Resumo do conteúdo contido na página número 1
INSTRUCTION MANUAL
Mobile Digital Single Channel Recorder
EDSR100M
V1.0
About this manual
Before installing and using this unit, please read this Manual carefully.
Be sure to keep it handy for later reference.
Resumo do conteúdo contido na página número 2
Safety Warning WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This is a
Resumo do conteúdo contido na página número 3
Safety Precautions Safety Precautions ?Refer all work related to the installation of this product to qualified service personnel or system installers. ?Do not block the ventilation opening or slots on the cover. ? Do not drop metallic parts through slots.This could permanently damage the appliance. Turn the power off immediately and contact qualified service personnel for service. ?Do not attempt to disassemble the appliance.To prevent electric shock, do not remove screws or covers. There
Resumo do conteúdo contido na página número 4
Safety Precautions Safety Precautions The lightning flash with an arrowhead symbol, within an Warning: equilateral triangle, is intended to alert the user to the presence Electrostatic-sensitive device. Use proper of uninsulated ” dangerous voltage ” within the product’s enclosure CMOS/MOSFET handing precautions to avoid that may be of sufficient magnitude to constitute a risk of electric electrostatic discharge. shock to persons The exclamation point within an equilateral triangle is UNPACK
Resumo do conteúdo contido na página número 5
Important Safeguards Important Safeguards Read Instruction---All the safety and operating instructions should be read before the init is operated Retain Instructions---The safety and operating instructions should be retained for future reference. Heed Warnings— All warnings on the unit and in the operating instructions should be adhered to. Follow Instructions— All operating and use instructions should be followed Cleaning— Unplug the unit from the outlet before cleaning. Do not use liquid clean
Resumo do conteúdo contido na página número 6
Important Safeguards Important Safeguards and Warnings before Installation
Resumo do conteúdo contido na página número 7
Quick Install Guide Quick Install Guide : 1.Unpack Everything Make sure you have everything you need before you begin the installation. 2.Equipment Required The following tools may help you to complete the installation: •Drill •Screwdrivers •Wire cutters 3. Choosing the Location Choose a location for installation that: •Provide convenient access for installing or removing the hard drive •Allows air to flow around the fan vents. Inadequate or improper air flow can impede proper operation of the
Resumo do conteúdo contido na página número 8
Quick Install Guide Possible Installation Locations Inside the Automobile Vehicle: TOYOTA CAMRY Glove box (inside or underneath) Truck ( Suggest user “ suspend” for mounting option) Passenger seat (underneath) Drive seat ( between seat and wall) Show the wiring on the wiring harness that connects to the electrical system. Vehicle body + - Car body DVR On/Off switch - - Fuse(5A or 10A) Vehicle battery (+12V or +24V) Key start Spilt filter - Car engine + + +
Resumo do conteúdo contido na página número 9
Quick Install Guide Truck Possible Installation Locations Inside the Automobile Vehicle: Glove box (inside or underneath) Drive seat ( between seat and wall) or Passenger seat (underneath) ( Suggest user use “support” for mounting option) Show the wiring on the wiring harness that connects to the electrical system. Vehicle body + - Car body DVR On/Off switch - - Fuse(5A) Vehicle battery (+24V) Key start Spilt filter - Car engine + + +
Resumo do conteúdo contido na página número 10
Quick Install Guide Installing the Camera and Monitor The DVR is typically connected to one camera installed inside the car. For installation procedure, refer to the guide that came with the camera you purchased. The Monitor power supply connect from the Automotive adapter(cigarette plug) Monitor and cameras must be purchased separately. LCD Monitor LCD Monitor Connect the Camera Connect the power connector from the camera harness into the CAM ERA POWER OUT jack on the back panel of the DVR.
