Streszczenie treści zawartej na stronie nr. 1
Two-Line Speakerphone
with Call Waiting Caller ID
User’s Guide
Please read this manual before
operating this product for the
first time.
Model 25202
Streszczenie treści zawartej na stronie nr. 2
Important Information Equipment Approval Information Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. Yo
Streszczenie treści zawartej na stronie nr. 3
Important Information The telephone company may make changes in its communications facilities, equipment, operations or procedures where such action is required in the operation of its business and not inconsistent with FCC Rules and Regulations. If these changes are expected to affect the use or performance of your telephone equipment, the telephone company must give you adequate notice, in writing, to allow you to maintain uninterrupted service. Interference Information This device compli
Streszczenie treści zawartej na stronie nr. 4
Table of Contents r oringest the Dtsefaul ...................................16 Iantmport IItnforma on .....................2 t ElEH p E on o E p tIra on ...................................17 EquIpmEnt a pproval IItnforma on ...................2 m aking Calls with the h anDset ....................17 IntErfErEncE IItnforma on ...............................3 m aking Calls with the s PeakerPhone ...........17 l IE c Ins ng ......................................................3 m aking Calls with
Streszczenie treści zawartej na stronie nr. 5
Table of Contents VoiCe m essaging .............................................22 d IrEct a ccEss m Emory & d IrEoryct m Emory 26 t ElEH p E on o pEtIra on ......................22 s oringt a n ame anD n B um er in m emory .....26 c allEr Id (cId) .........................................23 r eViewing s oreD t n ames & n B um ers ...........26 s ummary s Creen .............................................23 m Emory ........................................26 r eCV ei ing D an s oringt CD i r C e
Streszczenie treści zawartej na stronie nr. 6
Introduction CAUTION: When using telephone equipment, there are basic safety instructions that should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference. Your Caller ID phone stores and displays specific information, provided by your local tele- phone company, to subscribers of Caller ID or similar caller identification services. Your Caller ID phone enables you to: • Identify callers before you answer the phone. • View
Streszczenie treści zawartej na stronie nr. 7
Connections and Setup Base Layout NEW CALL indicator REVIEW button SELECT/SAVE button EXIT button MEMORY buttons DELETE button INTERCOM/MEMORY LOG INT. DIRECTORY 1 DIRECTORY button MEM. INT. 2 MEM. MENU INT. VOICE MAIL 1 button 3 MEM. MENU button INT. STORE 4 MEM. INT. 5 MEM. INT. DELETE EXIT SELECT/SAVE DIAL 6 STORE button MEM. NEW CALL INT. 7 MEM. VOICE MAIL 1 REVIEW INT. VOICE MAIL 2 button 8 MEM. VOICE MAIL 2 CONFER INT. DIAL button ABC DEF 9 1 2 3 MEM. INT. DND 10 MEM. GHI JKL MNO 4 5 6 INT
Streszczenie treści zawartej na stronie nr. 8
Connections and Setup Parts Checklist Make sure your package includes the following items: INTERCOM/MEMORY LOG DIRECTORY 1 INT. MEM. INT. 2 MEM. MENU INT. 3 MEM. INT. STORE 4 MEM. INT. 5 MEM. DELETE EXIT SELECT/SAVE DIAL INT. NEW CALL 6 MEM. INT. 7 MEM. VOICE MAIL 1 REVIEW INT. 8 MEM. VOICE MAIL 2 CONFER INT. 1 2 ABC 3 DEF 9 MEM. DND 10 INT. MEM. 4 GHI 5 JKL 6 MNO INT. REDIAL PAUSE LINE 2 11 MEM. 12 INT. 7 PQRS 8 TUV 9 WXYZ MEM. INT. 13 MEM. VOLUME INT. * TONE 0 OPER # LINE 1 14 MEM. INT. HANDSE
Streszczenie treści zawartej na stronie nr. 9
Connections and Setup Installing the Phone 1. Choose an area near an electrical outlet and telephone wall jack. Your phone should be placed on a level surface, such as a table top or desk. 2. Install 3 AA-size alkaline batteries (not included) for back up power in the event of a power failure. •Use a screwdriver to loosen and lift up the battery compartment door located on the bottom of thephone. • Insert the batteries as shown on the diagram inside the battery compartment. • Snap
Streszczenie treści zawartej na stronie nr. 10
Connections and Setup 5 If you have two telephone lines installed on a single jack, plug one end of the straight telephone line cord into the jack marked LINE 1+2 on the back of the base. Plug the other end into the 2-line wall jack. If you have two separate telephone line jacks, plug one telephone line cord into the jack marked LINE 1+2 and another cord into the jack marked LINE 2. Plug the other end of each line cord into separate wall jacks. NOTE: To use two line, you must have two
Streszczenie treści zawartej na stronie nr. 11
Connections and Setup Data Port This phone has a DATA PORT jack to connect an auxiliary phone device, such as a fax machine, computer modem, answering machine, or even a cordless phone. The DATA PORT switch on the back of the phone controls the DATA PORT jack so you can choose line 1 or line 2. Use the DATA PORT jack to hook up your fax machine, for example, and then set the DATA PORT switch to 2 in order to receive faxes on the phone number for line 2. If you are talking to someone on lin
