Resumo do conteúdo contido na página número 1
™
TROPHY CAM
INSTRUCTION MANUAL
VIDEO
Model#s: 119466 / 119467
Lit# 98-2019 / 4-11
Resumo do conteúdo contido na página número 2
2
Resumo do conteúdo contido na página número 3
TABLE OF CONTENTS PAGE # ENGLISH 4-33 FrANçAIS 34-70 ESPAñOL 71-107 DETSCH u 108-147 ITALIANO 148-186 POr TuGuêS 187-223 3
Resumo do conteúdo contido na página número 4
IMPORTANT NOTE Congratulations on your purchase of one of the best trail cameras on the market! Bushnell is very proud of this little unit and we are sure you will be pleased with it as well. We appreciate your business and want to earn your trust. Please refer to the notes below and the instructions in this manual to ensure that you are completely satisfied with this product. If your Bushnell Trophy Cam does not seem to be functioning properly or if you are having photo/video quality is
Resumo do conteúdo contido na página número 5
ENGLISH INTRODUCTION About the Trophy Cam The Bushnell Trophy Cam is a digital scouting camera. It can be triggered by any movement of game in a location, detected by a highly sensitive Passive Infra-Red (PIR) motion sensor, and then take high quality pictures (up to 8MP still photos), or video clips. The Trophy Cam consumes very little power (less than 300mA) in a stand- by (surveillance) state. This means it can deliver up to six months stand-by operation time when the device is powered by
Resumo do conteúdo contido na página número 6
Light FRONT VIEW Sensor Video Mic LED IR Flash Motion/ Low Battery Indicator DC in Lens Cover Plug Tripod Socket Lock Hole Fig. 1: Connections PIR Sensor Video Mic A/V Out USB Port Latch DC In SD Card Slot BACK VIEW Cable to Battery Compartment LCD Screen UP/Video DOWN/Photo LEFT MENU OK/Replay Power/Mode ON RIGHT/Shot Switch SETUP OFF Fig. 2: Button and Switch Guide 6
Resumo do conteúdo contido na página número 7
INSTALLING THE BATTERIES AND SD CARD Before you begin learning how to use your Trophy Cam, you will first need to install a set of batteries and insert an SD card. Although that may only take you a minute, there are some important notes about both batteries and SD cards you should be aware of, so please take the time to read the following directions and cautions: 1 3 5 7 9 11 Battery Slot #s Loading Batteries 2 4 6 8 10 12 After opening the two latches on the right side of the Trophy Cam, y
Resumo do conteúdo contido na página número 8
When the batteries become weak, the low-battery indicator LED will glow blue, indicating the batteries should be changed (pg 6, “Front View”). Inserting the SD Card The Trophy Cam has 32MB of internal memory (119466 only), which can hold only about 20 photos (@ 5MP resolution). This is handy for testing and getting familiar with the camera, but you will no doubt want to leave the camera unattended for longer than a day, so using an SD card is recommended for all models. Insert the SD card
Resumo do conteúdo contido na página número 9
USING THE TROPHY CAM Once you’ve prepared your Trophy Cam by properly installing batteries and an SD card, you could simply take it outside, strap it to a tree, switch it on and leave-and you might get some great photos that are exactly what you wanted. However, we highly recommend that you first spend some additional time indoors with this manual and your camera until you know a bit more about what the 3-way switch and those control keys do. If nothing else, you’ll probably want to at lea
Resumo do conteúdo contido na página número 10
videos automatically (according to its current parameter settings) when it is triggered by the PIR sensor’s detection of activity in the area it covers. You can either move the power switch directly from OFF to ON mode, or stop at the SETUP position first to change one or more settings, then move the switch to ON after you have finished doing so. SETUP MODE In the SETUP mode you can check and change the settings of the Trophy Cam with the help of its built-in LCD (or a monitor connected to
Resumo do conteúdo contido na página número 11
Fig. 3: SETUP Information Screen (standard display model shown) Image Size (Resolution) SD Card Status Still Photo Mode Battery Level Date:Month-Day-Year Time Stamp Time Field Scan On Hour:Minute:Second # of Photos Taken * Remaining Photo Capacity * Model 119466 only Audio Rec On Video Resolution Video Mode Available Video Recording Time 11
Resumo do conteúdo contido na página número 12
