Resumo do conteúdo contido na página número 1
Ar-M208_sec.book 1 ペー ジ ２ ００２ 年６月 １３日 木曜 日 午 後２時 ３７分
MODEL
AR-M208
DIGITAL MULTIFUNCTIONAL
SYSTEM
OPERATION MANUAL
Page
• GETTING STARTED 5
• MAKING COPIES 23
• SPECIAL FUNCTIONS 47
• COPIER TROUBLE? 71
• GENERAL INFORMATION 85
• OPTIONAL EQUIPMENT 99
CHINA
KS➀
812QSZZ
Resumo do conteúdo contido na página número 2
➢ ➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣ ➢ Ar-M208_sec.book 2 ペー ジ ２ ００２ 年６月 １３日 木曜 日 午 後２時 ３７分 ➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣ FOR YOUR RECORDS ... To protect against loss or theft, record and retain for reference the copier’s serial number located on the back of the unit. Model Number Serial Number Date of Purchase Place of Purchase Authorized Sharp Copier Service Department Number ➢ ➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣ ➢ ➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣➢➣
Resumo do conteúdo contido na página número 3
Ar-M208_sec.book 1 ペー ジ ２ ００２ 年６月 １３日 木曜 日 午 後２時 ３７分 2 OUTLINE OF THIS MANUAL 1. GETTING STARTED This chapter describes the basic information on the use of this copier. 1 2. MAKING COPIES This chapter describes the basic copying functions such as normal copying, reduction or enlargement, and exposure adjustments. 2 3. SPECIAL FUNCTIONS This chapter describes special copying functions including various image editing functions. 3 4. COPIER TROUBLE? This chapter describes how to remove misfed pa
Resumo do conteúdo contido na página número 4
Ar-M208_sec.book 2 ペー ジ ２ ００２ 年６月 １３日 木曜 日 午 後２時 ３７分 CONTENTS Page CHAPTER 1 GETTING STARTED INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 CAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 COPIER INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 MAIN FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 PART
Resumo do conteúdo contido na página número 5
Ar-M208_sec.book 3 ペー ジ ２ ００２ 年６月 １３日 木曜 日 午 後２時 ３７分 CONTENTS Page CHAPTER 4 COPIER TROUBLE? STATUS MESSAGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 MISFEED REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Misfeed in the RSPF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Misfeed in the bypass tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Misfeed in t
Resumo do conteúdo contido na página número 6
Ar-M208_sec.book 4 ペー ジ ２ ００２ 年６月 １３日 木曜 日 午 後２時 ３７分 CONTENTS 4
Resumo do conteúdo contido na página número 7
Ar-M208_sec.book 5 ペー ジ ２ ００２ 年６月 １３日 木曜 日 午 後２時 ３７分 1 CHAPTER 1 GETTING STARTED This chapter describes the basic information on the use of this copier. Page INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 CAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 COPIER INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 MAIN FEATURES . . . . . . . . . . . . . . . . . . .
Resumo do conteúdo contido na página número 8
GETTING STARTED Ar-M208_sec.book 6 ペー ジ ２ ００２ 年６月 １３日 木曜 日 午 後２時 ３７分 INTRODUCTION This copier has been designed to provide convenient copying features in a minimum amount of office space and with maximum operational ease. To get full use of all copier features, be sure to familiarize yourself with this manual and the copier. For quick reference during copier use, keep this manual in a handy location. About the operation manuals The operation manuals for the unit are as follows: Operation Ma
Resumo do conteúdo contido na página número 9
GETTING STARTED Ar-M208_sec.book 7 ペー ジ ２ ００２ 年６月 １３日 木曜 日 午 後２時 ３７分 CAUTIONS Follow the cautions below when using this copier. WARNING: The fusing area is hot. Exercise care in this area when removing misfed paper. 1 Do not look directly at the light source. Doing so may damage your eyes. CAUTION: The socket-outlet should be installed near the equipment and shall be easily accessible. Place the copier on a firm, level surface. Do not install the copier in a humid or dusty loc
Resumo do conteúdo contido na página número 10
GETTING STARTED Ar-M208_sec.book 8 ペー ジ ２ ００２ 年６月 １３日 木曜 日 午 後２時 ３７分 COPIER INSTALLATION Improper installation may damage the copier. Please note the following during initial installation and whenever the copier is moved. CAUTION: If the copier is moved from a cool place to a warm place, condensation may form inside the copier. Operation in this condition will cause poor copy quality and malfunctions. Leave the copier at room temperature for at least 2 hours before use. Do not install yo
Resumo do conteúdo contido na página número 11
GETTING STARTED Ar-M208_sec.book 9 ペー ジ ２ ００２ 年６月 １３日 木曜 日 午 後２時 ３７分 COPIER INSTALLATION Be sure to connect the power cord only to a power outlet that meets the specified voltage and current requirements (See page 97.). Also make certain the outlet is properly grounded. NOTE: Connect the copier to a power outlet which is not used for other electric appliances. If a lighting 1 fixture is connected to the same outlet, the light may flicker. Be sure to allow the required space around the mac
