Streszczenie treści zawartej na stronie nr. 1
X0KA02001-Y911-02
THERMAL PRINTER
FP-410
USER’S MANUAL
Streszczenie treści zawartej na stronie nr. 2
Federal Communications Commission Radio Frequency Interference Statement For United States Users This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radio frequency energy and, if not installed and used in accordance with t
Streszczenie treści zawartej na stronie nr. 3
TABLE OF CONTENTS 1. Appearance and Names of Components............................................... 2. Consumable Parts and AC Adapter ........................................................ 5 2-1. Roll Paper ........................................................................................... 5 2-2. AC adapter .......................................................................................... 6 3. Connecting Cables and AC Adapter .................................
Streszczenie treści zawartej na stronie nr. 4
1. Appearance and Names of Components Control panel This panel contains status lamps and operating switches. Top cover Open and close this cover to replace forms. Power switch Cover open lever This switch turns the printer power on and off. Pushing this lever down opens the top cover. 3
Streszczenie treści zawartej na stronie nr. 5
Interface connector (Serial interface) Drawer kick connector Power connector Interface connector (Parallel interface) Interface Connector (USB Interface Type-B) Power connector Drawer kick connector Interface Connector (USB Interface Type-A) 4 ENGLISH
Streszczenie treści zawartej na stronie nr. 6
2. Consumable Parts and AC Adapter Use the Thermal paper specified below. Using an AC adapter other than the specified model might cause a malfunction, fire, or electrical shock. 2-1. Roll Paper specification (Thermal paper) 0 (1)Paper width: 80 mm -1.0 (2)Outer roll diameter: 75~90µm φ102mm or less 90~150µm φ90mm or less (3)Thickness : 75~150µm (4)Core outer/inner diameter Paper Thickness Core outer
Streszczenie treści zawartej na stronie nr. 7
Note: Do not use a paper roll with frayed ends (rough paper edges). Otherwise, a printer error might occur. Depending on the type and thickness of the paper, it may be necessary to change the setting for print density. 2-2. AC adapter (option) Model name : CA02485-0020 Input : 100 to 240V AC, 50/60Hz Output : DC24V±5%, 1.5A 6 ENGLISH
Streszczenie treści zawartej na stronie nr. 8
3. Connecting Cables and AC Adapter To connect or disconnect these cables, turn off the power switches of the printer and all the devices to be connected to the printer, and then unplug the plug of the AC adapter power cable from the electrical outlet. Note: Interface cable and cable for AC Adapter is not included in the box. Please buy them when you need. 3-1. Connecting the Interface Cable Remove the connector cover at the rear of the printer. And connect the interf
Streszczenie treści zawartej na stronie nr. 9
Connector Cover USB Interface Cable Type-A USB Interface Cable Type-B 3-2. Connecting the Drawer Kick Cable Remove the connector cover at the rear of the printer. And connect the drawer kick cable to the rear connector. Note: Remove notch of connector cover with Nipper, to maintain the space for the cable of drawer kick cable. Otherwise, it would cause the failure because of cable broken. Connector cover Drawer kick cable
Streszczenie treści zawartej na stronie nr. 10
3-3. Connecting the AC Adapter Note: To connect or disconnect the AC adapter, turn off the power switches of the printer and all the devices to be connected to the printer. Then, unplug the plug of the AC adapter power cable from the electrical outlet. (1)Connect the AC adapter to the AC adapter power cable. Note: Use only the specified AC adapter and specified AC adapter power cable. (2)Connect the cable connector of the AC adapter to the printer connector. Note
Streszczenie treści zawartej na stronie nr. 11
3-4. Turning on the Power After the AC adapter is connected as explained in Section 3-3, "Connecting the AC Adapter," turn on the power switch at the side of the printer. The POWER lamp on the control panel lights. Power switch 10 ENGLISH
Streszczenie treści zawartej na stronie nr. 12
4. Control Panel 4-1. Control Panel POWER LED lamp Lights when the power switch is turned on and power is supplied to the printer. ERROR LED lamp Lights or blinks to indicate errors. FEED switch Pressing this switch once advances the paper one line. Holding down this switch advances paper continuously. 4-2. Error Indication The ERROR LED lamp lights or blinks when the printer is in the following states. Error status ERROR LED No paper (paper en
Streszczenie treści zawartej na stronie nr. 13
5. Loading the Roll Paper 5-1. Loading the roll paper (1)Push the cover open lever down, and open the top cover. Note: Thermal Head may be broken when Static Electricity impressed. Do not touch Thermal Head. (2) Peel off the pasted end of a new roll of paper. Note: Because the printer cannot print on the pasted portion, remove it completely. (3) Place the roll as shown below, and pull the leading edge of the paper forward. Paper r
Streszczenie treści zawartej na stronie nr. 14
Notes: 1. Do not use paper rolls that are deformed as shown below. Otherwise, a printer error, paper jam, or misaligned printing might occur. 2. If a paper roll is loose as shown below, remove any slack before using it. Using loose paper might cause a printer error, paper jam, or misaligned printing. 13
Streszczenie treści zawartej na stronie nr. 15
(4) Place the paper in the correct orientation, and carefully close the top cover. Notes: 1. Place the paper in the correct orientation. If the top cover is closed while the paper is not correctly in place, a paper jam or misaligned printing might occur. 2. To close the top cover, push the center (see arrow below) of the cover until it locks securely. If the cover is locked but the cover open lever is pressed down, the cover is not completely locked. In this case, p
Streszczenie treści zawartej na stronie nr. 16
5-2. Removing the Paper Roll (1) Push the cover open lever down, and open the top cover. Note: Thermal Head may be broken when Static Electricity impressed. Do not touch Thermal Head. (2) Remove the paper roll. 15
Streszczenie treści zawartej na stronie nr. 17
6. Preventing and Clearing Paper Jams 6-1. Preventing Paper Jams Do not touch the paper during ejection or before the paper is completely cut. Holding or pulling the paper by hand during ejection might cause a paper jam, incorrect cutting, or a feed error. 6-2. Clearing a Paper Jam If a paper jam occurs, remove the jammed paper as follows: (1) Turn off the printer power by turning off the power switch. (2) Press the cover open lever down, and open the top cover. (3) Remove the ja
Streszczenie treści zawartej na stronie nr. 18
7. Periodic Cleaning Print dropout might be caused by the presence of paper powder or dust. To avoid this problem, remove any black deposits of paper powder and dust from the paper holder, paper feed section, platen roller, and thermal head surfaces. This cleaning should be performed once a month, or as needed. 7-1. Cleaning the Thermal Head Use ethyl alcohol to remove any black deposits of paper powder and dust from the thermal head surfaces. Notes: 1. The thermal head is deli
Streszczenie treści zawartej na stronie nr. 19
8. Conditions for Use (1) High-duty printing might cause blurred printing. Use an appropriate duty that does not cause blurs. (2) To print an external character set, a bold font (e.g., Gothic) or bold lines should be selected. If a fine font (e.g., Mincho) or fine lines are selected, the print density might be insufficient. (3) To prevent enlarged or reduced printing due to uneven feeding after cutting paper or stopping printing, the paper must be advanced at least 1 mm (8 dots) be
Streszczenie treści zawartej na stronie nr. 20
(11) The use of labels might cause adhesive to stick to parts of the cutter, thermal head, and/or paper holder, causing cutting errors. To help prevent this from occurring, clean these parts at least once a month, or as need, with ethyl alcohol. (12) When changing the type of paper roll, clean the platen with ethyl alcohol before installing the new type to prevent errors such as feed errors. (13) The printer speed must not exceed four transactions (four cutting operations) per minute.
