Resumo do conteúdo contido na página número 1
Instruction Manual
DVD-R100
www.samsungusa.com
Resumo do conteúdo contido na página número 2
HEADQUARTERS 105 Challenger Road, Ridgefield Park, N.J.07660-0511 TEL: 1-800-SAMSUNG SERVICE DIVISION 400 Valley Road, Suite 201 Mount Arlington, NJ 07856 1-800-SAMSUNG (1-800-726-7864) www.samsungusa.com US AK68-00427A-01
Resumo do conteúdo contido na página número 3
Getting Started Part 15 of the FCC Rules. These limits are designed to Exterior interference such as lightning and static elec- provide reasonable protection against harmful interfer- tricity can affect normal operation of this recorder. If Warning Precaution ence in a residential installation. This equipment gener- this occurs, turn the recorder off and on again with ates, uses and can radiate radio frequency energy and, if the POWER button, or disconnect and then reconnect not installed and
Resumo do conteúdo contido na página número 4
Getting Started Do not apply labels or stickers to discs. (Do not use DVD-RW (VR mode) This DVD Recorder can JPEG CD-R/RW discs fixed with exposed tape adhesive or leftover - This is a format that is used for recording data on a allow you to protect the peeled-off stickers.) DVD-RAM or DVD-RW disc. You can repeat record- contents of your discs, Do not use scratch-proof protectors or covers. ing, editing, deleting, partial deletion, creation of as described below. Only JPEG files with th
Resumo do conteúdo contido na página número 5
Getting Started Method 4 : Connecting to Component video input Reviewing Images Being Recorded (Time Slip)......35 Language Setting.......................................................61 Contents jacks(Y,Pb,Pr) in 480p mode ...................................18 Making a One Touch Recording (OTR) ..................36 Audio Setting ............................................................62 Step 4 : Connecting the Audio cable.......................18 Setting a Timer Recording ...............
Resumo do conteúdo contido na página número 6
Getting Started High quality progressive scan General Features Before reading the user’s man- How to use the DVD recorder Progressive scanning provides high resolution and flick- er free images. ual The 10-bit 54-MHz DAC and 2D Y/C Separating Circuitry provides the highest image playback and recording quality. (See page 18.) The DVD-R100 allows you to record and play high qual- Make sure to check the following matters before reading ity digital images on DVD-RAM/DVD-RW/DVD-R discs. the user’s m
Resumo do conteúdo contido na página número 7
Getting Started Step 3 Recording Step 6 Finalizing & Playing on other DVD components Description There are two different recording methods, Direct To play your DVD on other DVD components, finalizing Recording and Timer Recording. Timer recording is classi- may be necessary. First, finish all editing and recording fied as recording type : Once, Daily or Weekly or record- operations, then finalize the disc. ing mode : XP (high quality mode), SP (standard quality When using a DVD-RW disc in VR Mod
Resumo do conteúdo contido na página número 8
Getting Started 10. MENU Button Rear Panel Tour of the Remote Control Brings up the DVD recorder’s setup menu. 11. ENTER/DIRECTION Buttons 1 2 3 4 5 6 7 (UP/DOWN or LEFT/RIGHT Buttons) This button functions as a toggle switch. 1 18 12. RETURN Button Returns to a previous menu. 2 13. REPEAT Button Allows you to repeat a title, chapter, track or disc. 14. INFO. Button 3 19 This will display current settings or disc status. 4 20 5 15. REC MODE Button 21 This will display the recording status. 16. R
Resumo do conteúdo contido na página número 9
Connecting & Setting UP Method 1 : Antenna + DVD Quick Overview Step 1: Unpacking Recorder + TV : No Cable box You can record non-scrambled channels by selecting the channel on the DVD Recorder. Also use this Method if you watch channels without cable box. Connecting & A Quick Overview presented in this guide will give you Accessory enough imformation to start using the recorder. Check for the supplied accessories below. Video/Audio Cable (AC39-42001R) Setting Up RF Cable for TV (AC39-42001J
Resumo do conteúdo contido na página número 10
Connecting & Setting UP scan video output jack is used in progressive output Method 3 : Antenna + DVD Method 2 : Connecting to an S- Method 3 : Connecting to mode. This is only available with TVs that support Recorder + Cable box +TV : Cable video input jack Component video input progressive scan. Progressive Scan Output (525p) box with a few scrambled channels jacks(Y,Pb,Pr) in 480i mode Connect an S-video cable(not supplied) between the S- “Consumers should note that not all high definition
Resumo do conteúdo contido na página número 11
Connecting & Setting UP Method 4 : Connecting to Method 2 : Connecting to a stereo Method 3: Connecting to an AV Step 4 : Connecting the Audio Component video input amplifier with analog input jacks amplifier with a digital input jack cable jacks(Y,Pb,Pr) in 480p mode If your stereo amplifier only has audio input jacks(L and If your AV amplifier only has a Dolby Digital or DTS R), use the analog audio out jacks. decoder and a digital input jack, use this connection. Your TV must support progr
