Resumo do conteúdo contido na página número 1
DR-3
UNIFIED LEARNING
REMOTE CONTROL
INSTRUCTION
MANUAL
Resumo do conteúdo contido na página número 2
INTRODUCTION Table of Contents The Polk Audio DR-3 Unified Learning Remote was designed to operate the Polk Audio Digital Solution home theater system and Polk Audio DP-1 DR-3 Remote Guided Tour ..................................................3 - 5 CD/DVD player. It can also be programmed to operate most DVD and CD players, TVs, Cable and DSS tuners as well as VCRs. By following the easy Button Function Chart ..............................................................6 steps in this manual
Resumo do conteúdo contido na página número 3
DR-3 REMOTE GUIDED TOUR See the chart on page 6 for the functions of each button with various device types. 1. Source/Device Area – These buttons serve two functions: to select the device that the remote will control and to change inputs on the Digital Solution preamp/processor. For example if you want to play the DVD player, push the “DVD” button on the top row. The Digital Solution preamp/processor will switch to the DVD input (if it is on) and the buttons on the DR-3 remote will be set to o
Resumo do conteúdo contido na página número 4
^ ^ ^ 8. MENU – This button acts as a chapter skip button to skip forward through DVD chapters or CD tracks. With TVs and other video devices it calls up the device menu. 9. PAUSE – This button acts as the pause/step frame button for the DP-1 CD/DVD player, VCRs, CD players and TIVO-type video storage devices. To return to normal play, press the PLAY button. With DSS and cable tuner boxes and the Multi-room function of the Digital Solution system, it acts as the up arrow navigation button fo
Resumo do conteúdo contido na página número 5
20.TUNE-/SUB TTL – Use to manually tune the radio on the Digital Solution system. Acts as the Subtitle toggle switch on DVD play- ers. For the function on other devices see the chart on page 6. 21.SELECT – This button selects a choice on a menu such as the set up menu of a DVD player or the title menu of a DVD disc. With DSS and cable boxes it acts to call up “Favorites.” It has no function with the Digital Solution preamp/processor. 22.AUDIO – This button toggles through the available audi
Resumo do conteúdo contido na página número 6
DR-3 FUNCTION LIST Button Name FM/AM DVD/6CH DSS CBL/CBL DIG AUX/TAPE CD MULTI VCR Polk DVD Others CBL TV TAPE/AUX (Toggle) DVD/6CH (Toggle) DSS/DSS DIG (Toggle) CBL/CBL DIG (Toggle) FM/AM (Toggle) CD MULTI VCR LIGHT LIGHT LIGHT LIGHT LIGHT LIGHT LIGHT LIGHT LIGHT LIGHT LIGHT MUTE MUTE MUTE MUTE MUTE MUTE MUTE MUTE MUTE MUTE MUTE SURROUND MODE MODE MODE MODE MODE MODE MODE MODE MODE MODE MODE VOL UP VOL UP VOL UP VOL UP VOL UP VOL UP VOL UP VOL UP VOL UP VOL UP VOL UP VOL DN VOL DN VOL DN VOL DN
Resumo do conteúdo contido na página número 7
PROGRAMMING THE REMOTE Manual Three-Digit Code Method The DR-3 remote control can duplicate the remote functions of most brands of audio/video equipment by simply entering in a three-digit code number. When you enter in the code the DR-3 “learns” most or all of the remote functions of that equipment so you don’t need to program the DR-3 button by button. There are tables on pages 14 - 15 that list the major audio/video brands and their three-digit remote codes. Quick Instructions 4 1. Look up co
Resumo do conteúdo contido na página número 8
PROGRAMMING THE REMOTE Auto Search Method If none of the three-digit code numbers assigned to your brand shut off your equipment or if your brand of equipment is not listed in the code tables, you can use the Auto Search Method to find the correct three- digit number for your equipment. 1. Turn on the equipment you wish to program. 3 3 NOTE: From here on in you have 20 seconds to perform each step. If the Source/Device button light goes off, you need to back up a step and do it again. You can ex
