Streszczenie treści zawartej na stronie nr. 1
<< Previous Next >>
Installing Your Multifunction
to Your Network for the First Time
PIXMA MG3220
Windows OS
1
Streszczenie treści zawartej na stronie nr. 2
<< Previous Next >> Installing Your Multifunction to Your Network for the First Time PIXMA MG3220 Windows OS Preparing to Connect My Multifunction to My Network 3 Network Requirements 3 Notes on Wireless Connection 4 Installing the Drivers & Software 5 2
Streszczenie treści zawartej na stronie nr. 3
Preparing to Connect My Multifunction << Previous Next >> To My Network Network Requirements Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network. Wireless Connection Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that configuration of the computer and access point or rout
Streszczenie treści zawartej na stronie nr. 4
Preparing to Connect My Multifunction << Previous Next >> To My Network An "Ad-hoc connection," which establishes a direct wireless connection between the computer and printer without using an access point, is not supported. A router or access point is required for your printer to be used on a wireless network. Notes on Network Connection • The configuration, router functions, setup procedures and security settings of the
Streszczenie treści zawartej na stronie nr. 5
Installing the Drivers & Software << Previous Next >> Software Installation To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk. The installation process takes about 20 minutes. (The installation time varies depending on the computer environment or the number of application software to be installed.) IMPORTANT • Log on as the administrator (or a member of the Administrators group).
Streszczenie treści zawartej na stronie nr. 6
Installing the Drivers & Software << Previous Next >> Installing the PIXMA MG3220 on Your Wireless Network If you are installing your printer on your network for the first time, a step-by-step walk through of the wireless setup is built in to the installation routine of the software that shipped with your PIXMA. *Insert the Setup CD-ROM that came with your printer into your CD-ROM drive and proceed through the easy to follow instructions. *If you don’t have or cannot
Streszczenie treści zawartej na stronie nr. 7
Installing the Drivers & Software << Previous Next >> On the Setup Procedure Selection screen (3-1) screen, select Wireless Setup Using the USB Cable. This is the recommended setup method. You will need to use the supplied USB cable Continue to follow any on-screen instructions until the Software Installation List appears. This screen is shown on the next page 7
Streszczenie treści zawartej na stronie nr. 8
Installing the Drivers & Software << Previous Next >> On the Software Installation List select any additional* software to install and click Next. *MP Drivers is required for installation and cannot be deselected. In addition, we recommend installing My Image Garden and Quick Menu in order to take full advantage of your printer’s features. *If you are using the downloaded ‘Mini Master setup’ file to install the printer, only the MP Drivers will be installed.
Streszczenie treści zawartej na stronie nr. 9
Installing the Drivers & Software << Previous Next >> The drivers and software will install. Continue to follow the on-screen instructions. Connect the supplied USB cable to the printer and computer when the Connect Cable screen appears The Connect Cable screen closes automatically after the printer is detected 9
Streszczenie treści zawartej na stronie nr. 10
Installing the Drivers & Software << Previous Next >> If the Detected Access Points List* appears, select the one you wish to connect to, enter the network key and click connect *This screen normally appears if you have multiple access points or multiple access points exist in your immediate area. 10
Streszczenie treści zawartej na stronie nr. 11
Installing the Drivers & Software << Previous Next >> If the Confirm Connection Access Point* screen appears, verify the information then click Yes *This screen normally appears when you have only one access point 11
Streszczenie treści zawartej na stronie nr. 12
Installing the Drivers & Software << Previous Next >> Disconnect the USB cable when the Disconnect Cable screen appears. Click Next Setup is now complete. Follow any remaining instructions to exit the setup program. 12
Streszczenie treści zawartej na stronie nr. 13
Installing the Drivers & Software << Previous Installing the PIXMA MG3220 on Your Wireless Network If you can’t find your CD-ROM, you may download the MG3200 series Mini Master Setup, which includes the same step-by-step installation as the CD-ROM, by following the instructions below: 1. Click here to access the MG3220 Drivers & Software page. 2. Select the operating system of your computer in the dropdown lists (see example below). 3. Expand the ‘Drivers’ section, if necessary, by cl
