in the screen. Owner's Manual, p. 137
Resumo do conteúdo contido na página número 16
X. Recording and Saving a Song The PSR1000/2000 can record Songs with up to 16 separate Channels (tracks), each Channel using a different Voice. There are two different methods for recording; 'Quick Recording' for recording a Song in one or two takes, and 'Multi Recording' for recording multiple Channels by as little as one Channel at a time. Quick Recording In the ‘SONG’ section of the front panel: 1) Press and hold [REC], then press [TOP] to create a new Song. 2) Release th
Resumo do conteúdo contido na página número 17
b) Use the [C] ‘^’ and [D] ‘v’ buttons to select a Part. 5) To record multiple Channels/Parts simultaneously, repeat steps 2 – 4. 6) To start recording, begin playing the keyboard, or press the silver [START/STOP] button in the ‘SONG’ section of the front panel. NOTE: When recording Auto Accompaniment Parts from a Style, it is a good idea to turn ON the [INTRO] button and [SYNC. START] button first (red LED illuminates on both), and then play the chords for the Style to trigger
Resumo do conteúdo contido na página número 18
XI. Recording to PSR1000/2000 Sequencer from External MIDI Source The on-board sequencer of the PSR1000/2000 can be used to record MIDI data from external sources, such as MIDI bass pedals, keyboards and hardware or computer-based sequencers. This is done by assigning the desired MIDI Receive Channels to 'Keyboard' mode. 1) Press the [FUNCTION] button. 2) Press the [H] ‘MIDI’ button. 3) Use the [BACK] and [NEXT] buttons to display the ‘PRESET’ page in the screen. 4
Resumo do conteúdo contido na página número 19
XII. Saving and Loading Registrations Registration settings are saved in Banks of 8 to either the internal 'USER' memory, or the 'FLOPPY DISK' drive. For further organization, ‘Folders’ can be created and named, then multiple Registration Bank ‘Files’ can be organized within each Folder. This hierarchical method is similar to that used in Microsoft Windows; Folders and Files may be moved around using the familiar CUT / COPY / PASTE / DELETE functions. Saving Registrations: 1) To
Resumo do conteúdo contido na página número 20
Bank ‘File’ containing the current 8 Registrations that are stored to the 8 ‘REGISTRATION MEMORY’ buttons. 9) Use the [1] - [8] toggle buttons under the screen to name the Registration Bank ‘File’. 10) Press the [8 ^] 'OK' button to save the Registration Bank ‘File’ into the chosen memory location. 11) To name the 8 individual Registrations contained in the Registration Bank ‘File’, do the following: a) Press the [8 ^] 'EDIT' button. b) Press the [1 v
