Resumo do conteúdo contido na página número 1
WV-CL924 CL924
Color CCTV Cameras
Operating Instructions
Model No. WV-CL920A
WV-CL924A
(Lens : option)
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
Resumo do conteúdo contido na página número 2
Power disconnection. Unit with or with- out ON-OFF switches has power sup- CAUTION plied to the unit whenever the power RISK OF ELECTRIC SHOCK cord is inserted into the power source; DO NOT OPEN however, the unit is operational only when the ON-OFF switch is in the ON position. Unplug the power cord to dis- CAUTION: connect the main power for all unit. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SER- VICEABLE PARTS INSIDE. For U.S.A REFER SERVICING TO QUALIFIED S
Resumo do conteúdo contido na página número 3
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli- fiers) that produce heat. 9) Do not defeat the safety purpose of the polari
Resumo do conteúdo contido na página número 4
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-overs. S3125A 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, li
Resumo do conteúdo contido na página número 5
CONTENTS IMPORTANT SAFETY INSTRUCTIONS .......................................................................................................................... 3 PREFACE ....................................................................................................................................................................... 6 FEATURES .....................................................................................................................................................
Resumo do conteúdo contido na página número 6
PREFACE Panasonic's WV-CL920A (WV-CL924A) series digital color camera introduces a new level of high picture quality and high resolution through the use of a 1/2-inch frame interline transfer CCD image sensor having 768 horizontal pixels (picture elements), and digital signal processing LSI's. This model offers cutting-edge tech- nology for advanced video surveillance. -6-
Resumo do conteúdo contido na página número 7
FEATURES 1. The following functions are built in. 6. High quality picture: (1)Auto Light Control (ALC)/Electronic Light (a) 2H type vertical enhancer for greater picture Control (ELC) sharpness (2) Back Light Compensation (Auto: Factory pre- (b) Chroma averaging circuit for better color signal set, Manual: Manual photometric measuring to noise ratio area set) (c) Minimum of aliasing on fine objects (3)Various External Sync Functions, including (d) Expanded dynamic range by use of knee cir- Gen-L
Resumo do conteúdo contido na página número 8
PRECAUTIONS 1. The installation should be made by qualified 5. Clean the CCD faceplate with care. service personnel or system installers. Do not clean the CCD with strong or abrasive deter- gents. Use lens tissue or a cotton tipped applicator and ethanol. 2. Do not attempt to disassemble the camera. To prevent electric shock, do not remove screws or covers. 6. Never face the camera towards the sun. There are no user serviceable parts inside. Ask a Do not aim the camera at bright objects. Whether
Resumo do conteúdo contido na página número 9
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS q w e !4 !6 120V AC 60Hz VIDEO OUT GND ALARM OUT !3 GND DAY/ IN NIGHT GEN-LOCK FB LOCK WV-CL920A !2 !5 t r !7 !1 o DC 12V AC 24V VIDEO OUT IN IN GND ALARM Hi-Z G/L 75Ω 1 !3 OUT GND DAY/ IN NIGHT 2 GEN-LOCK FB LOCK WV-CL920A GND !2 i !0 y u Slide the panel to the left until it locks. -9-
Resumo do conteúdo contido na página número 10
q Auto Iris Lens Connector i Left Button (L) This connector is used to connect the auto iris lens This button is used to move the cursor to the left. It with a 4-pin male connector supplied as a standard is also used to select the mode and can be used to accessory (Part No. YFE4191J100). adjust some levels. w Flange-back Adjusting Ring (FB) o Up Button (J) This ring is used to adjust the back focal length or This button is used to move the cursor upward. It is picture focus. Rotate this ring upw
Resumo do conteúdo contido na página número 11
!4 Alarm Output Terminal (ALARM OUT/GND) Caution: Connect to 12 V DC (10.8 V-16 V) or 24 V Connects to the alarm input connector (terminal) of AC (19.5 V-28 V) class 2 power supply only. Be an external device. When the camera detects sure to connect the grounding lead to the GND motion, the alarm output signal is supplied to the terminal when the power is supplied from a 24 V connected external device (Open collector output: AC power source. 16 V DC, 100 mA max). !5 Day/Night Input Terminal (DAY
Resumo do conteúdo contido na página número 12
