Resumo do conteúdo contido na página número 1
ViviCam X028 Digital Camera
User Manual
© 2010 Sakar International, Inc. All rights reserved.
Windows and the Windows logo are registered trademarks of Microsoft Corporation.
All other trademarks are the property of their respective companies.
Resumo do conteúdo contido na página número 2
Contents Introduction .................................................................................................................................. 2 What‟s Included ............................................................................................................................ 2 Parts of the Camera ..................................................................................................................... 3 Initial Camera Setup .....................................
Resumo do conteúdo contido na página número 3
Introduction Thank you for purchasing this camera. Everything you need to take quality digital photos and videos is included with your camera. Vivitar makes capturing those special moments as easy as possible. Please read this manual carefully first in order to get the most out of your digital camera. NOTE: Your camera needs an SD Memory card (up to 32GB) for normal use. SD Memory cards are not included and need to be purchased separately. What‟s Included 1. Digital Cam
Resumo do conteúdo contido na página número 4
Parts of the Camera 1. Power Button 12. LCD Screen 2. Shutter Button 13. Lens 3. LED 14. Flash 4. W / Zoom Out 15. Microphone 5. T / Zoom In 16. Speaker 6. Mode 17. Macro Switch 7. Up / Flash / Slide Show 18. USB Slot 8. Right / Delete 19. Strap Hole 9. SET (Menu/OK) 20. Tripod Socket 10. Down / ViviLink 21. SD Card Slot 11. Left / Scene 22. Battery Compartment 3
Resumo do conteúdo contido na página número 5
Initial Camera Setup Installing the Batteries Installing the Memory Card SD Memory card (up to 32GB) needed for normal use Turning On the Camera Using the Camera Selecting the modes Accessing the menu 4
Resumo do conteúdo contido na página número 6
When powering the camera ON for the first time the camera will take you through the INITIAL CAMERA SETUP. Powering the Camera ON 1) Make sure the batteries have been inserted properly into your digital camera. Use 2x AA (1.5v) batteries (not included). Alkaline batteries recommended. 2) Make sure an SD card has been properly inserted into your camera (until a click sound is heard). NOTE: After the camera is powered on, an SD icon will appear on the LCD display. If you do not see th
Resumo do conteúdo contido na página número 7
Setting the Date and Time The next step in the initial camera setup is to set the date and time on the camera. Set the Date and Time as Desired and press the SET button to confirm the selection and move to the next part of the camera setup. Setting the ViviLink Default Option Once the Date and Time have been set, you will be asked to set the default ViviLink destination for photos and videos taken with your camera. The ViviLink technology allows you to quickly and easi
Resumo do conteúdo contido na página número 8
Main Camera Modes Your camera has different modes for the various camera functions. You can switch modes by pressing the MODE button on your camera after the camera has been powered ON. Photo Capture Mode Use this mode to capture pictures with your camera. This is the default mode when the camera is powered ON. To take a picture, aim your camera as desired and press the Shutter button. The picture will be automatically saved to your camera‟s memory card. To access the various menus f
Resumo do conteúdo contido na página número 9
Camera Technical Specifications Image Sensor CMOS Sensor (10M) 3648 X 2736 pixels, (8M) 3264 X 2448 pixels, (7M HD) 3648X2048 pixels, (5M) 2592x1944 pixels, Image Resolution (3M) 2048x1536 pixels, (2M HD) 1920x1080 pixels and (VGA) 640x480 pixels Video Resolution 640X480 pixels (30 fps), 320X240 pixels (30 fps) File Format JPEG/AVI Internal Memory 1 Test Photo Use Only External Memory SD Card (up to 32GB) LCD Display 2.4 Inch TFT Lens f=7. mm F3.0 Zoom 4X Digital Zoom Exposure -
Resumo do conteúdo contido na página número 10
Computer System Requirements – WINDOWS OS To be able to download photos and videos to your PC, you will need the following minimum configuration: Pentium 4 processor or above with Windows XP service pack 2, Windows Vista or Windows 7 512 MB RAM, with 100MB of free disk space 1024 x 768 Recommended screen resolution 16-bit color or higher display adaptor CD-ROM Drive QuickTime 6 or higher Microsoft Internet Explorer 7 or higher Windows Media Player 10 or higher
Resumo do conteúdo contido na página número 11