Resumo do conteúdo contido na página número 12
Connecting & Setting UP Method 2 : Connecting a Step 5 : Connecting external Step 6 : Connecting the Power Step 7 : Preparing the Remote Camcorder to the LINE 2 jacks devices Cord Control You can also use the LINE 2 IN jacks on the front panel of the DVD Recorder. You can record from connected equipment. When an input source is inserted into LINE 2 while viewing TV, the input will be switched to LINE 2 auto- This allows you to connect your DVD Recorder to other After all connections are complete
Resumo do conteúdo contido na página número 13
Connecting & Setting UP Controlling TVs with the Remote Control Press a Number button to select the lan- BRAND BUTTON 1. Press and hold the TV POWER button. 2 guage. Step 8 : Initial Setup SELECO TV POWER +74 2. Enter a 2-digit code by using the numerical buttons SHARP TV POWER +36,+37,+38,+39,+48 on the remote control. SIMENS TV POWER +71 See “Controllable TV Codes” SINGER TV POWER +57 If the code works, your TV set will be turned on or off. SINUDYNE TV POWER +57 If it does not respond, try oth
Resumo do conteúdo contido na página número 14
Connecting & Setting UP Daylight Saving Select System using the …† buttons, then Use the †…œ √ buttons to select the If your clock is set to the wrong time zone or select the Yes, No or Automatic using the …† buttons 3 press the √ or ENTER button. 6 Current Date and Current Time, and then daylight saving, you can adjust these settings then press the √ or ENTER button. System menu will be displayed. press the ENTER button. Select Automatic to set the daylight saving without tuning off the Au
Resumo do conteúdo contido na página número 15
Connecting & Setting UP Select Signal Source(Antenna/Cable TV) Press the √ or ENTER button. 3. Channel Set Manual Channel Set 5 using the …† buttons, then press the √ or 4 Channel Set will be displayed. ENTER button. Auto Channel Memory Channel Set No Disc Manual Channel Set can be used after you have first selected Auto Channel Memory. Antenna/Cable TV :Cable TV √ √ Select the item that matches the antenna connection You can set the Antenna/Cable TV settings automatical- Auto Channel Memory √
Resumo do conteúdo contido na página número 16
Connecting & Setting UP Select the sub menu(Digital Output or DTS) Use the …† buttons to select the desired 4. Setting Up the Audio Options 5. Setting Up the TV Aspect 4 using the …† buttons, then press the √ or 5 item(4:3 LetterBox, 4:3 Pan-Scan or 16:9 Allows you to setup the audio device and sound status This allows you to set up the TV screen settings. ENTER button. Wide). Then press the √ or ENTER button. settings depending on the audio system in use. Select the item that matches the au
Resumo do conteúdo contido na página número 17
Recording Recording Formats Recording Mode Before Recording When you insert an unused disc, the following message Select one of four recording modes by pressing the REC appears; Since available functions differ depending on MODE button repeatedly while the unit is in Stop mode the disc type, select a disc that best fits your preferences. for the desired recording time and picture quality. DVD-RAM: Use after formatting the disc. In general, picture quality improves as the recording time decrease
Resumo do conteúdo contido na página número 18
Recording To pause recording Press the CH ( / ) or number ( ~ ) About INFO. Key 3 buttons to select the current program you Recording the current TV pro- Press the REC PAUSE button to pause a recording in want to record. progress. gram you are watching Press the REC PAUSE button again to resume record- ing. Press the REC MODE button repeatedly, (or You can switch channels by pressing the CH ( / ) 4 Press the REC MODE button and then press buttons while recording pauses. the …† button) to se
Resumo do conteúdo contido na página número 19
Recording Press the REC button. When the INFO. button is pressed again: 5 Recording from external equip- Reviewing Images Being Information about playback will appear. Recorded (Time Slip) ment you are watching DVD-RAM(VR) Playing Info Name APR/04/2004 12:00 AM To pause recording CH7 Title 15/15 Press the REC PAUSE button to pause a recording in Created Time APR/04/2004 12:00 AM progress. Playing Time 00:02:05 Title Protection Not Protected Press the REC PAUSE button again to resume record-
Resumo do conteúdo contido na página número 20
Recording To view the current status of the disc and progress of Source: The video input source (L1, L2 or DV), or recording : Press the INFO. button, and the information the broadcasting channel you want to set a Making a One Touch Recording Setting a Timer Recording about the disc will appear. timer recording. When selecting channels to be recorded, the (OTR) …† buttons on the remote control can let DVD-RAM(VR) Disc Info Disc Name you select only the channels that have been memorized d
