Manual do usuário Philips MCD772/93

Resumo do conteúdo contido na página número 1

2
User Manual
1
Quick Start Guide
MCD772
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
Remote control with two
Composite Video Cable
Control Cable
AAA batteries
(yellow)
FM antenna
Quick start guide User manual
MCD772 QUG_93_Eng 1 2010.3.31, 11:03

Resumo do conteúdo contido na página número 2

1 Connect the speaker cables. 2 Connect the FM antenna. Tips – See the User Manual for other TV 3 connection options. Connect the control cable. –For connecting to a Progressive Scan TV, refer to the user manual for proper 4 connections and detailed setup. Connect the composite video cable to a TV. 5 Connect the power cords of the system and TV. 5 AC power FM antenna 4 AC power 2 Speaker Speaker (left) (right) 3 5 1 Setting up the TV 1 Turn the SOURCE knob (or press DISC on the remote control) t

Resumo do conteúdo contido na página número 3

Setting the clock 1 In standby mode, press and hold CLOCK on the remote. 2 When the hour digits flash, turn VOLUME on the system or press VOL +/- on the remote to set the hours. 3 Press CLOCK again and the minute digits flash. Then turn VOLUME on the system or press VOL +/- on the remote to set the minutes. 4 Press CLOCK again to confirm the time setting. Setting DVD menu options IMPORTANT! If the progressive scan feature is activated but the connected TV does not support progressive signals or

Resumo do conteúdo contido na página número 4

Playing a disc 1 Press ç to open the disc tray and load in a disc, then press the same button again to close the disc tray. ➜ Make sure the label side of the disc is facing up. 2 Playback will start automatically. If not pressÉÅ. 3 To stop playback, press 9. Programming and tuning to radio stations 1 Turn the SOURCE knob (or press TUNER on the remote control) to select tuner source. 2 Press PROGRAM on the remote control for more than two seconds to program all available stations in order of wave