Resumo do conteúdo contido na página número 1
@n IP Company
AIPTEK PENCAM VOICE
Installation Guide
Resumo do conteúdo contido na página número 2
Contents 1 FCC Statement ECC Statement End User License Agreement 2 7 Contents Checklist System Requirements 8 Specifications Operating Environment 9 10 How to Use Your PenCam VoiceRecorder Switching the Camera on /off 12 Taking a Picture Selecting Functions Voice Recording 13 Voice Play Delete the Last Stored Self Timer 15 Continuous Mode Clearing All the Stored 16 Changing the Picture Resolution How to Download Photo, Video and Audio to PC 17 Start AIPTEK PenCam VoiceRecorder Manager 19 Mode S
Resumo do conteúdo contido na página número 3
@n IP Company FCC Statement This equipment generates and uses radio frequency energy. If not installed and used in accordance with the manufacturer's instructions, it may interfere radio and television reception. This equipment has been tested and certified to comply with the limits of Section 15(J) of FCC Regulations for Class B computing devices. These regulations are designed to provide reasonable protection against interference in a residential installation. However, interference may occur i
Resumo do conteúdo contido na página número 4
End User License Agreement Important - Read Carefully! The AIPTEK End-User License Agreement ("EULA"), a legal agreement between you and AIPTEK, Inc., specifies regulations for using the AIPTEK hardware products, which includes the computer hardware, software, associated media, printed materials, and "online" or electronic documentation. As you are installing, successfully installing, copying, or otherwise using this HARDWARE PRODUCT, you must comply with the EULA. If you do not follow the rules
Resumo do conteúdo contido na página número 5
@n IP Company copies. 2. OTHER RIGHTS AND LIMITATIONS Single Entity User - Only the person that the HARDWARE PRODUCT was purchased for may use the HARDWARE PRODUCT and its accompanying software. Individual User - Only you and those in your immediate household may use the HARDWARE PRODUCT and its accompanying software. Product Transfer - You may permanently transfer all of the HARDWARE PRODUCT under this EULA, provided you retain no copies of any of the software included in this HARDWARE PRODUCT.
Resumo do conteúdo contido na página número 6
PRODUCT, you can seek a refund from the place of purchase. If you cannot get a refund from the place of purchase, you may not seek a refund for the HARDWARE PRODUCT from AIPTEK, and you agree to not attempt to seek a refund for the HARDWARE PRODUCT from AIPTEK. Technical Support - AIPTEK may provide you with Technical Support ("Tech Support") related to the HARDWARE PRODUCT. Use of Tech Support, which includes the Warranty Service, is governed by the AIPTEK policies and programs described in the
Resumo do conteúdo contido na página número 7
@n IP Company PRODUCT (including but not limited to any images, photographs, animations, video, audio, music, text, and "Applets" incorporated into the HARDWARE PRODUCT), the accompanying printed materials, all "online" documentation, any copies of the software included with the HARDWARE PRODUCT, all pieces of physical hardware, all media, and/or other AIPTEK- provided materials, are owned by AIPTEK or its suppliers. The HARDWARE PRODUCT is protected by copyright laws and international treaty pr
Resumo do conteúdo contido na página número 8
(c)(1) and (2) of the Commercial Computer Software Restricted Rights at 48 CFR 52.227-19, as applicable. Manufacturer is AIPTEK, Inc.51 Discovery, Suite 100 Irvine, CA 92618, USA. 7. If you acquired this product in the United States, this EULA is governed by the laws of the State of California. 8. If this product was acquired outside the United States or its Territories, then local law may apply. If you live in Canada, any other nations in Central & South America, including the Falkland Islands,
Resumo do conteúdo contido na página número 9
@n IP Company Contents Checklist 1.PenCam VoiceRecorder 2.Application / One Driver CD Driver & Application 3.Install Quick Guide 4.USB Cable NOTE: If you are missing any of these contents please inform your dealer or your nearest support office so that the contents can be replaced. Install Quick Guide
Resumo do conteúdo contido na página número 10
System Requirements Microsoft WindowsXP/ 98/ ME/ 2000 Pentium 200 MHz (or equivalent) processor or higher 32 MB of RAM (64 MB recommended) Video card with 2 MB of RAM for minimum 16 bit (High Color) display Audio Card (recommended) 4X speed CD-ROM An available USB port Specifications Sensor type: Color VGA(640x480) CMOS image sensor Image Performance for Video Stream: 9 fps for QVGA(320x240 Pixels) 3 fps for VGA(640x480 Pixels) Internal Memory : 64 Mbit SDRAM Images Capacity : 26 Picture for VGA
Resumo do conteúdo contido na página número 11
@n IP Company Operating Environment 41-104 Fahrenheit ; 5-40 Celsius 20% - 85% relative humidity, non-condensing Warning! Never put your camera in water. Disconnect your camera from your computer before cleaning it. Remove dust or stains with a soft cloth dampened with water or neutral detergent. Do not use any volatile chemicals or liquids such as thinner or benzene to clean your camera.. Do not place hot items on the surface of your camera. Do not attempt to disassemble your camera.
