Manual do usuário Sonic Alert DB200

Resumo do conteúdo contido na página número 1

SIGNALER DB SENSOR
INSTALLATION
To install the DB200, follow the diagrams and instructions on
the following page that match the type of installation you
need for your home. If the installation follows diagrams 1-4,
WIRELESS DOORBELL & TELEPHONE
a 9 volt alkaline battery is required in the DB sensor.
SIGNALER
MODEL DB200
Please check the switches on your DB200 Sensor before
installing. Do not change switches 1-6 these are pre set.
It’s very important that the switch settings

Resumo do conteúdo contido na página número 2

DB200 Signaler, larger of the 2 units: The speaker switch allows you to turn the Audio Alarm ON or OFF. ON is up and OFF is Down. Dip Switch settings DB 200 The Dip Switches 1-6 should match the DB Sensor Dip switches 1-6. The factory setting is 1 thru 3 ON and 4 thru th th on 6 OFF. The 7 and 8 switches are not active switches and it will not matter if they are set to ON or OFF, unless your using 2 sensors one for the front and one for the back door. off If you need to change th