Streszczenie treści zawartej na stronie nr. 12
Connections and Setup Programming the Telephone Display Language You may set the display language to English, French, or Spanish. The default is English. 1. Press the MENU button. LANGUAGE is displayed 2. Press SELECT. 3. Use the REVIEW 3 or 4 button to select the language. 4. When finished, press SELECT to save. To start over, press EXIT to return to the LANGUAGE menu and repeat step 2. Manually Setting the Date and Time NOTE: If you do not manually set the time and date, it is automatically s
Streszczenie treści zawartej na stronie nr. 13
Connections and Setup Flash Time Depending on the services you have with the phone company, you may need to adjust the flash timing. It can be set from 100ms or 600ms. The default is 600ms. 1. Press the MENU button. 2. Use the REVIEW 3 or 4 to scroll to PHONE OPTIONS. 3. Press SELECT. 4. Use the REVIEW 3 or 4 to scroll to FLASH TIME. 5. Press SELECT. 6. Use the REVIEW 3 or 4 to scroll to the desired setting. 7. Press SELECT to save. To start over, press EXIT to return to the FLASH TIME menu. H
Streszczenie treści zawartej na stronie nr. 14
Connections and Setup Call Alert Tone When the call alert tone is turned ON, you hear a call alert tone when you are on the phone and you receive a call on the other line. If you prefer to have incoming calls not interrupt or disturb your ongoing conversation, set the Call Alert Tone to OFF. The default is ON. 1. Press the MENU button. 2. Use the REVIEW 3 or 4 button to scroll to PHONE OPTIONS. 3. Press SELECT button. 4. Use the REVIEW 3 or 4 button to scroll to CALL ALERT. 5. Press SEL
Streszczenie treści zawartej na stronie nr. 15
Connections and Setup Regional Area Codes Depending on your area, you may need to set regional area codes. These are needed in order for the phone to determine the number format to display when a valid CID signal is received. Calls received that match any of the regional area codes display as 10 digits. If the number is not displayed correctly, the phone may not be able to dial back the number. You can store up to 6 regional area codes. You may need to use this feature if you have: • Multip
Streszczenie treści zawartej na stronie nr. 16
Connections and Setup Voice Mail Access Codes You can program a voice mail access code for each telephone line for quick access to your voice mail. 1. Press the MENU button. 2. Use the REVIEW 3 or 4 button to scroll to VM CODE. 3. Press SELECT. 4. Use the REVIEW 3 or 4 button to scroll between L1 VM CODE and L2 VM CODE. 5. Press SELECT. 6. Use the touch-tone pad to enter your voice mail access phone number. • Usethe REVIEW 3 or 4 buttonto move the cursorin the display . •Use
Streszczenie treści zawartej na stronie nr. 17
Telephone Operation Telephone Operation Making Calls with the Handset 1. Pick up the handset and the phone automatically selects an open line. 2. Wait for a dial tone. 3. Dial a phone number. 4. Hang up the handset when finished. Making Calls with the Speakerphone 1. Press the SPEAKER button and the phone automatically selects an open line. 2. Wait for a dial tone. 3. Dial a phone number. 4. Press SPEAKER when finished. Making Calls with the Optional Headset 1. Connect a headset to the HEADSET
Streszczenie treści zawartej na stronie nr. 18
Telephone Operation Receiving Calls with the Handset When the phone rings, the corresponding line’s indicator flashes rapidly. 1. Pick up the handset (your phone automatically selects the ringing line). 2. When you are finished, hang up the handset. Receiving Calls with the Speakerphone When the phone rings, the corresponding line’s indicator flashes rapidly. 1. Press the SPEAKER button. The speakerphone turns on and automatically selects a line. 2. When you are finished, press SPEAKER. Receivin
Streszczenie treści zawartej na stronie nr. 19
Telephone Operation Pre-Dialing Telephone Numbers Pre-dialing lets you to enter , check , and edit a telephone number before engaging the line. There are several ways to pre-dial a telephone number: •Manually enter the telephone number, or •Press one of the 16 memory location buttons, or •Press DIRECT ORY, followed by theREVIEW 3 or 4 button to search the phone book memory. •Press the REVIEW 3 or 4 buttons toscroll the CID memory, or •Press the REDIAL button. The
Streszczenie treści zawartej na stronie nr. 20
Telephone Operation Hold Placing a Call on Hold 1. Press HOLD. The indicator for the line on hold flashes green. 2. Hang up or press another line button. Releasing a Call from Hold Press the line button for the call on hold. The phone automatically goes into speaker- phone mode. NOTE: If you want to change modes, lift the handset to switch to the handset, or press the HEADSET button to use the headset. Flash Use the FLASH button to activate custom calling services such as Call Waiting, which is