Powering the Camera On/Off Make sure the batteries have been inserted properly into your digital camera. If your camera comes with a rechargeable lithium battery, make sure it is fully charged before the first use. Powering the camera ON Press the Power button to turn your camera ON. The camera will be in Photo Capture mode to start. Powering the camera OFF While the camera is on, you can press the Power button again at any point to turn your camera OFF. You will see a “Goodbye”
Resumo do conteúdo contido na página número 12
When in Photo Capture Mode, this icon will display on the top-left corner of the LCD display When in Video Capture Mode, this icon will display on the top-left corner of the LCD display When in Playback Mode, this icon will display on the top-left corner of the LCD display Navigating the Menus Each camera mode has a set of menus specific to that mode. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT direction control buttons to scr
Resumo do conteúdo contido na página número 13
Photo Capture Mode The Photo Capture mode allows you to capture pictures with your digital camera. Taking a Picture 1) While in Photo Capture mode, use the LCD display on the back of the camera to direct the camera at the scene you would like to capture. 2) Click the T/Zoom In and W/Zoom Out buttons to zoom in/out if desired. NOTE: The actual shape of these buttons may vary per camera model. 3) Click the Shutter button to take the picture. 4) The picture will automatically be saved
Resumo do conteúdo contido na página número 14
Photo Capture Mode Quick Function Buttons Your digital camera has a four-directional pad that functions as Quick Function buttons: Quick Function Button Function Scene Selection – Opens the Scene menu Left Flash Options – Toggles the Flash options appearing on the LCD Up Delete – Allows you to delete the last photo taken Right ViviLink – Opens the ViviLink for Photos menu Down Other Captures the Picture Shutter Opens the menu options for Photo Capture Mode NOTE: T
Resumo do conteúdo contido na página número 15
Flash Options There are several Flash options available on your camera. The options appear on the Photo Capture Mode LCD screen in sequence. To change the Flash mode, press the UP Quick Function button until you arrive at your desired settings. NOTE: The Macro mode must be turned OFF when you want to use the Flash. Slide the Macro Switch to the mountain icon . The icon will appear on the LCD display. Flash Type Description No flash will appear. Use this when you do not want
Resumo do conteúdo contido na página número 16
Macro Switch / Your camera contains a Macro Switch that allows you to manually enable or disable the Macro mode on your camera. While using the Macro mode, you can capture images at close range (30 ~ 45 cm). To turn the Macro mode ON, slide the Macro Switch up on the side of your camera to the flower icon . When enabled, the Macro mode will allow your camera to focus on an object that is close to the camera. The flower icon will appear on the LCD and indicates that the Macro mode is on.
Resumo do conteúdo contido na página número 17
Photo Capture Mode Menus The following are the menus that appear in your camera‟s Photo Capture Mode: 16
Resumo do conteúdo contido na página número 18
Scene Menu The Scene Menu allows you to choose scene settings that allow your camera to adapt properly to your current environment. NOTE: When selecting the HIGH SENSITIVITY Option, by default the camera switches off the FLASH automatically (if it‟s ON) to optimize the picture quality. If however, you would like to override it and manually turn ON the flash – you can do so. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT direction control bu
Resumo do conteúdo contido na página número 19
6) Press the LEFT or RIGHT button to select the next menu item. 7) Press the MODE button to exit the menu and return to your previous mode. 8) An icon reflecting your selection will display on the LCD screen. 9) Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settings. Image Quality Menu The Image Quality menu allows you to select the desired quality level of the images taken by your camera. Keep in
Resumo do conteúdo contido na página número 20
3) Press the UP or DOWN direction control buttons to scroll through the menu options. 4) Press the SET button to select and save the desired option. 5) A selected option icon will appear on the selected item. 6) Press the LEFT or RIGHT button to select the next menu item. 7) Press the MODE button to exit the menu and return to your previous mode. 8) An icon reflecting your selection will display on the LCD screen. 9) Remember that this setting will be saved by your camera until you manua
