Resumo do conteúdo contido na página número 1
25898
5.8 GHz Cordless Call
Waiting Caller ID Telephone/
Answering System
User’s Guide
We bring good things to life.
Resumo do conteúdo contido na página número 2
EQUIPMENT APPROVAL INFORMATION Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provi
Resumo do conteúdo contido na página número 3
INTERFERENCE INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection again
Resumo do conteúdo contido na página número 4
TABLE OF CONTENTS TELEPHONE OPERATION ................................ 16 EQUIPMENT APPROVAL INFORMATION................. 2 MAKING A CALL ...................................... 16 INTERFERENCE INFORMATION ............................ 3 ANSWERING A CALL ................................. 16 HEARING AID COMPATIBILITY............................ 3 IN USE INDICATOR ................................... 17 INTRODUCTION .............................................. 6 REDIAL .............................
Resumo do conteúdo contido na página número 5
ADVANCED FEATURES ................................... 24 HANDSET SOUND SIGNALS ........................... 28 CHANNEL BUTTON ................................... 24 DISPLAY MESSAGES ..................................... 28 REMOTE ACCESS ......................................... 24 ANSWERING SYSTEM DISPLAY MESSAGES ....... 30 CORDLESS HANDSET ................................ 24 TROUBLESHOOTING TIPS ................................ 30 ANSWERING SYSTEM INDICATOR ........... 25 CORDLESS PHONE SOLUTIO
Resumo do conteúdo contido na página número 6
INTRODUCTION CAUTION: When using telephone equipment, there are basic safety instructions that should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference. This telephone/answering system is designed to be simple to use, however, you can reach its full potential more quickly by taking a few minutes to read this user’s guide. This telephone /answering system is a multifunction product for use with Call Waiting Caller ID servi
Resumo do conteúdo contido na página número 7
l a i d e r skip del chan review play/ stop L 1 4ghi 7pqrs ex * it rev O ume vol V a BEFORE YOU BEGIN PARTS CHECKLIST Make sure your package includes the items shown here. PAGE delete memo ans on/off announce call bac talkk - - Handset battery mute memory 2abc play/stop jkl 5 8tuv charge in use 0oper erase Base Handset Belt clip Long telephone AC power line cord adaptor TELEPHONE JACK REQUIREMENTS Wall plate To use this phone, you need an RJ11C type modular telephone jack, which might look like
Resumo do conteúdo contido na página número 8
l a i d e r skip del chan review play/ stop L 1 ghi 4 pqrs 7 exit * rev O volume V a HANDSET AND BASE LAYOUT display talk/callback button CID-VOL (-) button CID-VOL (+) button redial button talk format/answerer call back button - memory button - headphone jack mute del/chan button memory mute button abc 2 play/stop review button jkl 5 flash/prog button tuv 8 play/stop button oper 0 skip button erase * exit button # pause button message indicator erase button volume buttons rev button page button
Resumo do conteúdo contido na página número 9
INSTALLATION • Never install telephone wiring during a lightning storm. • Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. • Never touch non-insulated telephone wires or terminals, unless the telephone line has been disconnected at the network interface. • Use caution when installing or modifying telephone lines. • Temporarily disconnect any equipment connected to the phone such as faxes, other phones, or modems. IMPORTANT INSTALLATION GU
Resumo do conteúdo contido na página número 10
3. Install the handset battery. NOTE: You must connect the handset battery before use. NOTE: Battery and battery door are packaged together inside a plastic bag and are separate from the handset. • Locate the battery compartment on the back of the handset. • Plug the battery pack cord into the jack inside the compartment. • Insert the battery pack. BATTERY RED WIRE PRESS DOWN FIRMLY BLACK WIRE NOTE: It is important to maintain the polarity (black and red wires) to the jack inside the compartmen
Resumo do conteúdo contido na página número 11
WALL MOUNTING NOTE: For best results, charge the telephone/answering system on a flat surface before hanging it on the wall. Slip the mounting holes (on the back of the base) over the wall plate posts and slide the unit down into place. (Wall plate not included.) ANSWERING SYSTEM SETUP This section shows you how to set up your answering system to receive incoming calls. Before you begin the set up process, you must turn on the answering system. • Press the ans on/off button to turn the answering
Resumo do conteúdo contido na página número 12
