Resumo do conteúdo contido na página número 1
WB-S681U Pendant Mount
WB-S682U Wall Mount
WB-S684U Outdoor Pendant Mount
WB-S685U Ceiling Recessed Bracket
WB-S681U WB-S681U
WB-S681 WB-S681
INSTRUCTIONS
Thank you for purchasing this product.
To obtain the best results from your bracket, read these instructions carefully before use; retain the manual for
future reference.
The "INSTRUCTIONS" section below is applicable to WB-S681U/WB-S682U/WB-S684U/WB-S685U. Please
refer to the installation procedures for the purchased product during installa
Resumo do conteúdo contido na página número 2
IMPORTANT SAFEGUARDS 1.Read all of these instructions. 2.Save these instructions for later use. 3.All warnings on the product and in the operating instructions should be adhered to. 4.Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 5.Do not use attachments not recommended by the appliance manufacturer as they may cause hazards. 6.Do not use this appliance near water - for example, near a bathtub, w
Resumo do conteúdo contido na página número 3
Operating Precautions For safety reasons special techniques are necessary for installation. Consult your dealer regarding installation, and ensure that it is carried out by a specialist. Be sure to mount the safety wire for safety purposes. If it falls, it may cause injury or accidents. As the combination camera rotates at high speed, ensure that you install the camera at a location with sufficient strength to support the vibration and weight. If the ceiling material is not strong enough
Resumo do conteúdo contido na página número 4
WB-S681U Pendant Mount Notes on Installation ● Check that the installation location is able to withstand the total weight of the camera, which is about 3.7 kg, before you install. If the location is not strong enough, reinforce with a reinforcing board. ● Always use a wire rope to install. ● Screws to secure WB-S681U to the ceiling are not provided. Use the appropriate screws based on the materials, structure and total weight of the installation location. ● Conform to the local standards duri
Resumo do conteúdo contido na página número 5
WB-S682U Wall Mount Notes on Installation ● Check that the installation location is able to withstand the total weight of the camera, which is about 2.9 kg, before you install. If the location is not strong enough, reinforce with a reinforcing board. ● Always use a wire rope to install. ● Screws to secure WB-S682U to the wall are not provided. Use the appropriate screws based on the materials, structure and total weight of the installation location. ● Conform to the local standards during the
Resumo do conteúdo contido na página número 6
WB-S684U Outdoor Pendant Mount Notes on Installation ● Consult your dealer on the installation location. ● We will not be responsible for any accidents that occur as a result of flawed installation. ● Pay due attention to the installation location and method. ● If the location is not strong enough, reinforce with a reinforcing board and check for safety before installing. WB-S684U is an outdoor model. Top cover WB-S684U is exclusively used for VN-V686WPU and TK-C686WPE (For Europe). Cam
Resumo do conteúdo contido na página número 7
Make a hole in the ceiling. 5. 40 mm 6. Thread the cables on 5. the ceiling. 7. Mount WB-S684U on the ceiling. (4 locations) 6. CAUTION • Use waterproof material to seal around the mounting surface of WB-S684U. • Use GE silicon or its equivalents as the sealing Bolts (M6~M8) material. or Fall prevention wire hole Anchor Bolts (M8) 7. Making a hole in the ceiling When a hole cannot be made in the ceiling Remove the cap and thread the cables. (Thread the coaxial cable first.) Cables Cap CA
Resumo do conteúdo contido na página número 8
WB-S684U Outdoor Pendant Mount (continued) Install the fall prevention wire on WB-S684U. 8. A Thread the ring section of the fall prevention wire Connection section that was removed in step 4 through the fixing screws fall prevention wire hole of WB-S684U. B Thread the terminal side twice through the ring in A. 11. Thread twice 10. Fall prevention wire 9. Install the fall prevention wire to the camera unit. A Pull the terminal side that was threaded through the ring toward the direction
Resumo do conteúdo contido na página número 9
WB-S685U Ceiling Recessed Bracket (Not for USA and Canada) Notes on Installation ● Check that the installation location is able to withstand the total weight of the camera, which is about 2.9 kg, before you install. If the location is not strong enough, reinforce with a reinforcing board. ● The unit can be installed on ceilings of thickness up to 35 mm. ● Always use anchor bolts to secure WB-S685U. If anchor bolts are unavailable, be sure to use wire rope. ● Conform to the local standards duri
Resumo do conteúdo contido na página número 10
WB-S685U Ceiling Recessed Bracket (Not for USA and Canada) (continued) Front side of camera 5. 7. Cable 5. Connect the cable. Connect the cable to the terminal block of the ceiling attachment fitting. Fall prevention wire Mount the ceiling 6. of the camera attachment fitting on CAUTION WB-S685U. Ensure that the fall prevention (3 locations) wire is secured at the positions shown above. CAUTION Ensure that the cable is not caught in between during installation. 6. Ceiling attachment f
Resumo do conteúdo contido na página número 11
Dismantling the camera 1. Remove the ceiling panel. Release Release lever lever 2. Remove the camera 2. 2. Press Press from WB-S685U. Press the release lever and remove. CAUTION Release lever Always support the camera with the palm of your hand when performing this operation. Press 3. Remove the fall prevention wire. Dismantling WB-S685U 1. Remove the ceiling attachment fitting and the cable. 3. Stopper Remove in the reverse procedure of mounting. Stopper release lever 2. Rotate the fi
Resumo do conteúdo contido na página número 12
Specifications WB-S681U WB-S682U WB-S685U WB-S684U (Not for USA and Canada) Operating Indoor Outdoor temperature Temperature at guaranteed performance: 0 C ~ +40 C Temperature at guaranteed performance: 30 C ~ +40 C Temperature at guaranteed Temperature at guaranteed operation: 10 C ~ +50 C operation: 40 C ~ +50 C Mass (Body) Approx. 1.7 kg Approx. 0.9 kg Approx. 0.8 kg Approx. 1.3 kg Accessories Instructions.................1 Instructions ................ 1 Instructions ...........
Resumo do conteúdo contido na página número 13
● ● ● ● ● 13
Resumo do conteúdo contido na página número 14
● ● ● ● ● ● 14
Resumo do conteúdo contido na página número 15
● ● ● ● 1. 1. 2. 2. (M5 M6) 4. 3. 6. 3. 5. 4. 7. 5. 8. 6. 7. (M4) 9. (M4) ( 8. 15
Resumo do conteúdo contido na página número 16
● ● ● ● M4 6. 1. 2. (M4 M6) 3. 1. 5. 4. (M4) 2. 5. 6. 3. 7. 6. 4. (M4) ( 16
Resumo do conteúdo contido na página número 17
● ● ● ● WB-S684 WB-S684 VN-V686WP TK-S686WP 1. A B C 2. 2. 1. 3. 4. 3. 4. 17
Resumo do conteúdo contido na página número 18
5. 5. 6. 7. 6. (M6 M8) (M8) 7. 18
Resumo do conteúdo contido na página número 19
8. A 4 B A 11. 10. 9. A B 4 10. 11. 2 12. 1 19
Resumo do conteúdo contido na página número 20
● ● ● ● 1. 2. 1. 2. 3. 3. 4. 4. 20
