Resumo do conteúdo contido na página número 1
Calibur DSR-1000eZ
Calibur DSR-1000eZ
Single Channel Color Digital Video Recorder
User Manual
Resumo do conteúdo contido na página número 2
WARNING! To prevent fire and electric shock, do not expose this product to rain or moisture. ! The lightning flash with the arrowhead symbol, The exclamation point, within an equilateral within an equilateral triangle, is intended to alert triangle, is intended to alert the user to the the user to the presence of uninsulated presence of important operating and maintenance "dangerous voltage" within the products enclosure (servicing) instructions in the literature that maybe o
Resumo do conteúdo contido na página número 3
IMPORTANT INFORMATION Software and/or firmware is furnished to the purchaser under a license for use on a single system. Software and/or firmware included with this equipment are the sole proprietary property of, confidential to, and copyrighted by GE Interlogix, Corvallis, Oregon, USA. The software/firmware are not to be copied or disclosed in any manner without the express written consent of GE Interlogix. All information and specifications furnished by GE Interlog
Resumo do conteúdo contido na página número 4
Calibur DSR-1000eZ iv 0150-0238A
Resumo do conteúdo contido na página número 5
CONTENTS 1 FEATURES, CONNECTIONS, AND SETUP ................................................... 1-1 1.1 Product Description.........................................................................................1-1 1.2 Features............................................................................................................1-1 1.3 Unpacking ........................................................................................................1-1 1.4 Installation Environment ....
Resumo do conteúdo contido na página número 6
5.11 Advanced Menu ® Firmware Upgrade...........................................................5-9 6 RS-232 REMOTE PROTOCOL.................................................................. 6-1 7 FACTORY DEFAULTS............................................................................... 7-1 8 TECHNICAL SPECIFICATIONS ................................................................... 8-1 9 WARRANTY AND SERVICE........................................................................ 9-1
Resumo do conteúdo contido na página número 7
1 FEATURES, CONNECTIONS, AND SETUP 1.1 Product Description The DSR-1000eZ is a Digital Video Recorder designed to be a direct replacement for a Time Lapse VCR. Digital Video Recording allows the user to have continuous recording on a hard disk, without the need for replacing or rewinding of videotapes. The DSR-1000eZ provides menu based search capabilities for recorded events, as well as access to live or recorded data via the Ethernet (optional). 1.2 Features • Single channel Composite
Resumo do conteúdo contido na página número 8
1.4 Installation Environment Power: Ensure that the site's AC power is stable and within the rated voltage of the external power supply. If the site's AC power is likely to have spikes or power dips, use power line conditioning or an Uninterruptable Power Supply (UPS). Ventilation: Install the unit in a well-ventilated area. Take note of the locations of the cooling vents in the unit's enclosure, and ensure that they are not obstructed. Temperature: Observe the unit's ambient temperat
Resumo do conteúdo contido na página número 9
2. Reverse play button: Press this button to playback video in reverse at the normal record speed. 3. Stop button: Press this button to stop Recording or Playback. 4. Play Forward button: Press this button to playback video at the normal record speed. 5. Pause button: Press this button to pause playback. 6. Search button: Press this button to enter the Search Filters menu. 7. Increase and Decrease Record Speed buttons: Press these buttons to increase or decrease the Record or Playback spee
Resumo do conteúdo contido na página número 10
Video Out: Composite video output with BNC style connector. Ethernet Port (Ethernet models only) The cable connection configuration depends on your Wire Type: CAT5 network configuration: Connector Type: RJ-45 • For a DSR-1000eZ that connects directly to a Max Cable Length: 100 feet / 30.5 meters Hub, use a Straight Through connection. Minimum Cable Length: 6 feet / 1.8 meters • For a DSR-1000eZ that connects directly to a PC, use a Cross Over connection. Hub Wiring Configuration:
