Resumo do conteúdo contido na página número 1
4-088-152-11 (1)
Trinitron Color TV
GB
Operating Instructions
• Before operating the unit, please read this manual thoroughly and retain
it for future reference.
KV-XJ29
M80
M50
© 2002 Sony Corporation
Resumo do conteúdo contido na página número 2
WARNING • Dangerously high voltages are present inside the TV. • Operate the TV only between 110 - 240 V AC. For your own safety, do not touch any part of the For children’s safety, do not leave children alone TV, the power cord and the antenna cable during with the TV. Do not allow children to climb onto lightning storms. it. Do not operate the TV if any liquid or solid object To prevent fire or shock hazard, do not expose falls into it. Have it checked immediately by the TV to rain or moistu
Resumo do conteúdo contido na página número 3
Using Your New TV Table of Contents Using Your New TV Getting Started ............................................................................................. 4 Step 1: Connect the antenna ................................................................. 4 Step 2: Insert the batteries into the remote ......................................... 5 Step 3: Preset the channels automatically........................................... 5 Connecting optional components ............................
Resumo do conteúdo contido na página número 4
Using Your New TV Getting Started Step 1 Connect the antenna If you wish to connect a VCR, see the Connecting a VCR diagram below. Rear of TV or Antenna cable (not supplied) IEC connector (not supplied) Antenna cable (not supplied) : Signal flow Connecting a VCR To watch the video input, press t (see page 13). Rear of TV Antenna cable (not supplied) To antenna output VCR R L Y CB CR To 8 (antenna input) AUDIO VIDEO R L VIDEO IN VIDEO OUT To video and (yellow) audio outputs To t 1 or 2 -L (MONO
Resumo do conteúdo contido na página número 5
Using Your New TV Notes • If you connect a monaural VCR, connect the yellow plug to (the yellow jack) and the black plug to -L (MONO) (the white jack). • If you connect a VCR to the 8 (antenna input) terminal, preset the signal output from the VCR to the program number 0 on the TV. • Do not connect video equipment to the t 2 (video input) jacks at the front and the rear of your TV at the same time; otherwise the picture will not be displayed properly on the screen. • When no signal is input f
Resumo do conteúdo contido na página número 6
Connecting optional components You can connect optional audio/video components, such as a VCR, multi disc player, camcorder, video game or stereo system. To watch the video input of the connected equipment, press t (see page 13). Connecting a camcorder/video game equipment using the t (video input) jacks Front of TV Audio/Video cable (not supplied) To video and To t 2 audio outputs (video input) Camcorder or (MONO) Video game equipment 2 : Signal flow Notes • You can also connect video equipment
Resumo do conteúdo contido na página número 7
Using Your New TV Connecting a DVD player using the (component video input) jacks 1 Connect R and L under (component video input) on your TV to the LINE OUT, AUDIO R and L output connectors on your DVD player. 2 Using a component video cable, connect Y, CB, and CR under (component video input) on your TV to the COMPONENT VIDEO OUT Y, CB, and CR output connectors on your DVD player. Rear of TV DVD player R L Y CB CR COMPONENT VIDEO OUT S VIDEO OUT LINE OUT CR CB Y R-AUDIO-L VIDEO To L (white
Resumo do conteúdo contido na página número 8
Securing the TV To prevent the TV from falling, secure the TV using one of the following methods: With the supplied screws, attach the band to the TV stand and to the rear of A the TV using the provided hole. or Put the cord or chain through the clamps to secure the TV against a wall or B pillar. 20 mm 3.8mm A B or Note • Use only the supplied screws. Use of other screws may damage the TV. 8 Using Your New TV
Resumo do conteúdo contido na página número 9
Using Your New TV Presetting channels ?/1 You can preset up to 100 TV channels in 1 2 3 numerical sequence from program 4 5 6 Number buttons number 1 using the remote and the buttons on your TV as well. 7 8 9 -/-- JUMP 0 SOUND PROGR 2 +/– MODE PROGR +/– SELECT PIC MODE FAVORITE + or – AUTO PROGR TV Presetting channels automatically Press ! to turn on the TV. 1 Press AUTO PROGR. 2 VHF LOW B/G Note • During automatic channel presetting, your TV screen will indicate “B/G” , “I”, “D/K” or “M” for
Resumo do conteúdo contido na página número 10
Presetting channels (continued) Presetting channels manually Press SELECT until SELECT 1 “MANUAL PROGRAM” b MANUAL PROGRAM appears. Press + or – to enter the 2 “MANUAL PROGRAM” VHF LOW B/G b mode. Press PROGR +/– or the 3 1 2 3 number buttons until the PROGR desired program number 4 5 6 appears. or 7 8 9 -/-- 0 Press + or – until the 1 4 desired channel picture appears. b Press SELECT to exit the SELECT 5 “MANUAL PROGRAM” mode. To change the TV system setting If the picture or sound is abnormal
Resumo do conteúdo contido na página número 11
