Streszczenie treści zawartej na stronie nr. 1
INSTRUCTIONS
CANON ELECTRONICS INC.
1248, SHIMOKAGEMORI, CHICHIBU-SHI, SAITAMA 369-1892, JAPAN
CANON U.S.A. INC.
ONE CANON PLAZA, LAKE SUCCESS, N.Y. 11042, U.S.A.
CANON CANADA INC.
6390 DIXIE ROAD, MISSISSAUGA, ONTARIO L5T 1P7, CANADA
CANON EUROPA N.V.
BOVENKERKERWEG 59-61, P.O.BOX 2262, 1180 EG AMSTELVEEN, THE NETHERLANDS
CANON LATIN AMERICA, INC.
703 WATERFORD WAY, SUITE 400 MIAMI, FLORIDA 33126, U.S.A.
CANON AUSTRALIA PTY. LTD.
1 THOMAS HOLT DRIVE, NORTH RYDE, SYDNEY. N.S.W, 2113. AUSTRALIA
C
Streszczenie treści zawartej na stronie nr. 2
Connecting the Scanner to a Computer Connect the CR-180II to a computer as follows. Be sure to install the software before connecting the scanner to a computer. ● If you connect the computer and turn on the CR-180II before installing the software, the following wizard appears. If this happens, click [Cancel] to close the wizard’s window, turn off the CR-180II and then install the software. Wizard Screen (Windows 2000) 1. Install the software Install the Scanning Utility for CR-180II in the setup
Streszczenie treści zawartej na stronie nr. 3
READ CAREFULLY BEFORE OPENING THE SEALED DISK PACKAGE CANON SOFTWARE LICENSE AGREEMENT IMPORTANT-READ THIS AGREEMENT BEFORE OPENING THE SEALED DISK PACKAGE! BY OPENING THE SEALED DISK PACKAGE, YOU ARE DEEMED TO AGREE TO BE BOUND BY THIS AGREEMENT. This legal document is a license agreement between you and Canon Electronics Inc. ("Canon"). BY OPENING THE SEALED DISK PACKAGE, YOU ARE DEEMED TO AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT,
Streszczenie treści zawartej na stronie nr. 4
FCC REGULATIONS (For 120V models) This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to
Streszczenie treści zawartej na stronie nr. 5
INTRODUCTION Thank you for purchasing the Canon Check Reader CR-180II. Please read this manual thoroughly before operating the machine in order to familiarize yourself with its capabilities, and to make the most of its many functions. After reading this manual, store it in a safe place for future reference. Conventions This manual uses the following symbols and indications. Before you start reading this manual, read and familiarize yourself with the meanings of the symbols shown below. Warnings
Streszczenie treści zawartej na stronie nr. 6
CONTENTS INTRODUCTION..........................................................................................1 Conventions ................................................................................................ 1 Safety Precautions .....................................................................................4 Daily Maintenance ...................................................................................... 4 Installation Location .........................................
Streszczenie treści zawartej na stronie nr. 7
Chapter 3 Software 3.1 How to Use the Software................................................................ 32 How to Use the Scanning Utility ............................................................... 32 How to Use the ISIS/TWAIN Driver .......................................................... 34 3.2 Uninstalling the Software................................................................35 Chapter 4 Document Feeding and Scanning 4.1 Documents ..........................................
Streszczenie treści zawartej na stronie nr. 8
Safety Precautions Daily Maintenance When you are working around the scanner, follow these precautions to avoid fire and electrical shock. ■ Never install and operate the scanner near flammable substances, such as alcohol, paint thinner, benzene, or any other type of volatile solution. WARNING ■ Never damage or modify the power cord, and never place heavy objects on the power cord. ■ Always make sure that your hands are dry when you are handling the power cord or plug. Never grasp the plug when
Streszczenie treści zawartej na stronie nr. 9
■ To avoid damage to the scanner, never place the scanner on an unstable or vibrating CAUTION surface. The scanner may tip or fall over, causing injury. ■ To avoid overheating and causing a fire, never block the air vents on the back of the scanner. ■ Keep all liquids, beverages, or any type of liquid, and clips, staples, necklaces, or other metal objects away from the scanner. If you accidentally spill liquid or drop a metal object into the scanner, turn OFF the power immediately and disconnect
Streszczenie treści zawartej na stronie nr. 10
Installation Location More than 3.9" (100 mm) More than 5.9" (150 mm) More than 25.6" (650 mm) For operation, maintenance and ventilation, make sure that there is enough space around the scanner, as shown in the illustration above. Avoid placing the scanner in the following places. It may cause a malfunction and adversely affect the scanner or your computer. • Places exposed to direct sunlight If installation in such places is unavoidable, provide a curtain or similar object to shade the scann
Streszczenie treści zawartej na stronie nr. 11
Power Supply • Be sure to connect the scanner to an AC 220-240V (50/60 Hz) or AC 120V (60 Hz) power supply, according to your region’s requirements. • Make sure that the scanner is connected to an independent power outlet. Do not plug the scanner into an outlet shared with another device. If you use an extension cable, pay attention to the total amperage of the cable. • If you are unsure of anything relating to the power supply, contact your dealer, service representative, or your local power co
Streszczenie treści zawartej na stronie nr. 12
Streszczenie treści zawartej na stronie nr. 13
Chapter 1 Introduction to the CR-180II This chapter describes the features of the scanner, what comes packaged in the box, and the names and functions of parts on the scanner. 1.1 Features of the CR-180II ....................10 1.2 Packaging: What Is in the Box? ........ 12 1.3 Part Names ..........................................13 Front View ................................................ 13 Rear View ................................................ 14 Connectors .............................
