Resumo do conteúdo contido na página número 1
DVR M-series MPEG-4 DVR System
User’s Manual
rel. 02052007
Version 1.2
Optiview
Resumo do conteúdo contido na página número 2
User’s Manual 2
Resumo do conteúdo contido na página número 3
User’s Manual Caution and Preventive Tips • Take care not to drop the unit or subject the unit to major shocks or jolts. • Do not place this unit on an unstable stand, bracket or mount. • This unit is designed for indoor use only. Do not place the unit near water or in other extremely humid conditions. • This unit should not be placed in a built-in installation unless proper ventilation is provided. • Please check the used type of power source before you plug and operate the unit; AC10
Resumo do conteúdo contido na página número 4
User’s Manual Important Information Before proceeding, please read and observe all instructions and warnings in this manual. Retain this manual with the original bill of sale for future reference and, if necessary, warranty service. When unpacking your unit, check for missing or damaged items. If any item is missing, or if damage is evident, DO NOT INSTALL OR OPERATE THIS PRODUCT. Contact your dealer for assistance. Rack Mounting Consult with the supplier or manufacturer
Resumo do conteúdo contido na página número 5
User’s Manual Table of Content 1. Overview .......................................................................................................................7 1.1 Product Key Features ..........................................................................................8 1.2 Product Application Diagram................................................................................9 2. System Setup................................................................................
Resumo do conteúdo contido na página número 6
User’s Manual 4.4.2 To export normal video .........................................................................29 4.4.3 To Export event video...........................................................................30 4.5 Deleting Recorded Video...................................................................................30 4.6 Dome Control.....................................................................................................31 4.6.1 Dome Connection.
Resumo do conteúdo contido na página número 7
User’s Manual 1. Overview The MPEG-4 DVR is an integrated digital video recorder that combines the features of a time-lapse audio / video recorder, a multiplexer, and a video server to create a single security CCTV solution. Its outstanding triplex operation enables users to view live or playback recorded video, and remote access through network simultaneously, while recording other video, and to view wanted recorded video instantly by entering the time and date or selecting recorde
Resumo do conteúdo contido na página número 8
User’s Manual MPEG-4 DVR – 16ch 1.1 Product Key Features The MPEG-4 DVR offers advanced features not typically found in standard multiplexers; it integrates the full features of a DVR, multiplexer and video server (by using the software DVRRemote). The key features of MPEG-4 DVR are listed as follows. • MPEG-4 high quality compression, 5~10 times smaller than MJPEG • Triplex operation (recording, playback and network access) • Remote monitoring, instant recording and
Resumo do conteúdo contido na página número 9
User’s Manual 1.2 Product Application Diagram Connect the unit with other devices as shown in the system diagram to complete a video surveillance solution. The figure shows also the expandability and flexibility of this digital recording system. 2. System Setup The notices and introduction on system installation will be described particularly in this chapter. Please follow the description to operate the unit. In order to prevent the unit from data loss and system damage that
Resumo do conteúdo contido na página número 10
User’s Manual The unit utilizes heat-conducting techniques to transfer internal heat to the case, especially to the bottom side of the unit. NOTE: Be sure not to remove the rubber feet, and always leave a space for air ventilation on the unit’s bottom side. 2.2 Selecting Video Format The MPEG-4 DVR is designed to operate under either NTSC or PAL video formats. The switch is positioned on the rear panel. 2.3 Connecting Devices to the Unit This section lists some
Resumo do conteúdo contido na página número 11
User’s Manual 2.4 Rear Panel Connections There are various connectors on the rear panel used for MPEG-4 DVR installations. The following figure shows the connectors by name; and followed by the detailed description of each connector. LAN Connector (RJ-45) The MPEG-4 DVR is capable of networking. The LAN port opens the door of MPEG-4 DVR to Ethernet. USB Connector There is a USB 2.0 port on the rear panel for users to connect external USB ® devices to the unit, such as ThumbD