3. Press and hold the hour button on the base to set the hour (a.m. or p.m.). Example: 12AM, 1AM, or 12PM, 1PM. 4. Press and hold the min button on the base to set the minute. The time advances in 5-minute intervals, or tap and release to advance in 1 minute intervals. SPEAKER VOLUME Use the volume (- / +) buttons to adjust speaker volume on the base to a comfortable level. L1 is the minimum speaker volume and L8 is the maximum. RECORDING THE OUTGOING ANNOUNCEMENT For best results when recording
Resumo do conteúdo contido na página número 13
NOTE: If you select Toll Saver (TS) the unit answers after the 3rd ring if there are NEW and unread messages, OR the unit answers after the 5th ring if there are NO new and unread messages. ANSWERING SYSTEM OPERATION This section discusses the buttons and features on the answering system. MESSAGES INDICATOR The messages indicator shows you how many messages you have received, and the indicator blinks when new messages are received. The ans on/off button must be on in order for the messages ind
Resumo do conteúdo contido na página número 14
MEMORY FULL When the answering system memory is full, the system answers after 10 rings. You should erase some messages so the answering system may record new messages. ERASING MESSAGES You may erase messages three ways: one message at a time from the base; all messages from the base; or one message at a time from the handset or a phone in another location. 1. To erase one message at a time from the base: • Press play/stop. The message plays. • Press and release the delete button. 2. To erase al
Resumo do conteúdo contido na página número 15
TELEPHONE SET UP PROGRAMMABLE MENUS There are four programmable menus available on the handset: Language, Local Area Code, Ringer Tone and Factory Default. When you program these settings, make sure the phone is OFF ( not in talk mode). DISPLAY LANGUAGE 1. Press the flash/prog button on the handset until 1 ENG 2 FRA 3 ESP shows in the display. 2. Use the CID-VOL (- or +) buttons on the handset or the handset touch- tone pad to select 1, 2, or 3. 3. Press the flash/prog button again. NOTE: Press
Resumo do conteúdo contido na página número 16
FACTORY DEFAULT As you become familiar with this system, you may prefer to use the system’s original settings. Follow the steps below to return to the factory default settings. 1. Press the flash/prog button until DEFAULT shows in the display. The default is NO. 2. Use the CID-VOL (- or +) buttons to select YES or NO. 3. Press the flash/prog button again. You will hear a confirmation tone. NOTE : The default settings are ENGLISH, AREA CODE - - -, and RINGER TONE 1. NOTE : Press the *exit button
Resumo do conteúdo contido na página número 17
IN USE INDICATOR When the handset is ON (in TALK mode), the talk/callback button lights up when the handset is taken off-hook. The charge/in use indicator on the base is lit. During an incoming call, the charge/in use indicator on the base and the handset talk/callback button flashes. REDIAL 1. Press the talk/callback button on the handset. 2. Press the redial button to redial the last number you called (up to 32 digits). If you get a busy signal, and want to keep dialing the number, press redia
Resumo do conteúdo contido na página número 18
RINGER ON/OFF SWITCH The handset ringer switch may be set to ON or OFF. If the switch is off, the unit does not ring. PAGING THE HANDSET This feature helps locate a misplaced handset. 1. Press the page button on the base. The handset beeps for two minutes, and PAGING shows on the handset’s display. 2. To cancel the page press the talk/callback button on the handset or the page button on the base. NOTE: You may still page the handset with the ringer off. CALLER ID (CID) Caller ID (CID) is a servi
Resumo do conteúdo contido na página número 19
IMPORTANT: In order to use all of the Caller ID features of this unit, you must subscribe to either the standard Name/Number Caller ID Service or Call Waiting Caller ID Service. To know who is calling while you are on the phone, you must subscribe to Call Waiting Caller ID Service. RECEIVING AND STORING CID INFORMATION When you receive a call, the CID information is transmitted by the phone company to your Caller ID telephone between the first and second ring. When the phone’s CID memory is full
Resumo do conteúdo contido na página número 20
STORING CID RECORDS IN MEMORY 1. Make sure the phone is OFF (not in talk mode). 2. Press the CID-VOL (- or +) button on the handset until the desired CID record is displayed. 3. Press the memory button on the handset. 4. Press a number key (0-9) on the handset to store the CID information in that memory location. You will hear a confirmation tone. NOTE: If the memory location is occupied, REPLACE MEMO? is displayed, and you must confirm replacement by pressing the memory button. STORING A REDIAL
