Resumo do conteúdo contido na página número 1
1
MODEL G0703 1 ⁄2 HP
CYCLONE DUST COLLECTOR
OWNER'S Ma NUa L
Copyright © AU g USt , 2009 By g rizzly ind UStri Al, in C. r EViSEd no VEMBEr , 2009 (tr )
Wa RNiNG: NO PORTiON Of THiS Ma NUa L MaY bE REPRODUCED iN a NY SHa PE
OR fORM WiTHOUT THE WRiTTEN a PPROva L Of G Rizz LY iNDUSTRia L, iNC.
(For Mod El S MAn UFACt Ur Ed S in CE 8/09) #tr Cr Blt SJB11940 print Ed in t AiWAn
Resumo do conteúdo contido na página número 2
This manual provides critical safety instructions on the proper setup, operation, maintenance and service of this machine/equipment. Failure to read, understand and follow the instructions given in this manual may result in serious personal injury, including amputation, electrocution or death. The owner of this machine/equipment is solely responsible for its safe use. This responsibility includes but is not limited to proper installation in a safe environment, personnel training and usage
Resumo do conteúdo contido na página número 3
Table of Contents iNTRODUCTiON ............................................................................................................................... 4 Manual Accuracy ........................................................................................................................ 4 Contact info ................................................................................................................................ 4 Machine description ....................................
Resumo do conteúdo contido na página número 4
iNTRODUCTiON Manual a ccuracy Contact info We are proud to offer this manual with your new We stand behind our machines. If you have any machine! We've made every effort to be exact service questions, parts requests or general ques- with the instructions, specifications, drawings, and tions about the machine, please call or write us at photographs of the machine we used when writ- the location listed below. ing this manual. However, sometimes errors do happen and we apologize for them. Grizzl
Resumo do conteúdo contido na página número 5
identification Filter Brush handle Motor Blower housing inlet restrictor inlet Note: The inlet restrictor is only installed if dust remote Magnetic Switch collector is to be used on a Canister Filter 20 Amp-110 Volt circuit and circuit breaker tripping occurs during start-up. Collection Bag Cyclone Funnel Stand Collection drum drum Caster ground Wire figure 1. identification. To reduce the risk of serious injury when using this machine, read and understand this entire manual before
Resumo do conteúdo contido na página número 6
Machine Data Sheet mACHI A d A t sH e Customer Service #: (570) 546-9663 • To Order Call: (800) 523-4777 • Fax #: (800) 438-5901 model G0703 1-1/2 HP CyClone dust ColleCtor Product Dimensions: Weight ...........................................................................................................................................................................177 lbs. 1 1 1 Length/Width/Height ............................................................................................
Resumo do conteúdo contido na página número 7
Bag Information Number of Lower Bags ...................................................................................................................................................1 Lower Bag Capacity .........................................................................................................................................2.66 cu. ft. 3 Lower Bag Diameter ............................................................................................................................
Resumo do conteúdo contido na página número 8
SECTION 1: SAFETY For Your Own Safety, Read Instruction Manual Before Operating this Machine The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures. Indicat
Resumo do conteúdo contido na página número 9
Safety Instructions for Machinery 7. ONLY ALLOW TRAINED AND PROP- 16. REMOVE CHUCK KEYS OR ADJUSTING ERLY SUPERVISED PERSONNEL TO TOOLS. Make a habit of never leaving OPERATE MACHINERY. Make sure chuck keys or other adjustment tools in/on operation instructions are safe and clearly the machine—especially near spindles! understood. 17. DAMAGED MACHINERY. Check for bind- 8. KEEP CHILDREN/VISITORS AWAY. ing or misaligned parts, broken parts, Keep all children and visitors away from loose b
Resumo do conteúdo contido na página número 10
a dditional Safety instructions for Dust Collectors 1. MaCHiNE USE. this machine is intended 5. avOiDiNG fiRES. do not allow steel parti- to only collect wood dust and chips from cles to strike the impeller—this may produce woodworking machines. do not use this a spark, which can smolder in the wood dust collector as a vacuum or with machines dust for a long time before the fire or flame producing dust/chips from metal, asbestos is detected. if you accidentally collect metal products, lead
Resumo do conteúdo contido na página número 11
SECTiON 2: CiRCUiT REQUiREMENTS Power Connection Device 110/220v Operation t he type of plug required to connect your machine to power depends on the type of service you cur- rently have or plan to install. We recommend using one of the plugs shown in f igure 2. Serious personal injury could occur if you connect the machine to power before com- pleting the setup process. DO NOT connect the machine to the power until instructed l5-30 plug & outlet later in this manual. for 110V Electrocutio
Resumo do conteúdo contido na página número 12
SECTiON 3: SETUP items Needed for This machine presents Setup serious injury hazards to untrained users. Read through this entire manu- t he following items are needed to complete the al to become familiar with setup process, but are not included with your the controls and opera- machine: tions before starting the machine! Description Qty • Assistants ................................................... 1 • Safety g lasses .................. For Each person 1 • Wrench ⁄2" ...............