Resumo do conteúdo contido na página número 12
User’s Manual Video Input A group of BNC connectors are available for video input streams from installed cameras. Alarm I/O & RS485 The unit provides an alarm I/O and RS485 port that offers user the flexibility required to connect the unit to the other device. The definitions of pins are listed in the below table: Pin Definition for 4ch-Model: Pin Definition Pin Definition 1 ALARM OUT O 9 Alarm Out C ALARM OUT COM GND 2 10 3 RS485 D/R+ 11 - RS485 D/R- - 4 12 5
Resumo do conteúdo contido na página número 13
User’s Manual UTP Input (for 4ch & 8ch models only) Short for Unshielded Twisted Pair, which is a popular type of cable. Due to its low cost, UTP cabling here is used for replacing BNC cabling. There are plenty of UTP connectors positioned on the rear panel of each unit. Next to these connectors places a switch used to enable or disable this function. Each switch (4ch DVR only has one switch and 4ch/ 8ch DVR has two) has four DIP switches on it. These DIP switches are named by number
Resumo do conteúdo contido na página número 14
User’s Manual 3.1 Front Panel Introduction The front panel controls enable user to control the unit and preset the programmable functions. 3.1.1 LED Definition The MPEG-4 DVR LEDs on the front panel are described as follows. IR LED (Green) The Led blinks when you commend using the attached Remote Controller. Power LED (Green) The LED lit during the period when the correct power is connected. Network LED (Green) The LED should be lit when MPEG-4 DVR is conne
Resumo do conteúdo contido na página número 15
User’s Manual 3.1.2 Function Keys The MPEG-4 DVR functional keys on the front panel for normal operation are described as follows. CHANNEL • When in both Live and Playback modes, press the CHANNEL key to view the corresponding video in full screen. The number of the CHANNEL keys corresponds to the number of cameras supported by the unit. • When in dome control mode, the key named “1” is used to access the Set/Go preset menu; the key named “2” is used to hide or display the dome
Resumo do conteúdo contido na página número 16
User’s Manual ESC Press to cancel or exit from certain mode or OSD menu without changing the settings made previously. ZOOM/ENTER • In OSD menu or selection interface, press the key to make the selection or save settings. • In live full screen view mode, press to view a 2 × zoom image; press it again to exit zoom mode. COPY In Playback mode, press COPY to select the start and end point of the video you want to export. More detailed information refer to Section 4.4 Vide
Resumo do conteúdo contido na página número 17
User’s Manual 3.2 Power Up / Down the Unit If you must shut down the MPEG-4 DVR for any reason, please use the proper shut down and power up procedures to avoid damaging your DVR unit. To Power Up the Unit Check the used type of power source before plug in your DVR first (the unit accepts the power input between AC100V to AC240V) The color bar and system checking information will be shown on the monitor and disappear when the unit has been completely powered up. To Restart / Sh
Resumo do conteúdo contido na página número 18
User’s Manual 3.3 Entering OSD Setup Menu The OSD Main menu contains a list of items that are used to configure the MPEG-4 DVR. To enter the Main menu, press MENU and then enter Administrator or User password. The Password Verification screen displays as follows. Password Verification ________ Press Channel Keys To Enter Password (4-8 Digits) Press ◄ Key To Delete The default passwords are shown in the following table. The same passwords are used for entering the remo
Resumo do conteúdo contido na página número 19
User’s Manual 3.4 System Date / Time Setting User can set the current date, time and other OSD parameters in Date/Time menu. The administrator’s privileges are required for entering the submenu. In OSD Main menu, select and press ENTER, then select to access the Date/Time menu; the menu displays as follows. Date/Time 1. Date 2005/02/21 2. Time PM10:39:26 3. Date/Time Display 1 Row 4. Date Display Mode Y/M/D 5. Time Display Mode 24 HR 6. Date/
Resumo do conteúdo contido na página número 20
User’s Manual Date Display Mode This function allows user to set the OSD display type of the date / time. There are three options to select from: , or . “Y” represents “Year”, “M” represents “Month” and “D” represents “Day”. Move to the item and press ENTER, the option starts blinking. Use UP / DOWN keys to change the setting. The default setting is in both NTSC / PAL formats. Time Display Mode User can choose to set the time format to <12 hou
