Manual do usuário Acura 2D11011M

Resumo do conteúdo contido na página número 1

Instructions for the Use and Care of
Your Acura Car Cover
made of EVOLUTION Fabric
NOTICE: Do not dry this car cover in automatic dryers.
Your new cover will help minimize deterioration of the paint and upholstery of your
vehicle by shielding it from the ultra-violet rays of the sun, dirt, dust, tree leaves, sap,
bird droppings, industrial pollutants, and salt particles in the air. The cover, although
not waterproof, can keep your car dry in light precipitation, but not in a rainstorm. It
has be

Resumo do conteúdo contido na página número 2

REMOVAL To remove the cover, first release both ends from under the bumpers. Fold the cover from one side of the car toward the middle. Remove the mirror pockets from the side mirrors carefully; do not pull or tug on them as this may tear the cover, or break the mirrors. Make the fold about two feet wide (see figure B). Make the same fold from the other side of the car to meet the first folded section. Then fold the cover from the front to the back of the car in two foot folds (see figure C). P

Resumo do conteúdo contido na página número 3

USING THE CAR COVER CABLE AND LOCK Install the cable and lock as shown in the illustration. The locking system will be ineffective if the cable is incorrectly installed. The cable must be threaded through the loop on one end and locked to itself at the other end as shown (see figure D). The steel cable passes under the car and through the scratchproof grommets at the bottom of the sides of the cover. The cable is secured with the lock. The cover may be used with or without the lock and cable. PA

Resumo do conteúdo contido na página número 4

4 08P34-SEC-2001-81 © 2003 American Honda Motor Co., Inc. -All Rights Reserved.