Resumo do conteúdo contido na página número 1
T X - N 2 6 6 8 W H
C O L O R T E L E V I S I O N
Owner’s
Instructions
Resumo do conteúdo contido na página número 2
Important Warranty Information Regarding Television Format Viewing Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are pri- marily designed to view standard format full-motion video. The images displayed on them should primarily be in the standard 4:3 ratio format and constantly moving. Displaying station- a ry graphics and images on screen, such as the dark top and bottom letterbox bars (wide s c reen pictures), should be limited to no more than 15% of t
Resumo do conteúdo contido na página número 3
C O N T E N T S Chapter 1: Your New TV . . . . . . . . . . . . . . . . 5 List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Familiarizing Yourself with The TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Front Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Side Panel Jacks . . . . . . . . . .
Resumo do conteúdo contido na página número 4
C O N T E N T S Chapter 3: Operation (Cont.) . . . . . . . . . . . . 3 7 Customizing the Sound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Using Automatic Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Viewing an External Signal Source . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Setting the Signal Source. . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Assigning Names to External input mode . . . . . . . . . . . . .
Resumo do conteúdo contido na página número 5
Y O U R N E W T V Chapter One Y O U R N E W T V List of Features Your TV was designed with the latest technology. This TV is a high-performance unit that includes the following special features: • Full Flat Screen • Automatic timer to turn the TV on and off • Adjustable picture and sound settings that can be stored in the TV’s memory • Automatic channel tuning for up to 181 channels • A special filter to reduce or eliminate reception problems • A built-in multi-channel sound decoder for stereo a
Resumo do conteúdo contido na página número 6
Y O U R N E W T V Familiarizing Yourself with The TV F ront Panel Buttons The buttons on the front panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. Î T V / V I D E O ö Remote Control Sensor Press to change between viewing TV programs Aim the remote control towards this spot on the and signals from other components. TV. « M E N U ¯ TIMER indicator Press to see an on-screen menu of your TV's When the TV is tur
Resumo do conteúdo contido na página número 7
Y O U R N E W T V Side Panel Jacks You can use the side panel jacks to connect an A/V component that is used only occa- sionally, such as a camcorder or video game. (For information on connecting equipment, see page 20.) Î A U D I O INPUT jacks ÿ SUPER VIDEO INPUT jack Used to connect the audio signals from a cam- S-Video signal from an S-VHS VCR or DVD corder or video game. player. Note: In S-Video mode, Audio Output depends « VIDEO INPUT jack what kind of audio input source is connected to Us
Resumo do conteúdo contido na página número 8
Y O U R N E W T V Rear Panel Jacks Use the rear panel jacks to connect an A/V component that will be connected continuously, such as a VCR or a DVD player. Because there are three sets of input jacks, you can connect three different A/V components (i.e., a VCR and a DVD, 2 VCRs, etc.) For more information on connecting equipment, see pages 11 – 19. Note: In S-Video mode, Audio Output depends Î AUDIO-VIDEO MONITOR OUTPUT jacks what kind of audio input source is connected to These audio-video s
Resumo do conteúdo contido na página número 9
Y O U R N E W T V Remote Contr o l You can use the remote control up to about 23 feet from the TV. When using the remote, always point it directly at the TV. You can also use your remote control to operate your Set-Top Box, VCR, DVD and cable box. See page 63 for details. Î P O W E R ï M O D E Turns the TV on and off. Selects a target device to be con- trolled by the Samsung remote « S . M O D E control (i.e., TV, Set Top Box, VCR, Adjust the TV sound by selecting Cable box, or DVD). one of the
Resumo do conteúdo contido na página número 10
Y O U R N E W T V Remote Contro l À T V / C O M P O N E N T × S T I L L Press to switch the TV, COMPO- Press to stop the action during a NENT1, or 2 mode particular scene. Press again to resume normal video. ü VCR(DVD, DVR Note: The still function doesn’t or STB) Contro l s operate in Component 1, or 2 mode. REW (Rewind) Press to rewind a tape in your ± R E S E T VCR(DVD, DVR or STB). If your remote control is not func- tioning properly, take out the bat- S T O P teries and press the reset but
Resumo do conteúdo contido na página número 11
