Manual do usuário Philips MCD906/93

Resumo do conteúdo contido na página número 1

2
User Manual
1
Quick Start Guide
MCD 906
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
3
1
2
Remote control with two
Composite Video Cable
AAA batteries
Quick start guide
FM antenna
User manual
MCD906 QSG_Eng-93 1 2010.3.31, 11:04

Resumo do conteúdo contido na página número 2

1 Connect the speaker cables. 2 Connect the FM antenna. Tips – See the User Manual for other TV 4 connection options. Connect the composite video cable to a TV. –For connecting to a Progressive Scan TV, refer to the user manual for proper 5 connections and detailed setup. Connect the power cords of the system and TV. Speaker Speaker (right) (left) 1 2 3 4 FM antenna AC power Setting up the TV 1 Press SOURCE (DISC on the remote control) to select disc source. 2 Turn on the TV and set it to the co

Resumo do conteúdo contido na página número 3

Setting the clock 1 In standby mode, press and hold CLOCK on the remote control. 2 When the hour digits flash, turn VOLUME-/+ on the system or press VOL +/- on the remote control to set the hours. 3 Press CLOCK again and the minute digits flash. Then turn VOLUME-/+ on the system or press VOL+/- on the remote control to set the minutes. 4 Press CLOCK again to confirm the time setting. Setting DVD menu options IMPORTANT! If the progressive scan feature is activated but the connected TV does not su

Resumo do conteúdo contido na página número 4

Playing a disc 1 Press ç to open the disc tray and load in a disc, then press the same button again to close the disc tray. ➜ Make sure the label side of the disc is facing up. 2 Playback will start automatically. If not pressÉÅ. 3 To stop playback, press 9. Programming and tuning to radio stations 1 Press SOURCE (TUNER on the remote control) to select tuner source. 2 Press PROGRAM on the remote control for more than two seconds to program all available stations in order of waveband. 3 Press ¡ /