Resumo do conteúdo contido na página número 12
How to Use Your PenCam VoiceRecorder Introduction The built-in memory of your camera is 64 Mbit memory. It supports 13-minute voice recording and two kinds of resolution- high resolution ( 640x480 VGA) for 26 pictures and low resolution ( 320x240 QVGA ) for 107 pictures. Besides, your camera offers several functions on the LCD, showing the remaining number of pictures as well. With a USB cable, you can transfer all the pictures and sounds to your PC. Installing Batteries Your camera is powered b
Resumo do conteúdo contido na página número 13
@n IP Company View Finder Lens Speaker Shutter Switch(SW1) USB Port Microphone LCD Display Mode Switch(SW2) Battery Cover
Resumo do conteúdo contido na página número 14
Selecting Functions Your camera has two switches - the shutter switch(SW1) and the mode switch ( Sw2 ). As you keep pressing the mode switch, the LCD indicates " Hr, 26, Ar, Ap, dA, dP, dC, Ct, St, CL, and Lr" icons in order. To select the icon you want, press the shutter switch. Note! If an icon is not selected within 5 seconds, the LCD goes back to the picture remaining number. The following chart shows the function of each icon. High resolution ( 26 images at most ) Picture remaining number V
Resumo do conteúdo contido na página número 15
@n IP Company Switching the camera on / off Keep pressing SW2 until the LCD is activated, and the camera turns off after 30 seconds of inactivity. The LCD indicates "Lr" for low resolution (QVGA images) and "Hr" for high resolution(VGA images). The LCD then displays the LCD number of the remaining pictures. To turn is activated off the camera, press SW2 for 2 seconds. Press Sw2 Taking a picture Press Sw1 to shoot Press the shutter switch to take a picture. A high pitched beep indicates that a pi
Resumo do conteúdo contido na página número 16
Voice playing Press the mode switch until the LCD changes to indicate "Ap". Then press the shutter switch to play recorded sound. Change mode to "AP" "AP" is displayed Press SW1 to play recorded voice Delete the last stored Press the mode switch until the LCD changes to indicate "dP", "dA" or "dC". When pressing the shutter switch, the LCD starts blinking. Press the shutter switch again within 5 seconds and your camera deletes the last stored image, sound or continuous snapshot. Change mode to "
Resumo do conteúdo contido na página número 17
@n IP Company Self Timer Press the mode switch until "St" appears on the LCD. Then press the shutter switch and a 10 second self-timer starts. Every 10 second the camera issues a short beep. When completing the self-timer, a longer beep sounds, which indicates that a picture is taken. Note: The self-timer can't work when the memory of your camera is full. SW1 Change mode to "St" "St" is displayed Press SW1 to initiate the self-timer mode Continuous mode Press the mode switch until "Ct" appears o
Resumo do conteúdo contido na página número 18
Clearing all the stored Press the mode switch until CL appears on the LCD. Press SW1 and after a beep the LCD starts to flash . Press SW1 again within 5 seconds and all the camera memory and the picture counter are cleared. SW1 Change mode to "CL" "CL" is displayed Press SW1 to select clear mode LCD starts to flash Press SW1 to clear the memory Changing the picture resolution Picture resolution may only be changed when the camera memory is empty. If there are any pictures stored in your camera,
Resumo do conteúdo contido na página número 19
@n IP Company How to Download Photo, Video and Audio to PC Thank you for purchasing the AIPTEK PenCam Voice Recorder. This guide will help you install your camera onto your computer system. PenCam Voice Recorder Manager Installation Place the CD into your CD-ROM and click on the PenCam VoiceRecorder Manager Icon to begin the installation.If the CD does not automatically display, simply go to "Start" then "Run" and select the path "D:\Setup.exe". You may need to replace "D" with the letter that c
Resumo do conteúdo contido na página número 20
After the welcome screen appears, click "Next". The CD begins installing the driver to the proper location. The dialog box that appears asks if you would like to restart your computer now or later. Press "OK" to complete installation.
