Resumo do conteúdo contido na página número 1
CL29Z7H/CL29Z6H
CL32Z7H/CL32Z6H
CL34Z7H/CL34Z6H
COLOR TELEVISION
.............
Owner’s
Instructions
AA68-02816A-00(ENG)
...........................................................................................................................
Resumo do conteúdo contido na página número 2
Warning! Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product
Resumo do conteúdo contido na página número 3
Thank You for Choosing Samsung Thank you for choosing Samsung! Your new Samsung TV represents the latest in television technology. We designed it with easy-to-use on-screen menus and closed captioning capabili- ties, making it one of the best products in its class. We are proud to offer you a product that will provide convenient, dependable service and enjoyment for years to come. Important Safety Information Always be careful when using your TV receiver. To reduce the risk of fire, electrical
Resumo do conteúdo contido na página número 4
• Protect the power cord. Power supply cords should be routed so that they won’t be walked on or pinched by objects placed on or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit. • Unplug the TV from the wall outlet and disconnect the antenna or cable system during a lightning storm or when left unattended and unused for long periods of time. This will pre- vent damage to the unit due to lightning and power-line surges
Resumo do conteúdo contido na página número 5
CONTENTS Chapter 1: Your New TV . . . . . . . . . . . . . . .1.1 List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 Familiarizing Yourself with The TV. . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 Front Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 Side Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3 Rear Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumo do conteúdo contido na página número 6
CONTENTS Chapter 4: Special Features . . . . . . . . . . . . 4.1 Customizing Your Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1 Setting Up Your Remote Control to Operate Your VCR (or DVD) . 4.1 Setting Up Your Remote Control to Operate Your Cable Box . . . . 4.3 Fine Tuning Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.4 LNA (Low Noise Amplifier) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5 Tilt . . . . . . . . . .
Resumo do conteúdo contido na página número 7
Chapter One YOUR NEW TV List of Features Your TV was designed with the latest technology. This TV is a high-performance unit that includes the following special features: • Full Flat Screen • Easy-to-use remote control • Easy-to-use on-screen menu system • Automatic timer to turn the TV on and off • Adjustable picture and sound settings that can be stored in the TV’s memory • Automatic channel tuning for up to 181 channels • A special filter to reduce or eliminate reception problems • Fine tuni
Resumo do conteúdo contido na página número 8
YOUR NEW TV Familiarizing Yourself with The TV Front Panel Buttons The buttons on the front panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. Œ TV/VIDEO ˆ STANDBY indicator Press to change between viewing TV programs Lights up when you turn the power off. and signals from other components. Remote Control Sensor ´ MENU Aim the remote control towards this spot on the Press to see an on-screen menu of your TV's
Resumo do conteúdo contido na página número 9
YOUR NEW TV Side Panel Jacks You can use the side panel jacks to connect an A/V component that is used only occa- sionally, such as a camcorder or video game. (For information on connecting equipment, see pages 2.1 – 2.8.) Œ AUDIO INPUT jacks ˇ SUPER VIDEO INPUT jack Used to connect the audio S-Video signal from an S-VHS VCR or DVD signals from a camcorder or video game. player. Note: In S-Video mode, Audio Output depends ´ VIDEO INPUT jack what kind of audio input source is connected to Used t
Resumo do conteúdo contido na página número 10
YOUR NEW TV Rear Panel Jacks Use the rear panel jacks to connect an A/V component that will be connected continuously, such as a VCR or a DVD player. Because there are two sets of input jacks, you can connect two different A/V components (i.e., a VCR and a DVD, 2 VCRs, etc.) For more information on connecting equipment, see pages 2.1 – 2.8. Œ AUDIO-VIDEO MONITOR Ø COMPONENT 2 INPUT jacks OUTPUT jacks (480i/480p/1080i) Connect to the audio/video input jacks of a Connect to the audio and compon
Resumo do conteúdo contido na página número 11
