Resumo do conteúdo contido na página número 1
NetLink e340/h340/i640 Wireless Telephone
Mitel Networks 3300 and SX-200 ICP
Configuration and Administration
Part Number: 72-1084-02
Issue G
Resumo do conteúdo contido na página número 2
SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation Trademark Information Notice Polycom® and the logo designs Polycom, Inc. has prepared this document for use SpectraLink® by Polycom personnel and customers. The LinkPlus drawings and specifications contained herein are Link the property of Polycom and shall be neither NetLink reproduced in whole or in part without the prior SVP w
Resumo do conteúdo contido na página número 3
SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation Table of Contents 1. About This Document 4 1.1 Referenced Documents 4 1.2 Customer Support Hotline 4 1.3 Icons and Conventions 5 2. NetLink e340/h340/i640 Wireless Telephone Overview 6 2.1 QoS and Security 6 2.2 Quick Start Guide 7 2.3 System Diagram 8 2.4 System Components 9 3. The NetLink Wireless Telephone 11 3.1 Specificati
Resumo do conteúdo contido na página número 4
SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation 1. About This Document This document explains how to configure and maintain the SpectraLink e340/h340/i640 Wireless Telephone within the Mitel Networks 3300 and SX-200 Integrated Communications Platform (ICP). 1.1 Referenced Documents SpectraLink 8000 SVP Server Administration Guide for Mitel and Cisco (1725-36031-001) Available a
Resumo do conteúdo contido na página número 5
SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation 1.3 Icons and Conventions This manual uses the following icons and conventions. Caution! Follow these instructions carefully to avoid danger. Note these instructions carefully. This typeface indicates a key, label, or button on the NetLink Telephony NORM Gateway. PN: 72-1084-02-G.doc Page 5
Resumo do conteúdo contido na página número 6
SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation 2. NetLink e340/h340/i640 Wireless Telephone Overview The NetLink e340/h340/i640 Wireless Telephone is a mobile handset for workplace IP telephone systems. NetLink Wireless Telephones operate over an 802.11b wireless Ethernet LAN providing users a wireless voice over IP (VoIP) extension. By seamlessly integrating with the Mitel IP te
Resumo do conteúdo contido na página número 7
SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation 2.2 Quick Start Guide 1. A wireless LAN must be properly configured and operational through the use of 802.11b APs listed on the NetLink Wireless Telephone Access Point Compatibility matrix. 2. A TFTP server must be available on the network in order to load the appropriate software into the NetLink Wireless Telephones. See the Licen
Resumo do conteúdo contido na página número 8
SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation 2.3 System Diagram The following diagram shows the NetLink components residing on a network with the Mitel Networks IP telephony system, APs, and wireless LAN Ethernet Switched Hub. Access Point TFTP server NetLink SVP Server NetLink Ethernet switch Wireless Telephones Access Point Mitel ICP Platform optional Wireless POS
Resumo do conteúdo contido na página número 9
SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation 2.4 System Components NetLink e340/h340 Wireless Telephone The NetLink e340/h340 Wireless Telephone is a lightweight, durable handset specifically designed for mobile workplace use within a facility using the supported Mitel Networks IP telephony system and 802.11b APs in a wireless LAN. NetLink i640 Wireless Telephone The NetLink
Resumo do conteúdo contido na página número 10
SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation as long as the SVP Server and APs are on the same subnet. However, in such networks, it is possible for the QoS features of the NetLink SVP Server to be compromised, and voice quality may suffer. Any network that consists of more than a single Ethernet switch should be thoroughly tested to ensure any quality issues are detected. Not
Resumo do conteúdo contido na página número 11
SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation 3. The NetLink Wireless Telephone 1 NetLink e340/h340 Wireless Telephone NetLink i640 Wireless Telephone 3.1 Specifications Radio frequency: 2.4000 – 2.4835 GHz Transmission type: Direct Sequence Spread Spectrum (DSSS) Transmit data rate: Up to 11 Mb/s Radio QoS: SpectraLink Voice Priority (SVP) Wireless security: Wired Equivalent
Resumo do conteúdo contido na página número 12
SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation 3.2 The Display Alphanumeric Display information provided by the supported Mitel Networks VoIP solution when the handset is off-hook will be passed directly to the handset display. The handset will display up to 18 characters of each line. Certain characters may be used by the supported Mitel IP PBX solution that are not implement
Resumo do conteúdo contido na página número 13
SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation Ringing and tones The ringing types are programmed by the handset user into the handset and are not accessible or changeable by the supported Mitel Networks VoIP solution. When Ring Cadence is set to PBX and whenever possible, the audible and vibrating ringer on the handset will follow the MiNET cadence commands provided by the suppo
Resumo do conteúdo contido na página número 14
SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation 3.3 Startup Sequence The handset goes through an initialization sequence at startup. The line icons 1-9 display and count down as the handset steps through this sequence. This is usually very rapid. If there is any difficulty at any step that prevents initialization from continuing, an error message will display and the related icon(s
Resumo do conteúdo contido na página número 15
SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation 3.4 Handset Modes Standby (on-hook) In the standby mode the handset is waiting for an incoming call or for the user to place an outgoing call. The extension number is shown on the display and there is no dial tone. In this mode, the handset is conserving battery power and wireless LAN bandwidth. When an incoming call occurs the hand
Resumo do conteúdo contido na página número 16
SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation 3.5 NetLink Wireless Telephone Displays Status display area Displays information from the PBX in one line of text and displays available softkeys on the second line. Muted is displayed when local muting is activated. The PBX text may be truncated as the 5220 IP phone has 20 characters and the Wireless Telephone display area is 18 cha
Resumo do conteúdo contido na página número 17
SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation 4. NetLink Wireless Telephone Configuration The NetLink e340/h340/i640 Wireless Telephones should be provisioned in the supported Mitel Networks VoIP solution in the same manner as the Mitel Networks 5220 Internet Telephones. Each handset may be configured for site-specific requirements by opening the Admin menu and selecting options
Resumo do conteúdo contido na página número 18
SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation Entering and editing Admin menu options An asterisk (*) next to an option indicates that it is selected. Use the Up, Down, and Select side buttons and the softkeys to navigate and select: Display previous/next menu item. Up/Down buttons: Selects the menu item or option. Select button: Selects the menu item or option. OK softkey S
Resumo do conteúdo contido na página número 19
SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation Admin menu nd rd th th Admin Menu Items 2 Level 3 Level 4 Level 5 Level Phone Config License Option Set Current [List per download] Clear PIN Number 5220 Emulation *Disable 5220 Enable 5220 OAI On/Off *Enable OAI Disable OAI Push-to-talk *Allowed Channels *Channel 1 *Channel 2 *Channel 3 *Channel 4 *Channel 5 *C
Resumo do conteúdo contido na página número 20
SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation nd rd th th Admin Menu Items 2 Level 3 Level 4 Level 5 Level Transmit Power *Maximum 50 mW † 30 mW † 20 mW 15 mW 10 mW 5 mW Diagnostics Run Site Survey Diagnostics Mode Diagnostics On *Diagnostics Off Syslog Mode *Disabled Errors Events Full Restore Defaults * default setting † 50 mW and 30 mW only
