Resumo do conteúdo contido na página número 1
DECT3380 Series User's Guide
What's in the box? You will also find:
DCX330 Accessory
DECT3380 base
handset and charger
with answering
Not pictured:
system and
- Rechargeable
cordless
battery
handset
(BT-1018)
- Battery cover
- Charger
AC adapter
(PS-0035)
If you purchased You should
model number: have:
DECT3380 None
Battery
Not pictured:
cover DECT3380-2 1 of each
- Rechargeable battery
DECT3380-3 2 of each
(BT-1018)
DECT3380-4 3 of each
- AC adapter (PS-0034)
DECT3380-5 4 of each
-
Resumo do conteúdo contido na página número 2
MULTIRANGE™ Charger and Accessory Handset If the model number ends in R, your package contains a DRX332 handset with a MULTIRANGE™ charger in place of one DCX330. The AC adapter for the DRX332 is PS-0033. For more information, see page 5. AC Adapter and Battery Specification Part Output AC adapter for - Input Voltage Number Voltage 7.8V AC @ DECT3380 Base PS-0034 120V AC, 60 Hz 450mA DCX330 Charger PS-0035 120V AC, 60 Hz 8V AC @ 300mA DRX332 MULTIRANGE 6.5V AC @ PS-0033 120V AC, 60
Resumo do conteúdo contido na página número 3
What’s in the manual? MULTIRANGE™ Charger and Answering System Options Accessory Handset ................... 2 (Ans. Setup) ............................ 22 AC Adapter and Battery Accessing the Answering Specification ............................. 2 System .................................... 23 Important Safety Instructions! ..... 3 Personalizing Your Greeting ..... 24 Getting Started ............................ 4 Getting Your Messages ............. 25 Screening Your Calls..................
Resumo do conteúdo contido na página número 4
Do not use the telephone to report a gas leak in the vicinity of the leak. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. Do not place the handset in any charging cradle without the battery installed and the battery cover securely in place. SAVE THESE INSTRUCTIONS! CAUTION! Risk of explosion if battery is replaced by an incorrect type! Dispose
Resumo do conteúdo contido na página número 5
If you have a DRX332 handset with a MULTIRANGE™ charger, be sure to use the correct AC adapter for the charger. Refer to the table on page 2 for a list of adapters/voltage requirements. For MULTIRANGE chargers, route the cord as shown: . Plug the other end of each adapter into a standard 120V AC power outlet. 7. Place one handset in the base and the other(s) in the charger(s) with the display(s) facing forward. The handset display should light up; if it doesn’t, reseat the handset o
Resumo do conteúdo contido na página número 6
Your base supports a total of two (2) DRX332 MULTIRANGE chargers, including any that were supplied with your phone. To use the charger's MULTIRANGE function, you must register the charger to a DECT3380 base. Any MULTIRANGE chargers packaged with your base are registered and ready to use out of the box. Just pick the best location and plug it in. Usually, you can't tell when a handset switches between the base and the charger in the middle of a call. How it works The MULTIRANGE charg
Resumo do conteúdo contido na página número 7
Placing a MULTIRANGE charger Make sure you have a strong signal from the base (at least 3 bars in the handset display). Put the charger at least 35 feet away from the base or any other MULTIRANGE charger. (If you put the charger on a different floor from the base, don't forget to allow 35 feet vertically, also.) Picking the best spot The best spot for the MULTIRANGE charger is as far from the base as possible while still maintaining a good signal, or near the edge of the base’s cove
Resumo do conteúdo contido na página número 8
the base, there may be interference from electronic devices, or the signal might be blocked by thick walls or metal objects. Try moving the charger to another location. UNDERSTANDING YOUR PHONE Parts of the Base Message counter DOWN UP ON/OFF DO NOT PLAY/ DELETE Charging DISTURB STOP contacts FIND REV FWD 8
Resumo do conteúdo contido na página número 9
Base keys and how they work Key name What it does (and icon) find - In standby: page all handsets to find a lost one. do noT disTurb - In standby: turn the Do Not Disturb feature on or off ( ) (see page 21). on/off - In standby: turn the answering system on or off. rEV ( ) - While a message is playing: for the first 2 seconds, go to the previous message; after that: go to the start of this message. PLaY/sToP - In standby: start playing messages. ( ) - While a message is playing: stop p
Resumo do conteúdo contido na página número 10
Parts of the Handset Visual Earpiece ringer MESSAGES Display UP CLEAR/ MENU/SELECT INTERCOM CALLER ID/ RIGHT PHONEBOOK/ LEFT END TALK/ FLASH DOWN Twelve- key dial pad MUTE REDIAL/ SPEAKER PAUSE Microphone Charging contacts Handset keys and how they work Key name What it does (and icon) - In standby: increase the ringer volume. uP ( ) - During a call: increase the call volume. - In the menu or any list: move the cursor up one line. - In standby or during a call: open the Caller ID list. C/
Resumo do conteúdo contido na página número 11