YOUR NEW TV Remote Control You can use the remote control up to about 23 feet from the TV. When using the remote, always point it directly at the TV. You can also use your remote control to operate your VCR and cable box. See page 4.1 for details. Œ Power ˝ MODE Turns the TV on and off. Selects a target device to be con- trolled by the Samsung remote ´ Number buttons control (i.e., TV, VCR, Cable box, or Press to select channels directly DVD). on the TV. Ô Pre-CH +100 Tunes to the previous chan
Resumo do conteúdo contido na página número 12
YOUR NEW TV Remote Control ¯ Reset ˛ DNIe If your remote control is not func- Activates DNIe (Digital Natural tioning properly, take out the bat- Image engine). teries and press the reset button for about 2~3 seconds. Re-insert ◊ Set the batteries and try using the Use this button when you are set- remote control again. ting up your remote control to operate your VCR, Cable box, or ˘ Display DVD). Press to see the time, channel, etc., on-screen. Also press to exit ± R.surf (quit) the menu syst
Resumo do conteúdo contido na página número 13
2 Chapter Two INSTALLATION Connecting VHF and UHF Antennas If your antenna has a set of leads that look like this, see “Antennas with 300-ohm Flat Twin Leads,” below. If your antenna has one lead that looks like this, see “Antennas with 75-ohm Round Leads,” on page 2.2. If you have two antennas, see “Separate VHF and UHF Antennas,” on page 2.2. Antennas with 300-ohm Flat Twin Leads If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has 300-ohm twin flat lea
Resumo do conteúdo contido na página número 14
INSTALLATION Antennas with 75-ohm Round Leads 1 Plug the antenna lead into the VHF/UHF terminal on the bottom of the back panel. Separate VHF and UHF Antennas If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops). 1 Connect both antenna leads to the combiner. 2 Plug the combiner into the VHF/UHF ter- minal
Resumo do conteúdo contido na página número 15
INSTALLATION Connecting to a Cable Box that Descrambles All Channels This terminal might be labeled 1 “ANT OUT,” “VHF OUT,” or simply, Find the cable that is con- “OUT.” nected to the ANTENNA OUT terminal on your cable box. 2 Connect the other end of this cable to the VHF/UHF antenna terminal on the back of the TV. Connecting to a Cable Box that Descrambles Some Channels If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need
Resumo do conteúdo contido na página número 16
INSTALLATION 4 Connect a coaxial cable between the ANTENNA OUT terminal on the cable box and the B–IN terminal on the A/B switch. 5 Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch. 6 Connect the last coaxial cable between the OUT terminal on the RF (A/B) switch and the VHF/UHF terminal on the rear of the TV. After you’ve made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B”
Resumo do conteúdo contido na página número 17
INSTALLATION Connecting a VCR These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 2.1-2.3). Skip step 1 if you have not yet connected to an antenna or a cable system. 1 Unplug the cable or antenna from the back of the TV. 2 Connect the cable or antenna to the ANTENNA IN terminal on the back of the VCR. 3 Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV
Resumo do conteúdo contido na página número 18
INSTALLATION Connecting an S-VHS VCR Your TV can be connected to an S-Video signal from an S-VHS VCR. (This connection delivers a better picture as compared to a standard VHS VCR.) 1 To begin, follow steps 1–3 in the previous section to connect the antenna or cable to your VCR and your TV. 2 Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the AUDIO INPUT 1 jacks on the TV. Make sure the jacks you are using are underneath the number “1.” 3 Connect an S-video cable betw
Resumo do conteúdo contido na página número 19
INSTALLATION Connecting a Second VCR to Record from the TV Your TV can send out signals of its picture and sound to be recorded by a second VCR. To do this, connect your second VCR as follows: 1 Connect a set of audio cables between the AUDIO OUT jacks on the TV and the AUDIO IN jacks on the VCR. (The VCR input jacks might be either on the front or on back of the VCR.) 2 Connect a video cable between the VIDEO OUT jack on the TV and the VIDEO IN jack on the VCR. Refer to your VCR’s instructions
Resumo do conteúdo contido na página número 20
INSTALLATION Connecting a Digital TV Set-Top Box (480p/1080i) Connect the Y, PB, and PR video outputs of the set-top box to their corresponding inputs on the TV. Next, connect the Left and Right audio from the set-top box to the corre- sponding L and R terminals on the TV. (The connections for a typical set-top box are shown below.) 1 Connect a coaxial cable between the ANTENNA OUT terminal on the Set Top Box and the antenna terminal on the TV. 2 Connect a set of audio cables between the AV-3
