Resumo do conteúdo contido na página número 1
EZ Series
EZ Series
High Resolution Weatherproof Camera
High Resolution Weatherproof Camera
User’s Manual
and
Operation Instructions
Resumo do conteúdo contido na página número 2
Notice This manual is presented to the users of EZ series by EverFocus Electronics Corp. With years of engineering researches, EverFocus has spared no effort to provide the high quality products to the worldwide users. For the policy of continual product improvement, EverFocus reserves the right to make changes to the product specifications and documentation without notice. All the components of the products, including accessories, components, and outlook, are based o
Resumo do conteúdo contido na página número 3
Table of Contents Safety Warning …………………………………… .. 1 Introduction…………………………………………. 2 Specification………………………………………… 3 Major Parts Names… ..……………………………… 4 Installation Instructions………………………… .… .. 5 Settings……………………………………………… .7 Simple Instructions for the desiccant pack………… . 10
Resumo do conteúdo contido na página número 4
Safety Warning 1. Handle the camera with care. Be careful when handling the camera, do not drop it or subject it to strong shock or vibration to prevent any damages to it. Do not disassemble it or place it on an unstable base. 2. Do not install the camera near electric or magnetic fields. Installed the camera away from TV, radio transmitter, magnet, electric motor, transformer, audio speakers because the magnetic fields generate from above devices will distort the video
Resumo do conteúdo contido na página número 5
Introduction The new EZ series offers great performance in 1/3”image format color CCD camera. The EZ series is ideal for outdoor applications such as parking lots, gas stations or shopping malls. The sophisticated circuit design provides a heater that turns on at 10 for cold weather. The EZ series will provide protection against the elements and provide an excellent quality picture. Main Features : ?? High Resolution: 520 TV Lines. ?? Built-in Aspherical vari-foc
Resumo do conteúdo contido na página número 6
Specification Model 350HQ 550EX Pickup device: 1/3” interline transfer CCD NTSC: 768(H) x 494(V) Picture element: PAL: 752(H) x 582(V) Horizontal resolution: 520 TV Lines 0.5lux/F=1.2; 1.0lux color, 0.15lux Sensitivity: 1.43lux/F=1.6 monochrome/F=1.2 Video output: 1.0Vp-p, 75 ohm Vari-focal lens f=3.8~9.5mm / Lens focal length: Vari-focal lens f=3.7~12mm Gamma Correction: >0.45 S/N ration: Over 48db Back light Comp.: On/Off switch Auto gain control: On/Off switch Flick
Resumo do conteúdo contido na página número 7
Major Parts Names and Their Functions Back Fixing Plate Back Fixing Plate Swivel Swivel Screw Screw Mounting Mounting Set-Screw Base Base Sun Shield Sun Shield Assembly Assembly Cover Cover Screw Screw Fixing Screw Fixing Screw Front Front Fixing Plate Fixing Plate IRIS ALC/Level Adjustment IRIS ALC/Level Adjustment O O- -ring Seal ring Seal Focus Focus Zoom Zoom Lens Lens Heater Heater Mounting Bracket Mounting Bracket Control Switch Control Switch 4
Resumo do conteúdo contido na página número 8
Installation Instructions 1. Using the supplied screws, mount the bracket base on the desired location. 2. Connect the BNC connector of the camera to a monitor or other video device through a 75 ohm type coaxial cable with BNC female connector at cable extension. 3. Connect the AC24V or DC12V regulated power source of the camera (power jack) to the power-in jack with 2mm plug. For DC12V power source, please make sure the power plug is center+ outer- for heater normal operation. 4. I
Resumo do conteúdo contido na página número 9
g. When all the adjustments and settings are completed, overlaying the cover gently. Be careful not to damage to the “O”-Ring and camera components. h. To reassemble the sun shield, match the hole on the sun shield to the back fixing plate of camera, Fix the screw on the front fixing plate. Make sure the wider side of the fixing plate holds the edge of the camera well. 5. Attach the camera onto the mounting bracket. 6. Loosen the swivel screw and point the camera to the desired direc
Resumo do conteúdo contido na página número 10
Settings The camera is set up at factory and normally requires no adjustments. Sometimes, however, adjustments may be necessary. Please refer to the following description for the function details. ??The IRIS ALC and IRIS Level adjustments are located on the side circuit board, use a screwdriver to adjust if it’s necessary. IRIS Level IRIS ALC Adjustment Adjustment Control Switches IRIS Level Adjustment To adjust brightness level – ?? Turn the IRIS Level Adjustment
Resumo do conteúdo contido na página número 11
??The 4 control switches are also located on the side circuit board, the switches in orders are for Flickerless, Back Light Comp, Auto Gain Control and Line Lock. FL Normal On On BLC Normal On On AGC Off On On LL Off On On Control Switches FL(Flickerless) Normal/On When picture flicker fiercely, turn FL on, then the camera will stabilize the speed of electronic shutter at 1/100(NTSC) or 1/120(PAL) automatically, and reduce the flicker immediately. The default
Resumo do conteúdo contido na página número 12
AGC (Automatic Gain Control) Off/On AGC ON: The sensitivity increases automatically when light is low. AGC OFF: A-low-noise picture is obtained under a low light condition. The default setting is On. LL (Line-Lock) Off/On To select the sync mode between Internal Sync.(LL off) and Line-Lock (LL on). Set the line-lock off, the camera will synchronize to the internal time base. Set the line-lock on, the camera’s vertical synchronization can be driven by the AC signal in the power lin
Resumo do conteúdo contido na página número 13
Simple Instructions for the desiccant pack Due to the camera lens blurred from the humidity inside the camera. The desiccant pack absorb the humidity and easy instruction as following: 1. Adjust all settings first and place the desiccant pack into the gap of the machine and fix it. 2. Install the cover and overlaying gently. Installation steps for the EZ Series: Step 1. Desiccant pack Step 2. 10
Resumo do conteúdo contido na página número 14
EverFocus Electronics Corp. Head Office: China Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Room 609, Technology Trade Hsi-Chih, Taipei, Taiwan Building, TEL: +886-2-26982334 Shandgdi Information Industry FAX: +886-2-26982380 Base, www.everfocus.com.tw Haidian District, Beijing,China TEL: +86-10-62971096 FAX: +86-10-62971432 www.everfocus.com.cn USA Office: Japan Office: 2445 Huntington Drive, San Marino, 1809 WBG MARIBU East 18F, CA 91108, U.S.A. 2-6 Nakase.Mi