Streszczenie treści zawartej na stronie nr. 14
Chapter 1 Introduction to the CR-180II Features of the CR-180II The Canon Check Reader CR-180II is a scanner with magnetic heads that can read checks and other documents that are printed with MICR (Magnetic Ink Character Recognition) compatible fonts and is capable of OCR (Optical Character Recognition). The CR-180II is compact and can handle large volumes of checks at a speed of 180 ppm. Features ● High speed scanning The CR-180II performs high-speed scans of check size documents at 180 ppm (20
Streszczenie treści zawartej na stronie nr. 15
1.1 Features of the CR-180II 1 ● Automatic separator mechanism Scanned documents are automatically ejected to one of two pockets based on separation conditions. ● Double feed detection The scanner detects double fed documents. ● Drop out color This function enables drop out scanning of a specific color in the document. ● Imprinter is standard equipment An imprinter mechanism, to print text on documents as they are scanned, comes standard equipped with the scanner. The imprinter’s ink cartridge
Streszczenie treści zawartej na stronie nr. 16
Chapter 1 Introduction to the CR-180II Packaging: What Is in the Box? Make sure that you have everything. Check every item you have removed from the box. If any items are missing, contact your local authorized Canon dealer. Document Feed Guide CR-180II Jogger Support *1 Instructions (This Manual) Setup Disc Power Cord *2 Warranty Card USB Cable *1 The power cord varies according to the country of purchase. *2 For the United States and Canada only. 12
Streszczenie treści zawartej na stronie nr. 17
1.3 Part Names 1 Part Names This section describes the names and functions of each part. Before you connect the CR-180II, take a few minutes to familiarize yourself with the main parts and their functions. ◆ Front View Jogger Support Top Cover Use the jogger support if the stack of documents exceeds the loading limit mark. (See “Scan Procedure,” Document Feed Guide on p.41.) Attach the document feed guide Document Brace to hold large document stacks in place. (See “Scan Procedure,” on p.
Streszczenie treści zawartej na stronie nr. 18
Chapter 1 Introduction to the CR-180II ◆ Rear View Power Cord Connector Connect the power cord provided with the scanner to this connector. Connectors Air Vent To avoid overheating and causing a fire, never block the air vents on the back of the scanner. CAUTION ◆ Connectors USB connector DIP switch SCSI connector Connect a Hi-Speed USB 2.0 This switch is for setting the Connect a half-pitch 50 pin compatible cable. (See “USB SCSI ID. (See “Setting the SCSI cable. (See “SCSI Connections,”
Streszczenie treści zawartej na stronie nr. 19
Chapter 2 Preparation Before Use This chapter describes how to prepare the scanner to scan documents. 2.1 Setting Up the Scanner ......................16 2.2 Checking Your Operating Environment....................................... 17 2.3 Installing the Software .......................19 Installing the Scanning Utility................... 19 Installing the ISIS/TWAIN Driver ............. 21 2.4 Connecting the Scanner to a Computer.............................................23 USB Connections ..
Streszczenie treści zawartej na stronie nr. 20
Chapter 2 Preparation Before Use Setting Up the Scanner Perform the following steps to set up the CR-180II. Refer to the section for each step for details about that step. 1. Check your operating environment (See “Checking Your Operating Environment,” on p.17.) d 2. Install the software (See “Installing the Software,” on p.19.) Install the Scanning Utility provided with the CR-180II. d 3. Connect the scanner to a computer (See “Connecting the Scanner to a Computer,” on p.23.) You need to turn of
