Manual do usuário Philips MCD288/55

Resumo do conteúdo contido na página número 1

2
User Manual
1
Quick Start Guide
MCD 288
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
15-pin D-Sub cable (with one
Remote control with two AAA
A/V cord (R/W/Y)
end fixed on the main set)
batteries
External video box FM wire antenna Quick start guide
AC power cord Stand User manual
MCD288 QUG_Eng-55 1 2007.7.18, 15:42

Resumo do conteúdo contido na página número 2

1 Connect the speaker (subwoofer) cables. Tips – See the User Manual for other TV connection options. 2 Connect the FM antenna. –For connecting to a Progressive Scan TV, refer to the user manual for proper connections and detailed setup. 3 –Never connect the AC power cord Connect the A/V cord to a TV. before connection of the 15-pin Sub cable to avoid causing any damage to the set. 4 Connect the power cords of the system and TV. AC power R 4 4 AC power 1 3 Speaker Speaker (left) (right) 2 1 1 FM

Resumo do conteúdo contido na página número 3

Setting the clock 1 In standby mode, press and hold CLOCK on the remote. 2 When the hour digits flash, press VOLUME-/+ (VOL+/- on the remote) to set the hours. 3 Press CLOCK again and the minute digits flash. Then press VOLUME-/+ (VOL+/- on the remote) to set the minutes. 4 Press CLOCK again to confirm the time setting. Setting DVD menu options IMPORTANT! If the progressive scan feature is activated but the connected TV does not support progressive signals or the cables are not connected accordi

Resumo do conteúdo contido na página número 4

P r i n t Playing a disc 1 Insert a disc into the slot loader. ➜ Make sure the label side is facing you. ➜ Make sure you have removed any other disc from the slot loader. 2 Playback will start automatically. If not pressÉÅ. 3 To stop playback, press 9. Programming and tuning to radio stations 1 Press SOURCE (TUNER on the remote) to select tuner source. 2 Press PROGRAM for more than two seconds to program all available stations in order of waveband. 3 Press PRESET ¡ / ™ until the desired preset s