Manual do usuário Epson WALITA RI4409

Resumo do conteúdo contido na página número 1

EPSON Product Support Bulletin
Date: 11/28/2007 Originator: JD
PSB #: PSB.2008.01.001 Authorization:

Reference: TE07-0449 Rev. A Total Pages: 3
Product(s): Epson P-3000 and P-5000 Multimedia Storage Viewers
Subject: New Firmware Release version 01.20

This bulletin was created to inform you of a firmware update for the P-3000/P-5000 multimedia
viewers. The updated firmware provides certain improvements as outlined below.


Description of Change:
The firmware has been updated to

Resumo do conteúdo contido na página número 2

To verify the current firmware version on your viewer, power on the unit, select Settings from the Home screen and press OK. In the Settings screen use the 4 way ring to scroll down to the firmware version menu. Press OK. If the firmware says 01.20.01.00, then you do not need to perform the update described in this bulletin. If you see an earlier version such as 01.10.01.00 (see image below), then proceed to the next section. Steps: 1. Install a blank memory card into a mem

Resumo do conteúdo contido na página número 3

During the update process, the message screen will display the current firmware and updated firmware versions. Then the message “Updating Resources” will appear. Important: Do not remove the battery or disconnect the AC adapter during the firmware update process. 6. The firmware update process is completed when you see this screen (see image below). 7. Power off the unit and remove the CompactFlash or SD memory card. 8. Power on the viewer and verify the new firmware ver

Resumo do conteúdo contido na página número 4

EPSON Product Support Bulletin Date: 2/27/2007 Originator: JD PSB #: PSB.2007.03.001 Authorization: Reference: TE06-0487 Rev. A Total Pages: 4 Product(s): Epson P-3000 and P-5000 Multimedia Storage Viewers Subject: New Firmware Release version 01.10 This bulletin was created to inform you of a firmware update for the P-3000/P-5000 multimedia viewers. The updated firmware provides certain improvements as outlined below. Description of Change: The firmware has been updated to version 01.10. Reas

Resumo do conteúdo contido na página número 5

P-3000/P-5000 Firmware Update Instructions: Note: Before starting the firmware update process, confirm that there are no files on the memory card. To download and install the new firmware file, you will need the following: • Windows-based PC or Macintosh computer with Internet access • Operating Systems: Windows 2000/XP Home/Pro/XP/XP Pro x64 Edition • Operating Systems: Macintosh OS 10.2.8 to 10.4.x • Memory card reader/writer • 128MB or higher formatted Compact Flash or SD memory card (there

Resumo do conteúdo contido na página número 6

2. Verify that the battery is installed in the P-3000 or P-5000 viewer. 3. Connect the AC adapter to the viewer, but do not power it on. 4. After the firmware file has been copied to the memory card, insert the CompactFlash or SD memory card into the viewer. 5. Press and hold down the “OK” and keys while sliding the “POWER” switch as shown below. When you see the firmware update screen (see image below), release the OK and keys. Note: If you do not see this screen, power off the unit and start

Resumo do conteúdo contido na página número 7

7. Power off the unit and remove the CompactFlash or SD memory card. 8. Power on the viewer and verify the new firmware version. It should say 01.10.01.00 (see image below). Page 4 of 4 PSB.2007.03.001