Resumo do conteúdo contido na página número 1
43-3823.FM Page 1 Thursday, March 27, 2003 10:22 AM
2.4GHz Cordless Phone
with Answering Machine
43-3823
10 Number Memory Dialing—stores 10
numbers in memory for easy dialing. See
“Making Calls with Memory Dialing” on
Page 15.
Long Battery Life—the supplied battery
pack (when fully charged) provides about 7
hours of talk time or 14 days of standby time.
20 Channels—automatically selects a clear
channel when you make or answer a call. You can
also manually cha
Resumo do conteúdo contido na página número 2
Important Safety Instructions 43-3823.FM Page 2 Thursday, March 27, 2003 10:22 AM WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture. CONTENTS CAUTION: TO REDUCE THE RISK OF ELECTRIC Important Safety .CAUTION. SHOCK, DO NOT REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER Instructions ........................... 2 RISK OF ELECTRIC SHOCK ! SERVICING TO QUALIFIED PERSONNEL. DO NOT OPEN Battery Safety Instructions ... 4 The
Resumo do conteúdo contido na página número 3
43-3823.FM Page 3 Thursday, March 27, 2003 10:22 AM 11. Slots and openings in the telephone’s cabinet CONTENTS and the back or bottom are provided for (continued) ventilation. To protect the telephone from Setting a Personal Security Code (PIN) ..... 21 overheating, these openings must not be Setting the Ring Time .. 21 blocked or covered. The openings should never Selecting the message Record Time ................ 22 be blocked by placing the product on a bed, Setting the Message
Resumo do conteúdo contido na página número 4
Battery Safety Instructions 43-3823.FM Page 4 Thursday, March 27, 2003 10:22 AM • If the product has been exposed to rain or water. • If the product does not operate normally by following the operating instructions. 18. Adjust only those controls that are covered by the operating instructions because improper adjustments of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. 19. If the
Resumo do conteúdo contido na página número 5
43-3823.FM Page 5 Thursday, March 27, 2003 10:22 AM • Charge the battery pack provided with or identified for use with this product only in accordance with the instructions and limitations specified in the instruction manual provided for this product. • Observe proper polarity orientation between the battery pack and battery charger. SAVE THESE IMPORTANT ! ! Cordless phones such as INSTRUCTIONS this one require AC power to operate. When the AC power is off, you cann
Resumo do conteúdo contido na página número 6
Introduction 43-3823.FM Page 6 Thursday, March 27, 2003 10:22 AM The digital answering system stores up to 13 minutes of messages on a computer chip and records each message’s day and time. This gives you advanced capabilities over tape-based answering machines: •You can delete individual messages and save the rest. • There are no tapes to bother with and no tape mechanisms to wear out. The remote operation feature lets you operate your answering system from a touch-tone phone (or
Resumo do conteúdo contido na página número 7
43-3823.FM Page 7 Thursday, March 27, 2003 10:22 AM INSTALLATION MOUNTING THE PHONE You can place the phone on a desk or table, mount CAUTION it on a standard wall plate, or directly on a wall. You must use a Choose a location that is: ! Class 2 power source that • near an AC outlet supplies 9V DC and • near a modular telephone line jack delivers at least 350 mA. Its center tip must be set • out of the way of normal activities to positive and its plug •away f
Resumo do conteúdo contido na página número 8
Installation 43-3823.FM Page 8 Thursday, March 27, 2003 10:22 AM 3. Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the back. 4. Route the adapter’s cord through the strain relief slot on the base’s bottom. 5. Plug the adapter into a standard AC outlet. 6. Lift the base’s antenna to a vertical position. On a Wall Plate or Wall To mount the phone directly on a wall, you need two screws (not supplied) with heads that fit into the 15 keyhole slots
Resumo do conteúdo contido na página número 9
43-3823.FM Page 9 Thursday, March 27, 2003 10:22 AM 5. For a wall plate, plug the modular cord’s other end into the wall plate jack, then align the base’s keyhole slots with the wall plate studs and slide the base downward to secure it. For direct wall mounting, align the base’s keyhole slots with the mounting screws and slide the base downward to secure it. 6. Plug the adapter into a standard AC outlet. 7. Press and lift out the handset holder, flip it over
Resumo do conteúdo contido na página número 10
Installation 43-3823.FM Page 10 Thursday, March 27, 2003 10:22 AM 3. Plug the battery pack’s connector into the socket in the compartment. The IMPORTANT ! ! connector fits only Be sure the battery pack is one way. properly connected before you try to charge it. The 4. Put the battery pack CHARGE/IN USE indicator in the compartment. lights when the handset is 5. Replace the cover. on the base even if the battery pack is not To charge the battery pack, place the handse
Resumo do conteúdo contido na página número 11
