Resumo do conteúdo contido na página número 13
DVR-X1 User Manual 7.3 Date / Time When entering the main menu select Date DATE / TIME / Time and press the key: DATE FORMAT YY/MM/DD Press <←>、<→> key to move the cursor DATE ON 02/01/01 TIME ON Press <＋>、<－> key to make changes 20:30:00 Press key to return to the previous LOCATION RIGHT BOTTOM menu. Press key to skip over the main menu (Image display). Time and date for the on-screen calendar and clock is set
Resumo do conteúdo contido na página número 14
DVR-X1 User Manual a. LEFT TOP b. RIGHT TOP c. LEFT BOTTOM d. RIGHT BOTTOM e. TOP f. BOTTOM When recording, date / time will be stored together with the image. Please try and prevent the constant changing of date / time setup. Thus, to prevent any unnecessary error to occur. 13
Resumo do conteúdo contido na página número 15
DVR-X1 User Manual 7.4 Record Setting When entering the main menu, select RECORD SETTING Record Setting and press the key to enter the menu： QUALITY HIGH RESOLUTION 720X240 REC RATE 10 FPS Press <←>、<→> key to move the cursor DISK FULL OVERWRITE AUDIO IN OFF Press <＋>、<－> key to make changes Press key to return to the previous RECORD TIME page. TOTAL TIME : 53HR Press key to skip over the main REMAINING TIME : 33HR m
Resumo do conteúdo contido na página número 16
DVR-X1 User Manual Stop : When the disk is full it stops recording (screen display disk full message warning). Audio In： ON ：Audio recording “ON”. OFF：Audio recording ”OFF”. Record Time： Total Time：According to resolution, the HDD Capacity and the recording rate reflects the total available recording time. Remaining Time：According to resolution, the HDD Capacity and the recording rate reflects the remaining recoding time. 15
Resumo do conteúdo contido na página número 17
DVR-X1 User Manual 7.5 Record Mode In the Main Menu move the cursor toward Record Mode, press key to enter the recording mode display: RECORD MODE SCHEDULE RECORDING REC BEGIN / END OFF 20:00 / 08:00 MOTION DETECTION RECORDING REC BEGIN / END SEN GRID OFF 20:00 / 08:00 3 SET SENSOR INPUT RECORDING REC BEGIN / END SEN TYPE OFF 20:00 / 08:00 3 NC POST ALARM TIME : 10 SEC
Resumo do conteúdo contido na página número 18
DVR-X1 User Manual End ： Ending time for recording. ＊ Example: For 24H recording, the settings of the begin time must be the same as the ending time (enter 06:00 am – 06:00am) For other time settings, recording time from 08:00 am to 21:00 pm (enter 08:00 – 21:00). b. Motion Detection Recording: According to the schedule time you can set the camera for motion detection recording. REC： ON ： For Motion Detection Recording “ON”. OFF： For Motion Detectio
Resumo do conteúdo contido na página número 19
DVR-X1 User Manual Press <←>、<→> key to move the cursor Press <＋>、<－> key to switch ON/OFF the motion detection area. Press key to return to the previous page. Press key to skip over the main menu. c. Sensor Input Recording: According to the schedule time, to set the camera for sensor input recording. REC： ON ： For Sensor Input Recording “ON”. OFF： For Sensor Input Recording “OFF”. ＊ key does not work durin
Resumo do conteúdo contido na página número 20
DVR-X1 User Manual (Sensor triggers the alarm and starts recording after 0.2 second) 2: 0.5 Sec. (Sensor triggers the alarm and starts recording after 0.5 second) 3: 1 Sec. (Sensor triggers the alarm and starts recording after 1 second) 4: 2 Sec. (Sensor triggers the alarm and starts recording after 2 second) 5: 5 Sec. (Sensor triggers the alarm and starts recording after 5 second) Sensor Type： NC → Normal-close sensor ( TTL level input ) Set to NC,