Using Your New TV To change the color system setting If the color is abnormal when receiving programs through the 8 (antenna input) terminal or the t (video input) jack. (1) Press SELECT until “COLOR SYS” appears. COLOR SYS: AUTO (2) Press + or – to select the appropriate AUTO PAL SECAM color system until the color is NTSC 4.43 NTSC 3.58 optimal. Tip • Normally set “COLOR SYS” to “AUTO”. Skipping program numbers Press PROGR +/– or the number buttons until the unused or unwanted 1 program number
Resumo do conteúdo contido na página número 12
% Watching the TV ?/1 t This section explains functions used a while watching the TV. Most operations can be done using the remote. 1 3 2 4 5 6 Number buttons 7 8 9 JUMP -/-- 0 JUMP SOUND PROGR MODE 2 +/– PROGR +/– SELECT FAVORITE + or – 1 indicator TV Press ! to turn on the TV. 1 When the TV is in the standby mode (the 1 indicator on the TV is lit red), press ?/1 on the remote or PROGR +/– on the TV. Press PROGR +/– or the 2 number buttons to select 1 2 3 PROGR the program number. 4
Resumo do conteúdo contido na página número 13
Using Your New TV Additional tasks To Press Turn off temporarily ?/1. The 1 indicator on the TV lights up red. ! on the TV. Turn off completely %. Mute the sound t to select “VIDEO 1”, “VIDEO 2” or “DVD”. Watch the video input To return to the TV program, press a. (VCR, camcorder, etc.) JUMP. Jump back to the previous program number . Display the on-screen information* SELECT repeatedly until “INTELLIGENT VOL” Adjust the volume of all appears, then press + or – to select “ON”. program numbers au
Resumo do conteúdo contido na página número 14
Watching the TV (continued) Setting the Wake Up timer Press until the desired WAKE UP TIMER:10M 1 period of time appears. After 10 minutes The Wake Up timer starts immediately after you have set it. WAKE UP TIMER:OFF WAKE UP TIMER:12H00M No Wake Up timer After 12 hours Select the program number or video input you want to display when you 2 wake up. Press ?/1 or set the Sleep timer if you want the TV to turn off automatically. 3 The indicator on the TV lights up orange when the TV goes into sta
Resumo do conteúdo contido na página número 15
Advanced Operations Advanced Operations 0 Customizing the SOUND PROGR MODE SOUND MODE picture and sound SELECT You can customize the picture and + or – sound by selecting the picture and PIC MODE FAVORITE sound modes or by adjusting its settings. You can change the sound effect by selecting the surround mode. TV Selecting the picture and sound modes To select the picture mode PIC MODE DYNAMIC STANDARD SOFT Press PIC MODE repeatedly until you get the desired picture mode. Select To “DYNAMIC” vi
Resumo do conteúdo contido na página número 16
Customizing the picture and sound (continued) Adjusting the picture and sound settings Press SELECT until the SELECT 1 desired setting appears. PICTURE 60 PICTURE COLOR BRIGHT HUE* Each time you press SELECT, the setting BALANCE TREBLE BASS SHARP item will change as follows: Press + or – to adjust the 2 item. To adjust other items, repeat steps 1 to 2. 3 * “HUE” can be adjusted for the NTSC system only. Notes • When you select a picture or sound mode, the adjusted settings will be reset accordin
Resumo do conteúdo contido na página número 17
Selecting the surround mode Press SELECT repeatedly SELECT 1 until “SURROUND” b SURROUND: MOVIE appears. Press + or – to select the 2 desired surround sound. MOVIE MUSIC OFF b Select To “MOVIE” listen to sound that spreads out over a large area, giving the feeling of being at a movie theatre. “MUSIC” listen to the sound that gives the feeling of being at a live concert. “OFF” turn off the surround sound. Advanced Operations 17
Resumo do conteúdo contido na página número 18
Viewing your 1 2 3 favorite channels Number 4 5 6 buttons 7 8 9 You can display six of your favorite JUMP -/-- 0 SOUND PROGR channels for quick and easy selection. MODE You can program the favorite channel PROGR +/– as well. + or – FAVORITE FAVORITE Selecting a favorite channel Press FAVORITE. FAVORITE CH 1 FAVORITE 1PR01 2PR02 3PR03 4PR04 5PR05 6PR06 Press the number button 1 1 2 3 2 from 1 to 6 to select the 4 5 6 desired favorite channel. When you use the “FAVORITE CH SETUP” feature for the
Resumo do conteúdo contido na página número 19
Blocking the channels (CHILD LOCK) 1 2 3 4 5 6 You can lock some program numbers to 7 8 9 prevent children from watching certain channels, by using the buttons on the -/-- JUMP 0 SOUND PROGR remote control. MODE SELECT + or – FAVORITE TV Select the program number you want to lock. 1 Press SELECT until “CHILD SELECT 2 LOCK” appears on the screen. CHILD LOCK: OFF Press + or – to select 3 “ON”. The symbol appears on 1 the screen. To cancel, press + or – to select “OFF”. The CHILD LOCK: ON symbo
Resumo do conteúdo contido na página número 20
Additional Information Self-diagnosis function Your TV is equipped with a self-diagnosis function. If there is a problem with your TV, the 1 indicator flashes red. The number of times the 1 indicator flashes indicates the possible causes. Front of TV 1 indicator Check that the 1 indicator flashes red several times between three second 1 intervals. Count the number of times the 1 indicator flashes. 2 Press ! (main power) to turn off your TV. 3 Inform your nearest Sony service center about the num