43-3823.FM Page 11 Thursday, March 27, 2003 10:22 AM The supplied battery pack should last about a year. If the battery pack does not hold a charge for more than 2 hours after an overnight charge, replace it with a new 3.6V, 600 mAh battery pack with a connector that fits the socket in the battery compartment. You can order a replacement battery pack through your local RadioShack store (or online WARNING at RadioShack.com). Install the new battery pack o o Dispose of the old batt
Resumo do conteúdo contido na página número 12
Operation 43-3823.FM Page 12 Thursday, March 27, 2003 10:22 AM 1. Press and hold the FLASH until you hear a confirmation tone. 2. To set the dial mode for pulse dialing, press #. Or to set the dial mode for tone dialing, press ∗/tone. You hear a confirmation tone to indicate the setting is complete. OPERATION MAKING AND RECEIVING CALLS Even when you turn off the base’s ringer, you can still make or receive calls using this phone. Telephones on the same line and the handset (if its ringe
Resumo do conteúdo contido na página número 13
43-3823.FM Page 13 Thursday, March 27, 2003 10:22 AM ADJUSTING THE HANDSET RINGER AND EARPIECE VOLUME Handset Ringer Tone When the phone is in standby mode, press VOL/ RING repeatedly to listen to the two ringer tone options. Earpiece Volume The handset earpiece volume settings (Low, Medium and High) can only be adjusted during a call. Press VOL/RING repeatedly to select Low, Medium and High. When you hang up, the phone keeps the last volume setting selected. Temporarily Mute Ringer If
Resumo do conteúdo contido na página número 14
Operation 43-3823.FM Page 14 Thursday, March 27, 2003 10:22 AM TRAVELING OUT-OF-RANGE During a call, as you begin to move your handset too far from your base unit, your call will terminate within 1 minutes. SELECTING A DIFFERENT CHANNEL If you encounter interference while using your phone, you can manually change the phone’s channel for clear operation. This function works only when the phone is in use. Press CHANNEL. The TALK/BATT LOW LED flashes, indicating the phone is changing to an
Resumo do conteúdo contido na página número 15
43-3823.FM Page 15 Thursday, March 27, 2003 10:22 AM MEMORY DIALING Ô NOTE Ô Storing Phone Numbers STORING PHONE NUMBERS IN In Memory • In memory dialing MEMORY operation, you must Memory Dialing allows you to dial a number using press a key within 30 just a few key presses. Your phone stores up to 10 seconds. Otherwise, an numbers in the handset. Ô error tone will sound and the phone will return to 1. When the phone is in the stand-by mode, press standby. MEM. The TALK/BATT LOW
Resumo do conteúdo contido na página número 16
Memory Dialing 43-3823.FM Page 16 Thursday, March 27, 2003 10:22 AM An example of this is a bank account number. Once you have called your bank, and are prompted to enter the account number, press MEM and the location number where the special number has been stored. Store your special number in memory as you would store a phone number. (See “Storing Phone Numbers in Memory” on Page 15.) ERASING A STORED NUMBER FROM MEMORY 1. Press MEM twice. 2. Press the memory location (0-9). You hear
Resumo do conteúdo contido na página número 17
43-3823.FM Page 17 Thursday, March 27, 2003 10:22 AM 4. To actually store a number, press SPEED DIAL. A tone indicates that the number is stored. If there is a number already stored, the new number will be overwritten without warning. MAKING CALLS WITH THE SPEED Ô NOTE Ô DIAL If the Speed Dial does not When the phone is in the standby mode, simply have a stored number, the press SPEED DIAL. The number stored in the Speed handset will beep rapidly Dial memory location is instantly di
Resumo do conteúdo contido na página número 18
The Integrated Answering Device 43-3823.FM Page 18 Thursday, March 27, 2003 10:22 AM FEATURES • Digital Tapeless • Time and Day Recording Announcement • 13 minutes of • Remote Message Recording Time Retrieval • Call Screening •Toll Saver • Selectable • Conversation Outgoing Recording Messages •Voice Prompts for •Voice Memo Guidance (Bi-lingual Announcement Option) Digital Tapeless Recording allows you to quickly review, save, or delete the messages you choose. You will never have to worr
Resumo do conteúdo contido na página número 19
43-3823.FM Page 19 Thursday, March 27, 2003 10:22 AM 2. To turn the answering system off, press ANSWER again. After the announcement “Answering system is off” the message counter display will no longer be illuminated. SETTING UP YOUR ANSWERING SYSTEM Using the Menu Mode The Menu mode allows you to set the following Ô NOTE Ô Answering System functions. Ô • For your convenience, voice prompts will guide •To scroll through the you through the menu menu options, mode. repeatedly pres
Resumo do conteúdo contido na página número 20
The Integrated Answering Device 43-3823.FM Page 20 Thursday, March 27, 2003 10:22 AM Setting the Time The clock on the answering system starts when power is supplied to the base. Follow these steps to Ô NOTE Ô set the clock to the correct time. Ô • Normally the idle time for the menu mode is 10 1. Press clock/menu. seconds before the system returns to The system announces “Time”, the current time standby. However for and the guidance for setting the time. setting the time, the idle
