Resumo do conteúdo contido na página número 1
c
1976, 2001 Sanrio Co., Ltd.
13” COLOR TV WITH
REMOTE CONTROL
TV/CATV MODE SELECTION
When shipped from the factory , the TV/CATV menu option is set to
the "CATV"(Cable Television ) mode.
If not using CATV, set this menu option to the "Air" position.
OWNER’S MANUAL
HKTV13
Resumo do conteúdo contido na página número 2
Welcome to the world of the Hello Kitty. My friends at Emerson Radio Corp. are producing this Hello Kitty Color TV under license from Sanrio Company Ltd. Read this manual before operating this unit to become familiar with its features and obtain the performance that will bring you continued enjoyment for many years. In the event you require technical assistance, please call my friends at the Emerson Radio Consumer Affairs Department at: 800-898-9020. For future reference, record the serial numb
Resumo do conteúdo contido na página número 3
CONTENTS Table of Contents Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Chapter 1: Overview of Your Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Your TV's Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Your TV's Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resumo do conteúdo contido na página número 4
SAFETY IMPORTANT SAFEGUARDS PLEASE READ ALL THESE INSTRUCTIONS REGARDING YOUR TELEVISION EQUIPMENT AND RETAIN FOR FUTURE REFERENCE. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE TV RECEIVER. 1 Read all of these instructions. 7 Slots and openings in the cabinet and the back or bottom are provided for ventilation and to 2 Save these instructions for later use. ensure reliable operation of the television 3 Unplug this television equipment from the wall equipment; and to protect it from overhea
Resumo do conteúdo contido na página número 5
13 An outside antenna system should not be locat- (f) When the television equipment exhibits a ed in the vicinity of overhead power lines or distinct change in performance - this indi- other electric light or power circuits, or where it cates a need for service. can fall into such power lines or circuits. When 18 When replacement parts are required, be sure installing an outside antenna system, extreme the service technician has used replacement care should be taken to keep from touching such pa
Resumo do conteúdo contido na página número 6
CHAPTER 1 Overview of Your Equipment Your TV comes with a remote control. The section below summarizes the buttons, controls, and ter- minals that you will use with your TV. Your TV's Front Panel MENU STAND-BY CH VOL VIDEO AUDIO EAR PHONE POWER 12 3 45 6 7 8 9 1 POWER Use this button to turn your TV on or off. 2 W WCHV V Use these buttons to change channels on your TV, or to select items in the menu system. 3 C CVOLB B Use these buttons to change your TV's volume, to activate selections in the m
Resumo do conteúdo contido na página número 7
Your TV's Back Panel ANT VIDEO AUDIO 1 2 3 1 Antenna terminal(ANT) Use this terminal to attach an antenna or cable system to your TV. 2 VIDEO IN JACK This terminal allows the TV to receive a video signal from another component, such as a VCR. 3 AUDIO IN JACK This terminal allows the TV to receive an audio signal from another component, such as a VCR. NOTE VIDEO IN and AUDIO IN on back panel are disconnected when VIDEO IN/AUDIO IN on front panel is connected. Chapter 1 : Overview of Your Equipmen
Resumo do conteúdo contido na página número 8
Your Remote Controls 1. POWER 7. INPUT Use this button to turn your TV on or off. Use this button to select TV or VIDEO mode. 2. MUTE 8. VIDEO Use to turn the TV's sound on and off. Use this button to display video adjustment items. 3. V VCHW W 9. 0-9 Use these buttons to change channels on Use these buttons to change channels. your TV, or select items in the menu system. 10. SLEEP 4. C CVOLB B Use this button to program the TV to turn off Use these buttons to change your TV's after a certa
Resumo do conteúdo contido na página número 9
Installing your remote control batteries 1 Open the battery compartment on the back of the remote control. 2 Install two AA-size batteries (not included) as shown. Make sure the “+” and “-” terminals are oriented correctly. 3 Replace the cover. Notes Do not mix different types of batteries, or mix an old and a new battery. Remove and replace weak batteries. Weak batteries can leak and damage your controller. Dispose of batteries properly; never throw them into a fire. Point your remote at the re
Resumo do conteúdo contido na página número 10
CHAPTER 2 Connecting an Antenna or Cable to Your TV Connecting Rod Antenna (included) Install Rod Antenna on top rear of cabinet and connect other end to the antenna terminal. Your TV will provide you with the best performance if you connect it to an external antenna or cable sys- tem. Follow the directions below make this connection. Please note that you will normally only have to make one of the connections shown below, not all of th
Resumo do conteúdo contido na página número 11