Resumo do conteúdo contido na página número 11
Quick Install Guide The DVR can be mounted horizontally (suspend or support mounted). Interface Support Suspend Interface Show all the possible ways to mount the DVR. Use the two Z-brackets supplied to mount it in any ways shown. Support Suspend
Resumo do conteúdo contido na página número 12
Quick Install Guide Installing the Hard Drive As following are the figure for the 3.5”and 2.5”HDD. Figure shows 3.5“ HDD Figure shows 2.5“ HDD
Resumo do conteúdo contido na página número 13
Table of Contents 1. Product Overview……… .… ...…………………………………………………………………………………… ..………… .. 1 1.1 Feature……… ...…… .…… .… .…………………………………… .………… ..…………………………………………… ..1 1.2 Specifications……… ....………………… .……………………………… ..………… .………… .………………………… ...2 2. Front & Rear Panels……… ...…… .……………………………………… ..………………………………………………… ....3 3. Back Panel Connections…… .……… ...…………………………………… ..………………………………………………… ..5 4. System Connection… ....……………………… ...………………………… ..…………… .…………………… .……………… ..8 4.1 One Camera Conne
Resumo do conteúdo contido na página número 14
Product Overview and Features 1. Product Overview The EDSR100M is the industry’s first full-featured digital video recorder designed specifically for use in mobile applications. Superior image quality and ease of use, combined with the ability to withstand high levels of vibration and humidity make the EDSR100M ideal for use in buses, cars, police cruisers, or any other application requiring a rugged digital recorder. Video and audio can be recorded at speeds up to 60/50 fps (NTSC/PAL), an
Resumo do conteúdo contido na página número 15
Specifications 1.2 Specifications Video Input 1 camera input (BNC),1Vp -p/75ohm Video Output 1 BNC video out (1Vp -p/75 ohm) for Main Monitor 1 video out (1Vp-p/75ohm)for looping Video Compression M-JPEG Recording Resolution 720x484 (NTSC); 720x576 (PAL) CompactFlash Memory Yes, Built-in CompactFlash card slot Alarm Input 1 alarm input Alarm Output 1 alarm output Video Display Full, PIP, Quad and 2x2 zoom for Live and Playback Video Loss Detection Yes Watch Dog Timer Yes Event Log Yes Har
Resumo do conteúdo contido na página número 16
Front Panel Keypads 2. Front Panel Keypads 1 3 4 6 7 8 19 17 18 2 5 20 EDSR100M 22 10 16 9 11 12 13 14 15 21 KEY 1 ~ 4 Left/Right Button: Press or to move the cursor to the left or right Up/Down Button: Press or to change the value. 5 ENTER: Press this key to confirm the selection or data changed. 6 BUZZER: Press this key to turn On/OFF the buzzer for all events. LOCK: Press and hold the LOCK button over 3 seconds to lock/unlock the function ke
Resumo do conteúdo contido na página número 17
16 Display: Press this key to switch ON/OFF. Record Record 002HR 002HR Disk:120 GB(0) Disk:120 GB(0) Disk size:120GB 2003/04/24 10:41:00 2003/04/24 10:41:00 Display Date/Time Display Date/Time, Display OFF And Operation status Operation Status, Disk Status. 17 HDD KEY: Protect HDD without steal 18 Hard Disk Tray: Hard Disk holder for HDD. 19 Jog and Shuttle Dial Shuttle : In Playback mode,turn the shuttle dial can fast forward/rewind the picture. In Pause mode, turn the shuttle dial can slow f
Resumo do conteúdo contido na página número 18
Back Panel Connections 3. Back Panel Connections 6 10 3 8 7 5 2 4 9 1 POWER Power in: The main power in. 1 AUDIO 2 Audio IN : Audio input for recording. Audio OUT : These two audio outputs can be set to “Enable” or “Disable” in Setup Menu. The operation of audio out is as follows: ( Internal circuit ) SW2 OFF / Mute SW1 Playback Audio A Audio OUT Audio IN Operation of SW2 : Operation of SW1 : When in recording or standby mode, When Playback Audio is enabled then the output the out of SW1
Resumo do conteúdo contido na página número 19
Back Panel Connections MONITOR 3 MUX MAIN MONITOR: Video input BNC connector, connected to multiplexer main monitor output. 4 MONITOR : Video output BNC connector connected to main monitor. ( Internal circuit ) SW3 MAIN MONITOR INTERNAL A MONITOR OUT VIDEO When the machine is in Menu, Search or Copy mode, the internal Video is switched to Monitor Out, so that the user can view full screen OSD. In other modes, the Video from multiplexer main monitor will be loop-through to the Monitor Out. VIDE
Resumo do conteúdo contido na página número 20
Back Panel Connections RS232 8 RS232 connector : Connect D-Sub 9 pins connector to RS232 ports for remote control RS485 9 RS485 connector : Cascade multi Digital Video Recorder. 10 FAN: Cooling FAN. 7