I N S TA L L AT I O N Chapter Tw o I N S TA L L AT I O N Connecting VHF and UHF Antennas If your antenna has a set of leads that look like this, see “Antennas with 300-ohm Flat Twin Leads” below. If your antenna has one lead that looks like this, see “Antennas with 75-ohm Round Leads” on next page. If you have two antennas, see “Separate VHF and UHF Antennas” on next page. Antennas with 300-ohm Flat Twin Leads If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) th
Resumo do conteúdo contido na página número 12
I N S TA L L AT I O N Antennas with 75-ohm Round Leads 1 Plug the antenna lead into the VHF/UHF terminal on the bottom of the back panel. Separate VHF and UHF Antennas If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops). 1 Connect both antenna leads to the combiner. 2 Plug the combiner into the VHF/UHF ter
Resumo do conteúdo contido na página número 13
I N S TA L L AT I O N Connecting to a Cable Box that Descrambles All Channels This terminal might be labeled 1 “ANT OUT”, “VHF OUT” or simply, Find the cable that is con- “OUT”. nected to the ANTENNA OUT terminal on your cable box. 2 Connect the other end of this cable to the VHF/UHF antenna terminal on the back of the TV. Connecting to a Cable Box that Descrambles Some Channels If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will
Resumo do conteúdo contido na página número 14
I N S TA L L AT I O N 4 Connect a coaxial cable between the ANTENNA Incoming OUT terminal on the cable Cable box and the B–IN terminal Splitter RF (A/B) on the RF(A/B) switch. Switch Cable Box 5 Connect another cable between the other OUT terminal on the splitter Incoming Cable and the A–IN terminal on Splitter RF (A/B) the RF (A/B) switch. Switch Cable Box 6 Connect the last coaxial cable between the OUT terminal on the RF (A/B) Incoming Cable switch and the VHF/UHF Splitter RF (A/B) TV Rear t
Resumo do conteúdo contido na página número 15
I N S TA L L AT I O N Connecting a VCR These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 11-14). Skip step 1 if you have not yet connected to an antenna or a cable system. 1 Unplug the cable or antenna from the back of the TV. 2 VCR Rear Panel Connect the cable or antenna to the ANTENNA IN terminal Incoming Cable or on the back of the VCR. Antenna 3 VCR Rear Panel TV Rear Panel Connect a coaxial cable be
Resumo do conteúdo contido na página número 16
I N S TA L L AT I O N Connecting an S-VHS VCR Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This connection delivers a better picture as compared to a standard VHS VCR.) 1 VCR Rear Panel TV Rear Panel To begin, follow steps 1–3 in the previous section to connect the antenna or cable to your VCR and your TV. Coaxial Cable 2 TV Rear Panel VCR Rear Panel Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the 1 AUDIO INPUT jacks on the TV. Audio
Resumo do conteúdo contido na página número 17
I N S TA L L AT I O N Connecting a Second VCR to Record from the TV Your TV can send out signals of its picture and sound to be recorded by a second VCR. To do this, connect your second VCR as follows: 1 TV Rear Panel VCR Input Panel Connect a set of audio cables between the AUDIO OUT jacks on the TV and the AUDIO IN Audio Cable jacks on the VCR. (The VCR input jacks might be either on the front or on back of the VCR.) 2 TV Rear Panel VCR Input Panel Connect a video cable between the VIDEO OUT V
Resumo do conteúdo contido na página número 18
I N S TA L L AT I O N Connecting a DVD Player (480i) The rear panel jacks on your TV make it easy to connect a DVD player to your TV. 1 DVD Player Rear Panel TV Rear Panel Connect a set of audio cables between the COMPONENT INPUT 1 (L, R) or COMPONENT Audio Cable INPUT 2 (L, R) jacks on the TV and the AUDIO OUT jacks on the DVD player. 2 DVD Player Rear Panel TV Rear Panel Connect a video cable between the COMPO- Video Cable NENT INPUT 1 (Y, PB, PR) or COMPONENT INPUT 2 (Y, PB, PR) jacks on the
Resumo do conteúdo contido na página número 19
I N S TA L L AT I O N Connecting a Digital TV Set-Top Box (480p/1080i) Connecting to Y , PB , PR Connect the Y, PB, and PR video outputs of the set-top box to their corresponding inputs on the TV. Next, connect the Left and Right audio from the set-top box to the corre- sponding L and R terminals on the TV. (The connections for a typical set-top box are shown below.) 1 Set Top Box Rear Panel TV Rear Panel Connect a coaxial cable between the ANTENNA OUT terminal on the Set Top Box and the antenn
Resumo do conteúdo contido na página número 20
I N S TA L L AT I O N Connecting a Camcorder The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR. (Also see “Viewing an External Signal Source” on page 39). 1 Locate the A/V output jacks on the camcorder. Camcorder Output Jacks They are usually found on the side or back of the camcorder. 2 TV Side Panel Camcorder Output Jacks Connect an audio cable between the AUDIO OUTPUT jack on the Audio Cable Y-Connect