Antennas with two sets of leads You might have two sets of leads from your antenna system, especially if you have one antenna for VHF signals and one antenna for UHF signals. If your antenna system has both a coaxial lead and twin 300-ohm leads, you must obtain a com- biner (available at your local electronics store). Press or screw the coaxial lead onto the combiner; place the twin leads underneath the screws on the combiner and tighten the screws. Press the cable from com- biner onto the anten
Resumo do conteúdo contido na página número 12
If your cable system requires you to use a converter box for all channels, connect the incoming cable to the IN terminal on the converter box. Connect another cable between the OUT terminal on the converter box and the antenna terminal on the TV. You will need to keep your TV tuned to channel 3 or 4 and change channels using the converter box. If your cable system only requires you to use a converter box for some channels (i. e. pay-TV channels),follow these steps: Find the primary incoming coax
Resumo do conteúdo contido na página número 13
CHAPTER 3 Operating Your TV Once you have connected your TV to an antenna or cable system, plugged the TV in, and put batter- ies in the remote, you are ready to use the TV. The first thing you should do is program your TV so it memorizes all of available channels. Turning Your TV On 1 To turn your TV on, press the POWER button on the remote control. You can also use the POWER button on the front panel. Make sure your TV is plugged in before you try to turn it on. Programming Your TV's Channel M
Resumo do conteúdo contido na página número 14
Changing Channels You can change channels in three ways: 1 The VCHW buttons will take you through all memorized channels, 1 one by one. The VCHW buttons will not access channels that have not been programmed into the TV's memory. For more information 2 about programming channels into memory, see the section “Programming your TV's Channel Memory” on the previous page. 3 2 The number buttons (0-9) will take you to any channel, even if it has not been memorized. To change to a channel, enter its nu
Resumo do conteúdo contido na página número 15
Changing the TV's Channel Memory Your TV's memory determines the channels that are available using the VCHW buttons. You can add channels to this memory or remove them from memory. If a channel is removed from memory, you can tune to it with the number buttons, but you cannot tune to it with the VCHW buttons. If just one channel is memorized, the Add/Delete Channels function will search the whole channels. But if two or more channels are memorized, the Add/Delete Channels function will search th
Resumo do conteúdo contido na página número 16
Changing the TV's Input Normally, your TV displays the signal coming through the antenna terminal. However, If you’ve connected another component to your TV(such as a VCR) using the Video/Audio input, you will want to be able to view the signal from the component. To do this, you will need to switch from the ‘TV’ input to the ‘ Line ‘ Input. Simply press "INPUT" button on remote control. Or follow steps as below. 1 On "MENU" mode, select "SETUP" and enter "Set-Up" menu. 2 Use the VCHW buttons to
Resumo do conteúdo contido na página número 17
Adjusting Video Settings You may wish to adjust the video settings (e. g. contrast or color) to obtain the most pleasing pic- ture. To do so, follow these directions: 1 On "MENU" mode, select "VIDEO" and enter "Video" menu for picture controls. 2 The “Settings” item will be selected. Use the CVOLB buttons to turn Settings to Preset or Custom. 3 Use the VCHW buttons to select the video setting you wish to adjust. Descriptions of the video settings are on the next page. 4 Use the CVOLB buttons to
Resumo do conteúdo contido na página número 18
Returning to the factory settings If you would like to return to the original video settings, as they were calibrated at the factory, fol- low these steps : 1 On "MENU" mode, select "VIDEO" and enter "Video" menu for picture controls. 2 Press the CVOLB buttons to set the “Settings” to ‘Preset’. The TV will remember the ‘Custom’ settings you had previously chosen. When you set “Settings” to ‘Custom’ again, your previous custom settings will be restored. 1 2 Video Video Settings :
Resumo do conteúdo contido na página número 19
CHAPTER 4 Using Timer Functions Your TV has a built in-clock, and you can set the TV to turn on and off at times that you select. You can also set your TV to turn off after counting down a certain amount of time. Setting the Clock 1 On "MENU" mode, select "TIME" and enter "Time" menu. 2 The “Set Clock” item will be selected. Press the CVOLB buttons to set the clock. If you hold down either CVOL or VOLB button, the corresponding numbers will change more quickly. 3 When the clock is set correctly,
Resumo do conteúdo contido na página número 20
Setting the Off Time If you enter a time in the “Off time” setting, your TV will automatically turn off at that time. Follow these instructions to set the “Off time”. 1 On "MENU" mode, select "TIME" and enter "Time" menu. 2 Use the VCHW buttons to select “Off time” item. 3 If you hold down either CVOL or VOLB button, the corresponding numbers will change more quickly. 4 When the setting is correct, use the VCHW buttons to select another “Time” function, or press the MENU button to return to norm