Resumo do conteúdo contido na página número 12
GETTING STARTED Ar-M208_sec.book 10 ページ ２００ ２年６ 月１３ 日 木 曜日 午後２ 時３７ 分 MAIN FEATURES High-speed laser copying 1 First-copy time at 600 dpi is only 4.8 seconds (except when recovering from a power save mode or immediately after power on). Copying speed is 20 copies/min. at 600 dpi, which lends itself for business use, providing improvement in working efficiency. High-quality digital image 2 High-quality copying at 600 dpi is performed. In addition to the automatic exposure mode, the
Resumo do conteúdo contido na página número 13
GETTING STARTED Ar-M208_sec.book 11 ページ ２００ ２年６ 月１３ 日 木 曜日 午後２ 時３７ 分 MAIN FEATURES Scan once/ Print many 4 The copier is equipped with a memory buffer allowing the copier to scan an original once and make up to 999 copies of the scanned image. This improves workflow, reduces operating noise from the copier and reduces wear and tear on the scanning mechanism, which provides for a higher reliability. 1 Printer features 5 This copier can be used as a network laser printer. Optional features
Resumo do conteúdo contido na página número 14
GETTING STARTED Ar-M208_sec.book 12 ページ ２００ ２年６ 月１３ 日 木 曜日 午後２ 時３７ 分 PART NAMES AND FUNCTIONS Exterior Document feeder tray (p. 26) Dehumidification heater switch (p. 16) Hold up to 40 originals. Press to turn on the heater to prevent dew condensation inside the copier and moisture Original guides absorption of paper. Ajust to the size of the originals. Operation panel (p. 14) Right side cover (p. 74) All copier controls are located here for easy Open to remove misfed originals. operation. Fe
Resumo do conteúdo contido na página número 15
GETTING STARTED Ar-M208_sec.book 13 ページ ２００ ２年６ 月１３ 日 木 曜日 午後２ 時３７ 分 PART NAMES AND FUNCTIONS Interior 1 Bypass tray paper guides (p. 42) Fusing unit release levers (p. 78) Adjust to the width of the copy paper. Lower to remove misfed paper. WARNING: Bypass tray (p. 41) The fusing unit is hot. Take care in Paper including special paper (such as removing paper. transparency film) can be fed from the bypass tray. Paper guide (p. 79) Open to remove misfed paper. Bypass tray extension (p. 41) Pu
Resumo do conteúdo contido na página número 16
GETTING STARTED Ar-M208_sec.book 14 ページ ２００ ２年６ 月１３ 日 木 曜日 午後２ 時３７ 分 PART NAMES AND FUNCTIONS Operation panel COPY key and indicator (p. 84, 92) Copy quantity display Press to select the COPY mode. Displays the specified copy quantity during Press and hold during standby or during warm- standby and displays the copy countdown as up to display the total output count and the copies are made. quantity of toner remaining. Numeric keys Mode keys and indicators Use to select the desired copy quanti
Resumo do conteúdo contido na página número 17
GETTING STARTED Ar-M208_sec.book 15 ページ ２００ ２年６ 月１３ 日 木 曜日 午後２ 時３７ 分 PART NAMES AND FUNCTIONS 1 Ready to copy. 1 / 8 2 11 AUTO 100% 100% 1 / AUTO 8 2 11 AUTO IMAGE key (p. 37) PROGRAM/READ-END key (p. 50, 67) Press for automatic copy ratio selection. Press to select the job memory mode. Press to finish scanning of originals and to start 2-SIDED COPY key (p. 28) copying when copying in the sort, group or Press to select the 1-sided to 1-sided, 1-sided to staple sort mode from the platen glass.
Resumo do conteúdo contido na página número 18
GETTING STARTED Ar-M208_sec.book 16 ページ ２００ ２年６ 月１３ 日 木 曜日 午後２ 時３７ 分 POWER ON AND OFF The power switch is located on the left side of the copier. Power on Turn the power switch to the "ON" position. Power on Power off When the power switch is turned to the "ON" position, the message "System check." will appear in the message display and warm-up will start. During warm-up, you can select your desired job settings and then by pressing the START ( ) key, your job will commence when the copier
Resumo do conteúdo contido na página número 19
GETTING STARTED Ar-M208_sec.book 17 ページ ２００ ２年６ 月１３ 日 木 曜日 午後２ 時３７ 分 POWER ON AND OFF Initial settings The copier assumes the initial settings when it is first turned on, when the CLEAR ALL (CA) key is pressed, or a preset time (auto clear time) after the last copy is made in any mode. The initial settings that appear in the display are shown below. 1 Ready to copy. 1 / 8 2 11 AUTO 100% 100% 1 / AUTO 8 2 11 Copy ratio: 100% Exposure: Automatic Auto paper selection: On Paper feed stati
Resumo do conteúdo contido na página número 20
GETTING STARTED Ar-M208_sec.book 18 ページ ２００ ２年６ 月１３ 日 木 曜日 午後２ 時３７ 分 FUNCTION ICONS The following function icons will be indicated on the setting screen of each copier function. 2-sided copy mode: Erase: One-sided to two-sided Edge erase copying Two-sided to two-sided Center erase copying Two-sided to one-sided copying Edge + Center erase Output mode: Dual page copy: Sort mode Staple sort mode B/W reverse: Group mode Margin shift: Right Down Left 2 in 1 / 4 in 1: 2 in 1 4 in 1 18