Resumo do conteúdo contido na página número 13
General inventory (f igure 5): Qty inventory i. Upper r ails ............................................... 2 J. pull h andle ................................................. 1 K. Spring Clamp .............................................. 1 After all the parts have been removed from the L. r ubber Seal 1.6 M ..................................... 1 boxes, you should have the following items: M. h ose Clamps 7" ......................................... 2 N. d rum Suction h ose 1" ............
Resumo do conteúdo contido na página número 14
Site Considerations Weight Load Physical Environment Refer to the Machine Data Sheet for the weight The physical environment where your machine of your machine. Make sure that the surface upon is operated is important for safe operation and which the machine is placed will bear the weight the longevity of its components. For best results, of the machine, additional equipment that may be operate this machine in a dry environment that is installed on the machine, and the heaviest work- free fr
Resumo do conteúdo contido na página número 15
6. position the stand onto the dust collector 5 1 assembly housing, and install one ⁄16"-18 x 1 ⁄2" hex bolt and flat washer on each side of the stand at the to serve as pivot bolts (see figure 9 for To assemble your dust collector, do these location). steps: 5 7. Using a ⁄16" wrench, snug both hex bolts. 3 1. invert the stand, place one ⁄8" lock washer on four caster wheel studs, and thread each caster stud into the stand (figure 7). 3 2. Using a ⁄8" wrench, tighten each caster stud. piv
Resumo do conteúdo contido na página número 16
10. With the help of an assistant, raise the dust 12. Attach the casters to the bottom of the drum 3 3 collector to the upright position, and install using (4) ⁄8"-16 hex nuts, (4) ⁄8" flat washers, 5 3 3 the handle (figure 11) with (4) ⁄16"-18 x ⁄4" and (4) ⁄8" lock washers (figure 13). 5 hex bolts and ⁄16" washers. figure 13. dust collection drum casters installed. figure 11. installing the hand rail. 13. Attach the lid latches to the side of the drum 11. Engage the filter-element crank (fi
Resumo do conteúdo contido na página número 17
14. place the drum extender onto the drum so 16. place the dust bag seat into the duct collec- one latch is oriented with the drum spout as tion drum as illustrated in figure 17. shown in figure 15. figure 17. installing the dust collection bag seat. figure 15. drum extender and spout alignment. 17. insert the rubber seal over the top lip of the 15. Secure the drum extender to the drum with drum rim (figure 18). pay special attention the drum clamp (figure 16), and tighten the to the directio
Resumo do conteúdo contido na página número 18
18. install the dust collection bag into the collec- 20. Connect one end of the 1" hose and the 7" tion drum as illustrated in figure 19. hose to the collection drum (figure 21). ground Wire figure 19. Bag installation. 19. place the drum lid onto the drum, and roll the drum under the cyclone port so the drum spout is facing toward the dust collector, as illustrated in figure 20. figure 21. hose and bag installed. 21. Connect the other end of both hoses to the cyclone housing (figure 21),
Resumo do conteúdo contido na página número 19
5. press the on/oFF button to turn the machine Test Run ON. Make sure your hand stays poised over the switch in case you need to quickly turn the machine OFF. When the assembly is complete, test run your dust collection system to make sure it operates 6. listen to and watch for abnormal noises or properly. actions. the machine should run smoothly with little or no vibration or rubbing noises. —i f you suspect any problems, immedi- NOTICE ately turn the machine OFF and discon- if using a
Resumo do conteúdo contido na página número 20
SECTiON 4: COLLECTiON SYSTEM System Setup Duct Material the Model g0703 is designed to collect dust from you have many choices regarding main line and one machine at a time. this can be accomplished branch line duct material. For best results, use by either connecting it to one machine at a time metal duct for the main line and branch lines, then or by connecting it to multiple machines and using use short lengths of flexible hose to connect each blast gates to control which branch is ac
