Resumo do conteúdo contido na página número 1
LST1148-001B
BD-R2000
TM
HDD/BLU-RAY /DVD RECORDER
OWNER'S MANUAL
Resumo do conteúdo contido na página número 2
Safety Precaution Dear Customer, WARNING: TM Thank you for purchasing the TASCAM BLU-RAY DISC & HDD TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE recorder. Before use, please read the safety information and THIS UNIT TO RAIN OR MOISTURE. precautions to ensure safe use of your new unit. CAUTION: This unit should be used with AC 120VH, 60Hz only. To prevent electric shocks and fire hazards, DO NOT use any other power source. ATTENTION: CAUTION AVIS POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE L
Resumo do conteúdo contido na página número 3
Safety Precaution CAUTION: IMPORTANT SAFETY INSTRUCTIONS Changes or modifications not approved by TASCAM could void 1) Read these instructions. user’s authority to operate the equipment. 2) Keep these instructions. 3) Heed all warnings. This equipment has been tested and found to comply with the 4) Follow all instructions. limits for a Class B digital device, pursuant to Part 15 of the FCC 5) Do not use this apparatus near water. Rules. These limits are designed to provide reasonable 6) Clean o
Resumo do conteúdo contido na página número 4
Safety Precaution DISCLAIMER OF LIABILITY TASCAM shall not be liable for any loss relating to the unit’s failure to properly record, store or playback any content (video, audio or otherwise) for any reason whatsoever. Any applicable warranties shall only cover replacement or repair of the effected unit, and shall 0 Manufactured under license from Dolby Laboratories.Dolby and not apply to recovery or replacement of lost content. the double-D symbol are trademarks of Dolby Laboratories. Manuf
Resumo do conteúdo contido na página número 5
Contents Playing Videos on the HDD .............................................. 54 Contents Playing Videos on a SD Card ............................................ 54 Playing Still Images (JPEG) .............................................. 55 Changing Playback Settings ............................................. 56 Safety Precaution Playback Settings Menu.................................................... 56 Audio/subtitle settings .................................................... 56
Resumo do conteúdo contido na página número 6
Getting Started Key Features How to Read this Manual Professional Blu-ray Disc recorder of the About this manual high-definition era This manual mainly describes operation procedures using the remote control unit buttons. Copy videos to a Blu-ray Disc in high-definition from a high- definition camcorder, or down convert the videos and record • The buttons on the remote control unit are indicated as them onto DVDs, all without the need for a PC. [Button Name]. The internal hard disk drive enabl
Resumo do conteúdo contido na página número 7
Getting Started Disclaimer of compensation for loss or Other Precautionary Notes damage of stored video content Please note that our company will not be liable for Copyright protection compensation of the content or any incidental damages in the event that dubbing or playback cannot be performed properly This unit supports copyright protection technologies. for some reasons. The same applies during repair of this unit. Copyrights Handling precautions • According to the copyright law, video o
Resumo do conteúdo contido na página número 8
Getting Started Hard Disk Drive (HDD) SD Cards Hard disk drive (HDD) Precautions for handling SD and SDHC cards The HDD rotates at a high speed whenever the power is turned "On". Note: Pay particular attention to the following precautions when • The disc operation display icon appears blinking and using this unit. “READING” is displayed on the display window when the SD card is being accessed (such as during dubbing, Warning playback, or formatting). When access to the SD card is in • Do
Resumo do conteúdo contido na página número 9
Getting Started On-screen Displays Discs Status display BD recording formats Displays the current settings and operating status (such as o BDAV mode playback, pause) of this unit. • Videos can be edited (chapter edit etc) and new videos can Pressing the [ON SCREEN] button on the remote control be added to the disk. This format is suitable for recording displays the status. To cancel the display, press the [ON videos. SCREEN] button again. You can select whether to display the statuses
Resumo do conteúdo contido na página número 10
Getting Started Discs (Continued) Discs that enable both dubbing and playback Disc Type Recording Format Format Finalize Repeated Use (Reformat) BD-RE BDAV mode X - X BDMV mode - X X BD-R BDAV mode X X - BDMV mode - - X DVD-RW Video mode X X X VR mode X X X DVD-R Video mode - X - VR mode - X X Discs that enable playback only Disc Type Description DVD-RAM (4.7 GB) Supports specific forms of playback, but no recording can be done. BD-ROM Commercially available Blu-ray discs (movies, music, etc.)
