Resumo do conteúdo contido na página número 1
FS-9130DN
FS-9530DN
Advanced Operation Guide
Resumo do conteúdo contido na página número 2
Resumo do conteúdo contido na página número 3
Contents Contents 1 Handling Paper...........................................................................................................................1-1 General Guidelines .....................................................................................................................1-2 Special Paper ..............................................................................................................................1-9 Media Type ...........................................
Resumo do conteúdo contido na página número 4
Contents ii ADVANCED OPERATION GUIDE
Resumo do conteúdo contido na página número 5
Introduction This guide has the following chapters: • 1 Handling Paper Explains how to choose, handle and load paper. • 2 Using the Operation Panel Explains how to use the operation panel to configure the printer. • 3 Fonts Shows the available fonts. • 4 Options Shows the available options. • 5 Computer Interface Describes the possible connections between the printer and your computer. • Glossary A Glossary of terms used is provided here. ADVANCED OPERATION GUIDE iii
Resumo do conteúdo contido na página número 6
Conventions This manual uses the following conventions: Convention Description Example Italic Typeface Used to emphasize a key Close the top cover. word, phrase or references to Refer to Toner Container additional information. Replacement on page 3-3. Courier Typeface Used to denote messages or Replace the waste toner box when names displayed on the the Check waste toner box operation panel. message is displayed. Bracket Bold Text Used to denote operation Press [Go]. Typeface panel keys. Bo
Resumo do conteúdo contido na página número 7
1 Handling Paper This chapter explains the following topics: • General Guidelines...................................................... 1-2 • Special Paper .............................................................. 1-9 • Media Type................................................................ 1-13 • Loading Paper........................................................... 1-14 ADVANCED OPERATION GUIDE 1-1
Resumo do conteúdo contido na página número 8
Handling Paper General Guidelines The printer is designed to print on high-quality copier bond paper (the kind used in ordinary dry copier machines), but it can also accept a variety of other types of paper within the limits specified below. NOTE: The manufacturer assumes no liability for problems that occur when paper not satisfying these requirements is used. Selection of the right paper is important. Using the wrong paper can result in paper jams, misfeeding, curling, poor print quality,
Resumo do conteúdo contido na página número 9
Handling Paper Paper Specifications The following table summarizes the basic paper specifications. Details are given on the following pages. Item Specification 2 Weight Cassette: 60 to 105 g/m (16 to 28 lb/ream) 2 MP tray: 45 to 200 g/m (12 to 53 lb/ream) Thickness 0.086 to 0.110 mm (3.4 to 4.3 mils) Dimensional accuracy ±0.7 mm (±0.0276 inches) Squareness of corners 90° ±0.2° Moisture content 4 to 6 % Direction of grain Long grain Pulp content 80 % or more Minimum and maximum paper sizes T
Resumo do conteúdo contido na página número 10
Handling Paper Selecting the Right Paper Laser printing is a process involving laser light, electrostatic discharge, toner, and heat. In addition, as the paper passes through the printer it undergoes considerable sliding, bending, and twisting motions. A high- quality printing paper matching the printer’s requirements withstands all these stresses, enabling the printer to turn out clean, crisp printed copies consistently. Remember that all paper is not the same. Some of the factors to consi
Resumo do conteúdo contido na página número 11
Handling Paper Cassette or MP tray Size Size MP tray ISO B5 176 × 250 mm B4 257 × 364 mm Executive 7-1/4 × 10-1/2 inches B5 182 × 257 mm Envelope C4 229 × 324 mm Oficio II 8-1/2 × 13 inches Hagaki 100 × 148 mm Oufuku Hagaki 148 × 200 mm Youkei 2 114 × 162 mm Youkei 4 105 × 235 mm 8K 273 × 394 mm 16K 197 × 273 mm Paper with other sizes (custom sizes) can also be fed from the MP tray. The minimum size paper for manual feed is 88 × 148 mm (3-1/2 × 5-13/16 inches), fed lengthwise. The maximum si
Resumo do conteúdo contido na página número 12