USING THE SETUP MENU TO CHANGE SETTINGS The main purpose of the SETUP mode is to allow you to change the settings of the camera’s parameters (12-13 different ones are available) so your Trophy Cam operates exactly the way you want it to. You will do this by entering the SETUP Menu and pressing the keys below the LCD display, which will show you each parameter and its setting. Changing Parameter Settings in SETUP Mode A wide range of options or “parameters” are provided to allow you to set
Resumo do conteúdo contido na página número 13
The checkmark will appear next to your new setting to confirm this (Fig. 4c). • On models with standard (non-color) display, only one setting is displayed at a time, starting with the current setting for the parameter when it is first selected (Fig. 4d). To change the setting, use the UP/ DOWN keys to display the new setting you want (Fig. 4e), then press OK to “Execute” (make the actual change to this setting). If you want to confirm this setting is now the current one, just press the R
Resumo do conteúdo contido na página número 14
EXAMPLES-Changing the Settings of Some Common Parameters Following this page, you will find tables listing all of the parameters found in the SETUP Menu, along with their possible settings (or range of settings), and a detailed description of what the parameter controls and what the settings do. If you read the previous section detailing how to select parameters and change their settings, you should be able to dive right in, find the parameter(s) you want, and setup the camera to your prefe
Resumo do conteúdo contido na página número 15
Field Scan Feature Field Scan is a revolutionary new feature for the Bushnell Trophy Cam, which allows you to monitor your food plots or field edges with time lapse images or video. When set to “On”, the Trophy Cam will take a photo (or record a video clip) automatically at your choice of intervals during a block of time you set up for each day, without requiring a trigger from an active animal. This has the advantage of giving you the ability to monitor the edge of a field that might be
Resumo do conteúdo contido na página número 16
for videos, this is independent of the length of each video recording- it’s how often videos are recorded, not how long each one lasts. Your options are 60 minutes, 30 minutes, 15 minutes,5 minutes (this is the default), or 1 minute-use the UP/DOWN keys to select your preference, then press OK to save it. 6. Here’s an example of how the camera would operate, based on the fol- lowing Field Scan settings: Field Scan: On [Start]: 16:00 [Stop]: 18:30 Interval: 15M These settings would cause the c
Resumo do conteúdo contido na página número 17
The SETUP Menu – Parameters and Settings List w/Descriptions Parameter Description Settings (Bold=default) Mode Selects whether still photos or video Camera or clips are captured when the camera is Video triggered. Selects resolution for still photos from Image Size 5M Pixel, 3 to 8 megapixels. Higher resolution (only affects 8M Pixel, produces better quality photos, but still photos) 3M Pixel creates larger files that take up more of the SD card capacity (fills up faster). 5M is a
Resumo do conteúdo contido na página número 18
Parameter Description Settings (Bold=default) Interval Selects the length of time that the 10S (second) camera will “wait” until it responds to default, any additional triggers from the PIR after with a 60M an animal is first detected and remains (minute) to1S within the sensor’s range. During this (second) range user set “ignore triggers” interval, the of settings camera will not capture photos/videos. available. This prevents the card from filling up with too many redundant imag
Resumo do conteúdo contido na página número 19
Parameter Description Settings (Bold=default) Format Execute Deletes (erases) all files stored on a card to prepare it for reuse. Always (followed by an format a card that has been previously additional No/ used in other devices. Caution! Make Yes step on color sure you have downloaded and viewer models backed up any files you want to only) preserve first! Press OK to execute (then select Yes and press OK again on color viewer models), press MENU (or select NO then press OK) to exi
Resumo do conteúdo contido na página número 20
Parameter Description Settings (Bold=default) Field Scan On, Off Turns Field Scan (Time Lapse) recording mode on/off. Pressing OK with On selected will go to the Set Field Scan screen, which allows you to set the Start and Stop times in hours (0-24) and minutes (00-59).This is setting the time each day for recording to begin and end (24 -hr clock, so 13:00 hours=1PM). Use the RIGHT key to step through the fields, and use UP/DOWN to change the settings. After you set the “Stop” minute