CONNECTIONS connected to this terminal. The camera detects the A. WV-CL920A (120 V AC 60Hz) power source automatically. 1. Plug the AC power cord (supplied as standard accessory) into the AC Inlet Socket. DC 12V AC 24V 1. 12 V DC Power Supply IN IN 2. Connect the AC power cord to a 120 V AC 60 Hz Connect the power cord 1 outlet. to the AC/DC compatible Notes: 2 input terminal on the rear • Connect the power cord firmly. 12 V DC panel of the camera. • The power cord should be long enough for pa
Resumo do conteúdo contido na página número 13
2. 24 V AC Power Supply Type of RG-59/U RG-6/U RG-11/U RG-15/U coaxial cable (3C-2V) (5C-2V) (7C-2V) (10C-2V) Connect the power cable to the AC/DC compatible input terminal on the rear panel of the camera. Recommended (m) 250 500 600 800 maximum cable length (ft) 825 1 650 1 980 2 640 DC 12V AC 24V IN IN 1 2 Alarm and DAY/NIGHT Connections GND 24 V AC, 60 Hz 1. Connect an optical sensor to the DAY/NIGHT IN ter- (19.5 V - 28 V) minal. • Color/black-and-white input terminal with a capacity of 5
Resumo do conteúdo contido na página número 14
3. Solder each wire to a pin as follows. Replacement of Auto Iris Lens Pin #1: Red/Power Connector Pin #2: Not used If necessary, replace the existing lens connector with Pin #3: White/Video the type YFE419J100 supplied. Pin #4: Black/GND, Shield 1. Cut the existing lens connector at the end of the iris control cable. Rib Pin 3 Pin 1 Pin 4 Pin 2 4. Attach the cover to the connector. 2. Process the cable end as shown in the figure. 8 mm (5/8) Cover 2 mm (1/16) Lens -14-
Resumo do conteúdo contido na página número 15
Mounting the Lens Caution for Mounting the Lens The lens mount should be a CS-mount (1”-32UN). In Caution: Before you mount the lens, loosen the fixing screw case of a C-mount, it should be a C-mount adapter and the lens weight should be less than 450 g (0.99 lbs). If on the side of the camera, and rotate the flange- back adjusting ring counterclockwise until it stops. the lens is heavier, both the lens and camera should be secured by using the supporter. If the ring is not at the end, the inner
Resumo do conteúdo contido na página número 16
FOCUS OR FLANGE-BACK ADJUSTMENT The following adjustment should be made by qualified 3. Tighten the screws on the side of the camera. service personnel or system installers. Caution: Tightening the screw by force will cause 1. Loosen the screw on the side of the camera. damage to the screw or deviation of focus. Flange-back Adjusting Ring Screw 2. Turn the flange-back adjusting ring to the desired position. Note: Adjusting a focus in the visible rays may be soft-focused with the near-infrared li
Resumo do conteúdo contido na página número 17
INSTALLATION OF CAMERA • Mounting from the top Fixing Screws Remove the mount adapter from the bottom of the camera by removing the two fixing screws. Attach the mount adapter to the top as shown in the dia- gram, then mount the camera on the mounting bracket. Mount Adapter Use the two original screws to attach the mount adapter to the camera. Using shorter ones may cause the camera to fall down, and using longer ones may damage the inside of the camera. -17-
Resumo do conteúdo contido na página número 18
SETUP 1. CAMERA SETUP MENU This camera utilizes a user setup menu that is displayed on-screen. The setup menu contains various items that form a tree type structure. CAM SETUP Camera Light Electronic White Lens Drive Signal AGC Shutter SYNC Motion Special Sensitivity Selection ID Control ON(DNR-H)/ON(DNR-M)/ Balance Enhancement Speed INT/LL Detector Menu ON/OFF ON(DNR-L)/OFF ALC ELC ATW1 ATW2 AWC OFF/AUTO/FIX DC VIDEO BURST Camera PRESET PRESET ON PRESET PRESET ON VBS VS LL Manual BW U
Resumo do conteúdo contido na página número 19
Note: The menu displayed on the monitor will close and • Opening the Setup Menu change to the camera picture if no button is Hold down I for 2 seconds or more to display the pressed for 5 minutes. CAM SET UP menu. You can confirm the current set- tings on the menu. Blinking ** CAM SET UP ** CAMERA ID OFF ALC/ELC ALC SHUTTER OFF AGC ON(DNR-H) SENS UP OFF SYNC INT WHITE BAL ATW1 MOTION DET OFF LENS DRIVE DC END SET UP DISABLE Check t
Resumo do conteúdo contido na página número 20
Left Button (L): Moves the cursor to the left. Use 2. SETUP OPERATION this button to select or adjust the This camera utilizes a user setup menu (CAM SET UP) parameters of the selected item. that is displayed on the monitor. The parameter changes each time To set items on the CAM SET UP menu, use the follow- this button is pressed. ing buttons on the side panel. Set Button (I): Executes selection and displays a submenu for an item with N mark. Up Button • To reset the parameter of an item to the