Resumo do conteúdo contido na página número 9
PROGRAMMING THE REMOTE Teaching Method From time to time the three-digit programming method doesn’t automatically program in all of the commands of the original remote. In such cases you can “teach” the DR-3 individual commands from your original equipment remote control. New commands can be taught to any button except the eight Source/Device buttons at the top of the remote and the LIGHT, MACRO, LEARN, CODE, SAVE, CNCL, MUTE, SURROUND MODE, VOL UP, VOL DOWN, SUB+, SUB– and SYSTEM POWER butto
Resumo do conteúdo contido na página número 10
PROGRAMMING THE REMOTE Erasing a Learned Command From a Button NOTE: You have 20 seconds to perform each step. If the source button light goes off, you need to back up a step and do it again. You can exit by pressing the CNCL (cancel) button at any time in the process. 1. Press and hold the LEARN button for two seconds. The status light at the top left of the remote will glow orange. 2 2. Press the Source/Device associated with the button you wish to erase. The Source/Device button light will
Resumo do conteúdo contido na página número 11
PROGRAMMING THE REMOTE Erasing All the Learned Commands in All Device Modes This procedure will erase all the learned commands on all the buttons in all eight Source/Device modes. Be really, really sure you want to do this before following the steps below. 1. Press and hold the LEARN button for two seconds. The Status light at the top left of the remote will glow orange. 2. Press and hold the LEARN button again for 10 seconds. The Status light will flash red continuously. The status light wil
Resumo do conteúdo contido na página número 12
MACRO OPERATION Programming the Macro Button The MACRO button can send out a sequence of up to 20 commands with one button press. It can be programmed for up to eight Source button macros and perform multi-step operations with just one button push. For example, you can program the MACRO button to turn on the TV, turn on the DS system, turn on the DVD player, select the correct Video input, and open DVD drawer with the push of one just button. 2 Each Source/Device button can have an associated M
Resumo do conteúdo contido na página número 13
MACRO OPERATION Macro Sequence Programming Example: Confused? Don’t worry, it isn’t as bad as it looks. Let’s walk you through a hypothetical Macro sequence to show you how it works. In this example, we are programming the DVD source Macro button to turn on the TV, the Digital Solution system and the DVD player as well as select the DVD player as the source to view. In this case, we are assuming that you have programmed the TV codes into the 2,7 4 CBL Source/Device. 1. Press and hold the C
Resumo do conteúdo contido na página número 14
SETUP CODES Manufacturer/Brand Set-Up Code Number Manufacturer/Brand Set-Up Code Number Tape/Aux Cable (TV) PHILIPS TIVO 001 SPECTRICON 112 SONY TIVO 002 SSS 004 043 SYLVANIA 001 003 059 060 063 064 DVD Player 164 160 127 GOLDSTAR 057 074 091 SYMPHONICS 052 HARMAN KARDON 084 TANDY 081 HITACHI 101 TATUNG 056 062 JVC 012 TECHNICS 034 080 LG 057 074 091 TECHWOOD 004 MAGNAVOX 066 096 TEKNIKA 003 004 024 028 043 MARANTZ 083 095 072 101 143 MITSUBISHI 017 TELERENT 072 MYRYAD
Resumo do conteúdo contido na página número 15
SETUP CODES Manufacturer/Brand Set-Up Code Number Manufacturer/Brand Set-Up Code Number VCR VCR AIWA 034 161 OPTONICA 053 054 AKAI 043 046 124 142 146 PANASONIC 031 070 133 140 AMPRO 072 PENTAX 004 020 031 063 ANAM 031 103 PHILCO 031 034 067 AUDIO DYNAMICS 012 023 043 PHILIPS 031 067 034 054 101 BROKSONIC 035 037 129 PILOT 101 CANON 028 031 PIONEER 004 021 048 CAPEHART 108 PORTLAND 108 CRAIG 001 040 135 PULSAR 072 CUIRTIS MATHES 031 041 QUARTZ 014 DAEWOO 117 005 11
Resumo do conteúdo contido na página número 16
5601 METRO DRIVE, BALTIMORE, MARYLAND 21215, USA, 410-764-5275, FAX: 410-764-5266 RM2070-1 www.polkaudio.com
