Resumo do conteúdo contido na página número 1
LTC0600
Digital Color Camera
Installation manual
Installationsanleitung
Manuel d’installation
Manuale d’installazione
Installatiehandleiding
Manual de instalación
Subject to changes without notice.
© Philips I&C 1999
3122 165 21872
Resumo do conteúdo contido na página número 2
Contents Contents FCC Statement ________________________________________________ 2 GB English ........................................................1 Important Safeguards____________________________________________ 3 D Deutsch ....................................................19 1. Introduction ________________________________________________ 6 Français ....................................................37 F 2. Features ____________________________________________________ 6 Italiano .......
Resumo do conteúdo contido na página número 3
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following WARNING two conditions: TO PREVENT FIRE OR SHOCK HAZARD, DO (1) This device may not cause harmful interference. NOT EXPOSE THIS UNIT TO RAIN OR (2) This device must accept any interference received including interference that may MOISTURE. cause undesired operation. The Camera series (LTC0500/60 and LTC0600/60) are provided with a correct polarized This equipment has been tested and found to c
Resumo do conteúdo contido na página número 4
9) Ventilation - Openings in the enclosure, if any, are provided for ventilation and to d) If the unit does not operate normally by following the operating instructions. ensure reliable operation of the unit and to protect it from overheating.These Adjust only those controls that are covered by the operating instructions, as an openings must not be blocked or covered.This unit should not be placed in a built-in improper adjustment of other controls may result in damage and will often require ins
Resumo do conteúdo contido na página número 5
6 Introduction Pr 7 eparation 1 3 The LTC 0600 series digital color camera offers an extremely high level of picture quality This manual describes how to install the hardware and how to use your video camera. and resolution for use in surveillance and observation systems. It supports passive (DC) iris, video iris and manual iris lenses.The camera is suitable for C mount and CS mount Check that the following items are present in the box: lenses.The camera automatically detects and adapts to the t
Resumo do conteúdo contido na página número 6
Mounting the lens 8 5 Lens connector specifications (rear view): The camera supports Manual Iris,Video Iris and DC Iris lenses. The use of Video or DC Iris lenses is recommended for outdoor use to prevent bleaching of the CCD. VIDEO IRIS DC IRIS 2 1 2 1 21 21 Lens mount, lens thread The lens mount should be C mount or CS mount (1”-32UN). No CS/C adapter is 43 43 4 required when using C mount lenses. 3 4 3 1 = 9VDC 40 mA max. 1 = Damping coil - Auto Lens Detection 2 = N.C. 2 = Damping coil + At p
Resumo do conteúdo contido na página número 7
Back f 10 ocus adjustment 11 Electrical Connections 6 7 The back focus screw is an ‘endless’ screw that turns the back focus ring.Turning the 7.1 AC MAINS POWER SUPPLY screw in either direction will move the sensor chip back and forth from C mount position to CS mount position. Mains voltage models: LTC0600/50 PAL LTC0600/60 NTSC C - CS Power cable & inner conductors Mount Camera models /50 are fitted with 2 wire power cable with Euro plug. LENS Digital Camera • Brown: Live, Reference line loc
Resumo do conteúdo contido na página número 8
13 Mounting the camera 8 7.3 VIDEO CONNECTIONS BNC composite video Sync. Input Video output Video output Y/C 4 pin connector or Top mounting: 1/4” 20 UNC 1 2 Balanced 4 pin connector Max lens weight: 0.5 kg (selectable via PC software) 3 4 + – 7.4 SYNCHRONIZATION H-V LOCK Y/C OUT/ Balanced CVBS OUT Digital Colour Camera CONNECTION (SYNC) The vertical and horizontal camera RS232 4 synchronization signals can be generated: • internal x-
Resumo do conteúdo contido na página número 9
9.2.1 Mode setting The camera is delivered operating in Mode 1. Mode 3 Default mode 30 sec. Default Default In total three modes are available. Mode 2 Mode 1 = Backlight compensation Mode 1 Mode 2 = Traffic Default mode Mode 3 = Night (low light mode) Mode 0 is a non-programmable mode (Default mode) in which factory settings are stored. 9.2.2 Video level setting Digital Camera The nominal video level setting is 700 mV contrast. Adjustments are possible in +30/-30 steps. Mode LVL BLC 9.2.3 Backli
Resumo do conteúdo contido na página número 10
9.2.7 Linelock Phase AGC: 18 dB 2 This function is active when the camera operates in linelock mode. Selectable ): 24 dB Automatic shutter: up to 1/100,000 sec. 9.2.8 H Phase 2 Selectable ): ON, OFF, Flickerless This function is active when the camera operates with external synchronisation (H+V). Use the H-phase setting to adjust Horizontal timing differences when cameras are H-V Manual shutter: 1/60 up to 1/10,000 synchronised. Input standard CVBS synchronisation signals. 2 Selectable ): 9.2.9
Resumo do conteúdo contido na página número 11
Inhalt Lens: FCC-Konformitätserklärung ____________________________________________ 20 DC-iris Control & Drive 40 mA max Video-iris 9-10 Vdc 40 mA max.Video drive level 1 V[ ] Wichtige Sicherheitshinweise __________________________________________ 21 p-p MECHANICAL 1. Einleitung ________________________________________________________ 24 Dimensions: 65 x 70 x 149 mm (HxWxD*) * including connectors 2. Merkmale ________________________________________________________ 24 Weight: 0.6 kg 1 Camera mo
