Manual do usuário Stanton STR8-90

Resumo do conteúdo contido na página número 1

Resumo do conteúdo contido na página número 2

ASSEMBLY TONE ARM AND CARTRIDGE SETTINGS Remove all the parts from the box. Please check to make sure the The major cause of problems in sound and skipping on the vinyl is the following items are included with the main unit in the carton: lack of proper set up of the needle and turntable adjustments. The needle is designed to operate at a specific angle to the vinyl. The str8-90 has (1) Operating instructions several adjustments to correctly position the needle to the vinyl. (2) Pl

Resumo do conteúdo contido na página número 3

PART NAMES & FUNCTIONS 10) PITCH SLIDER Use this to change the speed of the platter when the PITCH button is lit. 11) HEADSHELL LOCKING NUT Attach the headshell by inserting into the front end of the tone arm, then turn the locking nut clockwise with the head shell firmly held horizontally. 12) TONE ARM This is a fully manual tone arm. To start playback, gently place the stylus on the record using the headshell finger support. Do not drop

Resumo do conteúdo contido na página número 4

SCRATCH PROTECTION SPECIFICATIONS The STR8-90 includes a TURNTABLE SECTION pair of rubber protectors. Starting Torque: More than 2.2kgf.com These were designed to Motor: 16pole, 3phase, brushless DC motor protect the turntable’s Platter: 330mm dia. Aluminum diecast rounded aluminum edges Pitch: +/-8%,+/-16%,+/-25% from the mixer while Brake: Electronic brake scratching. When the turntables are placed TONE ARM SECTION sideways, the round edges Tone arm type Static balanced st