Manual do usuário Philips MCD289/79

Resumo do conteúdo contido na página número 1

2
User Manual
1
Quick Start Guide
MCD 289
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
STANDBY-ON
SLOW
ANGLE
DISPLAY
Remote control with two AAA
A/V cord (R/W/Y)
Stand
MUTE
batteries
FM wire antenna Quick start guide
User manual
Power adapter
AC power cord
(for main set)
(for subwoofer)
MCD289 QUG_Eng-98 1 2008.3.19, 16:16

Resumo do conteúdo contido na página número 2

1 Connect the speaker cables. 2 Tips Connect the FM antenna. – See the User Manual for other TV connection options. 3 –For connecting to a Progressive Scan Connect the A/V cord to a TV. TV, refer to the user manual for proper connections and detailed setup. 4 – In case of wireless connection failure Connect the power cords of the system and TV. between the main set and subwoofer, see the User Manual for manual pairing (“Installation - Step 1: Connecting 5 speakers - Connecting the wireless Power

Resumo do conteúdo contido na página número 3

Setting the clock 1 In standby mode, press and hold CLOCK on the remote control. 2 When the hour digits flash, press VOLUME-/+ (VOL+/- on the remote control) to set the hours. 3 Press CLOCK again and the minute digits flash. Then press VOLUME-/+ (VOL+/- on the remote) to set the minutes. 4 Press CLOCK again to confirm the time setting. Setting DVD menu options IMPORTANT! If the progressive scan feature is activated but the connected TV does not support progressive signals or the cables are not c

Resumo do conteúdo contido na página número 4

P r i n t Playing a disc 1 Insert a disc into the slot loader. ➜ Make sure the label side is facing you. ➜ Make sure you have removed any other disc from the slot loader. 2 Playback will start automatically. If not pressÉÅ. 3 To stop playback, press 9. Programming and tuning to radio stations 1 Press SOURCE (TUNER on the remote control) to select tuner source. 2 Press PROGRAM for more than two seconds to program all available stations in order of waveband. 3 Press PRESET ¡ / ™ until the desired