Manual do usuário Havis-Shields 1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28

Resumo do conteúdo contido na página número 1

3

INSTALL INSTRUCTIONS C-TCB-28
1997-2007 DODGE DAKOTA
TELESCOPING COMPUTER BASE


TOOLS REQUIRED:
Ratcheting wrench Combination wrench set
3/8” Metric Socket Set Powered Drill
T-20 torx bit Drill Bit set
3/8” Standard Socket Set


HARDWARE:
QTY DESCRIPTION PART #
4 ¼” x 1” Hex head lag bolt GSM33060
1 5/16” Flat Washer GSM31006
1 5/16” Nylock Nut GSM30017
1 “Z” Bracket Support CM002001
1 ¼” x ¾” Carriage Bolt GSM32000
1 ¼” Serrated Nut GSM30023
1 Pole Support Assembly CM9

Resumo do conteúdo contido na página número 2

CM93072-3 CM93146 CM93071-28W Location of factory seat bolts Remove front bolts on passenger- Install “Z” support bracket to base side seat and position base assembly assembly using ¼ x ¾” carriage bolt in front of seat mount brackets. and serrated nut. Re-attach front bolts on passenger- side seat through C-TCB base plate. Tighten “Z” bracket to base Pre-drill floor of vehicle with 3/16” Attach bracket to floor using ¼” x assembly. drill bit Use holes in the “Z” bracket 1” hex

Resumo do conteúdo contido na página número 3

Loosely attach lateral support brace Pre-drill floor of vehicle with 3/16” Attach support brace to floor using to TCB base using 5/16” flat washer drill bit. Use holes in the support ¼” x 1” hex head lag bolts and 5/16” nylock nut brace as a drill template Tighten 5/16” nylock nut Insert inner telescoping pole assembly and thread lock handle into pole support base assembly. Final Installation Install C-3090-x laptop platform (sold separately) C-TCB-28-INST-6-07 3