Handling Paper Paper Weight Equivalence Table The paper weight is listed in pounds (lb) and metric grams per square 2 meter (g/m ). The shaded part indicates the standard weight. 2 U. S. Bond Weight (lb) Europe Metric Weight (g/m ) 16 60 17 64 20 75 21 80 22 81 24 90 27 100 28 105 32 120 34 128 36 135 39 148 42 157 43 163 47 176 53 199 Thickness (Caliper) Thick paper is referred to as high-caliper paper and thin paper as low- caliper paper. The paper used with the printer should be neither ext
Resumo do conteúdo contido na página número 13
Handling Paper Moisture Content Moisture content is defined as the percent ratio of moisture to the dry mass of the paper. Moisture can affect the paper’s appearance, feedability, curl, electrostatic properties, and toner fusing characteristics. The moisture content of the paper varies with the relative humidity in the room. When the relative humidity is high and the paper absorbs moisture, the paper edges expand, becoming wavy in appearance. When the relative humidity is low and the paper
Resumo do conteúdo contido na página número 14
Handling Paper Electrostatic properties: During the printing process, the paper is electrostatically charged to attract the toner. The paper must be able to release this charge so that printed sheets do not cling together in the output tray. Whiteness: The contrast of the printed page depends on the whiteness of the paper. Whiter paper provides a sharper, brighter appearance. Quality control: Uneven sheet size, corners that are not square, ragged edges, welded (uncut) sheets, and crushed e
Resumo do conteúdo contido na página número 15
Handling Paper Special Paper This section explains printing on special paper. The page printer can use the following types of special paper. In this case, set the media type according to the table below. Paper type to be used Media type to be selected Colored paper Color Preprinted paper Preprinted Overhead projector Transparency transparencies Postcards Cardstock Envelopes Envelope Label Labels When using the above types of paper, be sure to use products that are specified for use with phot
Resumo do conteúdo contido na página número 16
Handling Paper Transparency Transparency must be able to withstand the heat of fusing during the printing process. It should satisfy the conditions given in the table below. Item Specification Tolerance of heat Must tolerate at least 190 °C (374 °F) Thickness 0.100 to 0.110 mm (3.9 to 4.3 mils) Material Polyester Dimensional accuracy ±0.7 mm (±0.0276 inches) Squareness of corners 90° ± 0.2° If transparency jams frequently, pull the top of the sheet very gently as it leaves the printer. Adh
Resumo do conteúdo contido na página número 17
Handling Paper Some label paper is manufactured with an extra margin of top sheet around the edge. Do not remove the extra top sheet from the carrier sheet until after printing is finished. Acceptable Unacceptable Top sheet Carrier sheet The table below lists the specifications for adhesive label paper. Item Specification 2 Weight of top sheet 44 to 74 g/m (12 to 20 lb/ream) 2 Composite weight 104 to 151 g/m (28 to 40 lb/ream) Thickness of top sheet 0.086 to 0.107 mm (3.9 to 4.2 mils) Com
Resumo do conteúdo contido na página número 18
Handling Paper Do not use envelopes that have an encapsulated liquid adhesive. Avoid long printing runs consisting of envelopes only. Extensive envelope printing can cause premature printer wear. To avoid jamming due to curled envelopes, do not leave more than approximately 10 printed envelopes stacked in the paper trays during multiple envelope printing. Thick Paper Fan the stack of paper and align the edges before loading them in the MP tray. Some types of paper have rough edges on the ba
Resumo do conteúdo contido na página número 19
Handling Paper Media Type The printer is capable of printing under the optimum setting for the type of paper being used. Setting the paper type for the paper source from the printer’s operation panel will cause the printer to automatically select the paper source and print in the mode best suited to that type of paper. A different paper type setting can be made for each paper source including the MP tray. Not only can preset paper types be selected, but it is also possible for you to defi
Resumo do conteúdo contido na página número 20
Handling Paper Loading Paper The following explains the produre for loading paper. Paper can be loaded into the two paper cassettes and the MP tray. IMPORTANT: Fan the paper, then tap it on a level surface. This avoid media jams or skewed printing. Loading Paper into the Paper Cassette 2 Up to about 500 sheets of standard paper (80 g/m ) can be loaded into the each paper cassette. Inch specifications Each paper cassette can be set to hold paper of any desired size from 11 × 17 to 5-1/2 × 8-
