Resumo do conteúdo contido na página número 1
FCC Statement 2
LIGHTNING 3
Installation 4
Selecting a Location 4
Using AC Power 4
Connecting the Phone 4
Connecting, Charging, And Replacing The Battery Pack 5
Attaching the Headset Holder 6
Connecting and Adjusting the Headset 7
Setting the Ringer 7
Setting the Dialing Mode 7
Using the Belt Clip 7
Using the Cord Clip 8
Operation 8
Making And Receiving Calls 8
Changing Channels 8
Setting the Volume 8
Using Redial 8
Using Mute 9
Using Flash 9
Using Tone Services on a Pulse Li
Resumo do conteúdo contido na página número 2
900 MHz Headset Phone 43-3522/3523 OWNER’S MANUAL — Please read before using this equipment. Thank you for shopping at Redial — lets you easily redial the last RadioShack. Your 900MHz Headset number dialed. Phone gives you communication with Mute — prevents the person on the both portability and convenience. It other end of the phone line from comes in two parts, a headset and a hearing you as you talk to someone base. else in the room. The phone’s headset connects to a Flash — sends an
Resumo do conteúdo contido na página número 3
receive calls if there is an AC power device, such as a telephone or failure. answering machine) that you connect to the telephone line draws power from Note: Your phone operates on the telephone line. We refer to this standard radio frequencies as power draw as the device's ringer allocated by the FCC. It is possible for equivalence number, or REN on the other radio units operating nearby on bottom of your phone’s base. similar frequencies to unintentionally intercept your conversati
Resumo do conteúdo contido na página número 4
This equipment has been tested and that you stop using your headset found to comply with the limits for a phone. Class B digital device, pursuant to Part Changes or modifications not 15 of the FCC Rules. These limits are expressly approved by RadioShack designed to provide reasonable may cause interference and void the protection against harmful interference user’s authority to operate the in a residential installation. This equipment. equipment generates, uses and can radiate radio
Resumo do conteúdo contido na página número 5
Using AC Power INSTALLATION Power the headset telephone using Selecting a Location the supplied 12V, 200mA AC/DC adapter. You can place the phone on a desktop, shelf, or table. Select a location that is: Cautions: • near an easily accessible AC You must use a Class 2 outlet power source that sup- ! plies 12V DC and deliv- • near a telephone line jack ers at least 200mA. Its plug must fit the telephone's DC 12V 200mA • out of the way of normal activities jack. The supplied adapter meets •
Resumo do conteúdo contido na página número 6
Plug the modular cord’s other end into pack, the phone might not work. a modular phone line jack. Return the remote keypad to the base for about 5 seconds to reset Plug the supplied AC adapter’s barrel the security access-protection plug into the DC 12V 200mA jack on the code. back of the base. • About once a month, fully Plug the adapter into a standard AC discharge the battery pack by outlet. keeping the remote keypad off the base until the TALK/LOW BATT indicator lights. Otherwise,
Resumo do conteúdo contido na página número 7
leave it on the base to charge the • Be careful not to short the battery battery pack. pack by touching the conducting materials, such as rings, • If you will not use your phone for a bracelets, and keys. The battery long time, disconnect its battery pack or conductor might overheat pack. This helps increase the and burn. battery pack’s life. Important: The EPA ® The supplied battery pack should last certified RBRC Battery about a year. If the battery pack does Recycling Seal on the
Resumo do conteúdo contido na página número 8
If you are not sure which type you Connecting and Adjusting have, do this simple test after charging the Headset the battery pack. Insert the headset’s plug into the jack 1. Set TONE/PULSE to TONE. on the side of the remote keypad. 2. Lift the remote keypad from the Put on the headset, and adjust the base and press TALK/HANG UP so band until it rests with almost no the TALK/LOW BATT indicator pressure on your ear and the top of and the IN USE/CHARGE your head. indicator, then listen
Resumo do conteúdo contido na página número 9
communication with the base and Using the Cord Clip the call might be disconnect. If this Insert the cord into the cord clip’s happens, return the remote hook, then attach the cord clip to your keypad to the base for about 5 lapel or shirt to position the cord. seconds to reset the security access-protection code. OPERATION Changing Channels Making And Receiving Calls Your phone has an Auto Scan feature that automatically selects a clear Before using the phone, put the channel when you
Resumo do conteúdo contido na página número 10
• The redial memory can also store When the service answers, press tone entries and pause entries. TONE/*. Any additional numbers you dial are sent as tone signals. Using Mute After you complete the call, press TALK/HANG UP or return the remote Press MUTE to talk to someone else in keypad to the base. The phone the room without the person on the automatically resets to pulse dialing. other end of the phone line hearing your conversation. You can still hear the person on the other end of
Resumo do conteúdo contido na página número 11
2. Dial the desired number (up to 16 Entering a Pause in a digits). Memory Number 3. Press and release MEM again. In some telephone systems, you must dial an access code (9, for example) 4. Press and release the memory and wait for a second dial tone before location number (0-9) to store the you can dial an outside number. You number. Two long beeps sound, can store the access code with the and the number is stored in phone number. However, if you do, memory. you should also store a
Resumo do conteúdo contido na página número 12
Tone Services on a Pulse Line” on department, or ambulance, for Page 9). example) and you want to test the stored number, make the test call during the late evening or early Testing Stored Emergency morning to avoid peak demand Numbers periods. Remain on the line to explain the reason for your call. If you store an emergency service’s number (police department, fire TROUBLESHOOTING We do not expect you have any problem with your telephone, but if you do, these suggestions might help. P
Resumo do conteúdo contido na página número 13
If additional phones have been added to the line, recalculate the REN (see “FCC Statement” on Page 2). If you still have problems, disconnect the phone. If other phones on the same line work properly, the fault is in this phone or its installation. If you cannot find the problem, take the phone to your local RadioShack store for assistance. CARE Keep the phone dry; if it gets wet, wipe it dry immediately. Use and store the tele- phone only in normal temperature environments. Handle the phone