Resumo do conteúdo contido na página número 11
Getting Started Disc storage Precautions on the Use of • Avoid storing the disc at the following locations. Discs • Places that are subject to high humidity, dust, or mold growth • Places that are exposed to direct sunlight or near a Maintenance of discs heater • Dirt attached to the disc, such as fingerprints and dust, may • Inside a car during summer cause distortion in the video image or sound. • Do not drop the disc or subject it to strong impact. Keep the disc clean at all times such
Resumo do conteúdo contido na página número 12
Getting Started Rack Mounting Notes Precautions for placement If this product is to be used without being rack-mounted, and use please affix the enclosed FOOT parts to the bottom face of the unit. Precautions When Mounting Rack Attaching the FOOT parts. • The guaranteed operating temperature range of this prod- • Carefully turn the unit upside down. uct is 5º - 35º C (41º- 95º F). • Removing the seal from each FOOT part exposes a self- • Do not install in the following types of places. Doing
Resumo do conteúdo contido na página número 13
Getting Started Name and Function of Parts Front panel A B C D EFGHIJKLM N O P Q R [ ] button A A N Playback control buttons Switches operation between on and standby. • [ I ] button B Disc tray Plays back the data. • [ ] button [ ] button o C M Stops playback/recording. Opens/closes the disc tray. • [ ] button O D Display window Fast reverses playback. Remote control sensor E • [ N ] button [RESET] switch F Fast forwards playback. Reset the unit. • [ W ] button G [REC MODE] button Paus
Resumo do conteúdo contido na página número 14
Getting Started Name and Function of Parts (Continued) Display window A B C D A HDD/DISC remaining level display English messages appear for a number of operations. (Examples) B Dubbing display HELLO : When the power plug is inserted C Disc status display READING : When reading the disc D HDMI output display ONSCREEN : Upon moving to the playback navigation Memo: screen • The brightness of the display window can be adjusted. For more details, refer to “PANEL DISPLAY BRIGHTNESS” (A page 75).
Resumo do conteúdo contido na página número 15
Getting Started I [ J / K / H / I ] Remote control The cursor can be moved to select an item. J [OPTION] Displays the option screen. A K [ S ] T Move to the chapter just before the current chapter. B U C [ ] L O V Fast reverses the video and starts slow playback. M [ R ] W Press the [ ] and [ ] buttons together to start recording. R I D N [REC MODE] X For checking the recording mode settings and amount of time remaining. E Y O [ON SCREEN] Z Displays information on the screen. F a [PROGRESSI
Resumo do conteúdo contido na página número 16
Getting Started Remote control codes Name and Function of By setting a remote control code for the unit and remote Parts (Continued) control, you can prevent two recorders from operating simultaneously using the remote control for this unit. g [ N ] (the setting for the unit and remote control at time of purchase Fast forwards the video and starts slow playback. is “REMOTE CONTROL 3”.) h [ I ] Memo: Plays the video. • Changing the remote control code for the remote control [ ] i W befor
Resumo do conteúdo contido na página número 17
Preparation Memo: Connecting a Monitor • After connecting a component video cable, change the unit setting to “COMPONENT OUTPUT”. To display video images from this unit, connect it to a monitor. For more details, refer to “COMPONENT OUTPUT” (A page • This unit supports connections using "HDMI cable", 81) . "component video cable", "S-video cable", or "video cable". Memo: Connecting using an S-video cable • Switch to the appropriate monitor input according to the type of connection cable used
Resumo do conteúdo contido na página número 18
Preparation Connecting a Video Deck Connecting an Amplifier or Other Equipment Connecting an audio amplifier Connecting a video camera o Connecting using an optical digital cable o Connecting via the i.LINK terminal HDD REC BV REC SD REC INPUT MIDIA SELECT ONE TOUCH MODE SELECT HDD BD/SD DUBBING HDV/DV IN Memo: • Remove the protection cap of the cable before connecting. o Connecting via the USB terminal Store the protection cap properly to prevent it from being misplaced. o Connecting usi
Resumo do conteúdo contido na página número 19
Preparation Connecting External Connecting the Power Devices Supply Connect the supplied power cable to this unit as follows. Connecting a wired remote control 1 Connect the supplied power cable to the AC IN Using a wired connection enables stable control of this unit terminal of this unit from an external device. Operation is possible using any code (1 to 4) regardless of 2 Connect the other end of the power cable to a the remote control code settings of this unit. power point Memo: 3 Pr
Resumo do conteúdo contido na página número 20
Preparation 4 Select “CLOCK SET”, and press the [OK] button Setting and Displaying • The Clock Set menu screen appears. Date/Time Set the date/time of the built-in clock as follows. The recording date/time is stored on the disc. Setting the date/time Set the date/time of the built-in clock as follows. 1 Press the [SET UP] button on the remote control unit • The Settings menu screen appears. 5 Set the time and date • Repeat the steps below to specify the time and date. A Pres