Key name What it does (and icon) - During a call: hang up. End ( ) - In the menu or any list: exit and go to standby. - In standby: page another handset using the intercom. - During a call: put the call on hold and start a call CLEar/inTErCoM transfer. - While entering text: delete one character, or press and hold to delete all the characters. - In standby or during a call: open the phonebook. PhonEbook/LEfT - In a menu: go back to the previous screen. ( ) - During text entry: move the c
Resumo do conteúdo contido na página número 12
Display icons and what they mean Since the icons appear based on what you’re doing with the phone, you won’t ever see all of these icons at the same time. Icon What it means The ringer is turned off: this handset will not ring when a call comes in. You have a voice message waiting (see page 22). Privacy Mode is on: no other handset can join your call. The speakerphone is on. The microphone is muted, and the caller can’t hear you. T-coil mode is on (see page 30). The battery is 1) empty
Resumo do conteúdo contido na página número 13
Using the Menus To open the menu, press Press MENU/SELECT MENU/SELECT. to choose the highlighted option. The cursor Handset Setup shows the highlighted Ans. Setup T-coil option. To move the Day & Time Ringer Tones cursor, use UP & DOWN. To go back a press END to OR screen, press exit the PHONEBOOK/LEFT menu. If you open the menu during a call, use PhonEbook/LEfT to back out of the menu without hanging up. If you don't press any keys for 30 seconds, the handset exi
Resumo do conteúdo contido na página número 14
Banner Change the name used on the handset’s display. Handset Change the display language. Language Have the keypad sound a tone when you press a Key Touch Tone key. The Ans. Setup menu This menu controls the options and settings for your answering system (see page 22). The Day and Time menu If you subscribe to Caller ID, the phone automatically sets the day and time when it receives Caller ID information from your phone company. If you want to set the clock manually, just open the menu an
Resumo do conteúdo contido na página número 15
The phone defaults to a capital letter for the first letter and any letter after a space; otherwise, it uses small letters. To switch to all capital letters, press . The phone defaults to all * capital letters first (e. g. ABCabc2) until you enter a blank space or press again. (Any time you want to change case, just press .) * * If two letters in a row use the same number key, enter the first letter and wait a few seconds (or press righT ); the cursor will move to the next space. Ent
Resumo do conteúdo contido na página número 16
Do this To... from the earpiece... from the speaker... switch between the speakerphone and Press sPEakEr . earpiece mute the ringer for While the phone is ringing, press MuTE . this call only Change the volume Speaker and earpiece volume Ringer volume - You can change the volume of - You can change volume the speaker on the base and each of the ringer on the cordless handset separately. base and each handset separately. - You can change the volume of the earpiece on each handset; this does
Resumo do conteúdo contido na página número 17
current call and the waiting call, press TaLk/fLash . Remember, each time you switch, there is a short pause before you’re connected to the other caller. Using Caller ID and Redial Lists Caller ID (CID) is a service available from your telephone provider that shows the phone number (and sometimes the caller’s name) of incoming calls. Contact your telephone provider for more information. Caller ID (CID) list Redial list - The phone saves the information for the last 30 received calls to the
Resumo do conteúdo contido na página número 18
To select a number, highlight the number and press MEnu/sELECT . The phone gives you the following options: Delete Entry Erase the number from the list. Add the number to the phonebook. The handset prompts Store Into you to edit the name and number and select a personal Pb ringtone. Delete All (Caller ID list only.) Erase all numbers from the list. Using the Phonebook The phone can store up to 70 entries in its central phonebook; the phonebook is shared by all cordless handsets. Only
Resumo do conteúdo contido na página número 19
Phonebook menu options With the phone in standby, open the phonebook. From the main phonebook screen (instead of an individual entry), press MEnu/ sELECT . The phone gives you the following options: Add an entry to your phonebook. The handset Create New prompts you to enter a name and number and select a personal ring. Delete All Erase all the entries in the phonebook. finding a Lost Handset With the phone in standby, press find on the base. All the handsets will beep for 1 minute; to end
Resumo do conteúdo contido na página número 20
Conference calling When an outside call comes in, two handsets can join in a conference call with the outside caller. To join an ongoing call, press TaLk/fLash or sPEakEr . To leave the conference call, hang up normally; the other handset remains connected to the call. Privacy mode You can prevent other handsets from joining a call. Start your call as usual, then press MEnu/sELECT ; the display shows Call Privacy. Press MEnu/sELECT again to turn privacy mode on (you’ll see in the d