Resumo do conteúdo contido na página número 11
Resumo do conteúdo contido na página número 12
Alarm In An alarm condition can be activated by an Active Low TTL input Input: Active Low TTL w/ pull-ups or by relay contact devices such as pressure pads, passive or Normally Open Relay. High: 5V (12V tolerant) infrareds, door switches, or other similar devices. Low: Ground Minimum Duration: 0.5 Seconds Figure 1-4 Normally Open Relay Alarm Connection A larm Input Pin 1 Normally Open (Closes During Alarm) Pin 7 or 10 Ground Typical Alarm Device Accessories PCB Refer to each alarm de
Resumo do conteúdo contido na página número 13
VEXT Pulse Out The Video External Pulse connection (VEXT) simplifies Output: Active Low multiplexer operation by automatically synchronizing the High: 5V Low: Ground (0.8V Max) Multiplexer and the DSR-1000eZ. Current Out: 50mA Max The DSR-1000eZ sends a VEXT pulse to the Multiplexer Short Circuit Protected. indicating that it is ready to record the next image. The Multiplexer responds by sending the next image to the Video Input on the DSR-1000eZ. The VEXT connection is especia
Resumo do conteúdo contido na página número 14
o Main Menu ® Time/Date ® Set Time Format Time Format Setup To set the Time format, use the Jog to select the desired Time format. Format the time as either: Select Format • 12 HOUR 12 Hour • 24 HOUR Press the Enter button to confirm the selection and exit the menu. --OR— Press the Menu button to exit the menu without making changes. o Main Menu ® Time/Date ® Set Date Format Date Format Setup To set the Date format, use the Jog to select the desired Date format. Format the Date
Resumo do conteúdo contido na página número 15
o Main Menu ® Time/Date ® Set Date Date Setup To set the Date: 1. With MM DD YY DAY highlighted, press the Enter button. The MM DD YY DAY highlighting will move to the row of numbers. 12 17 00 SUN 2. Enter the date in Months, Days, Years. Day of the Week will [CANCEL] [OK] update automatically. Use the Jog to change the values. Use the Shuttle to navigate among the three fields. 3. Press the Enter button to confirm the selection. 4. To Save the changes and Exit the menu: Use t
Resumo do conteúdo contido na página número 16
Calibur DSR-1000eZ 1-10 0150-0238A
Resumo do conteúdo contido na página número 17
2 USER OPERATIONS 2.1 Recording To begin recording, press the Record button. RECORD will be indicated for RECORD three seconds, near the upper left hand corner of the primary monitor. The unit always starts recording at the end of the previously recorded data. Recording will continue until: • Another mode is selected (Play mode, Reverse Play,or Stop mode). Record button • The disk is full (In No Overwrite and Overwrite Once modes). See section 5.1 Advanced Menu ® Disk Overwrite Mod
Resumo do conteúdo contido na página número 18
Disk Nearly Full Notification Message This message will appear on the primary monitor to indicate that the unit has stopped recording, because Disk Full. Recording Has Stopped. the disk is full. [OK] In No Overwrite mode: The user must acknowledge the on-screen message by pressing the Enter button. Unit will not record over previously recorded data. To continue recording, the data must be erased (or deleted) in the Advanced ® Disk Maintenance menu. In Overwrite Once mode: The user
Resumo do conteúdo contido na página número 19
Fast Forward During playback, rotate the Shuttle clockwise to view the data at a Higher than REW FF normal rate. Increasing the amount of rotation increases the rate of playback. Fast Forward is indicated: • As FAST FORWARD near the upper left hand corner of the primary monitor, for three seconds. Jog / Shuttle Rewind During playback, rotate the Shuttle counter-clockwise to view the data (in REW FF reverse) at a Higher than normal rate. Increasing the amount of rotation increases th
Resumo do conteúdo contido na página número 20
Search Filters Use this to specify: Start Stop • The Start and Stop date of the search. DATE: 12/25/00 [ ] 01/01/01 [ ] (MM/DD/YY) (MM/DD/YY) • The Start and Stop time of the search. Start Stop • Which cameras to search TIME: 11:11:21 [ ] 12:34:34 [ ] exclusively. • To search for recorded 1 2 3 4 5 6 7 8 alarms. CAMERA: [ ][ ][ ][ ][ ][ ][ ][ ] ALARM: [ ] [CANCEL] [START SEARCH] Searching for All Recorded Events
