Streszczenie treści zawartej na stronie nr. 1
ENGLISH
OWNER'S MANUAL
NETWORK MONITOR
Please read the safety information carefully before using the product.
Network Monitor Models
N195WU
N225WU
www.lg.com
Streszczenie treści zawartej na stronie nr. 2
ENGLISH ENG Table of Contents 2 TABLE OF CONTENTS 3 ASSEMBLING AND 25 TROUBLESHOOTING PREPARING 3 Unpacking 27 PRODUCT SPECIFICATION 4 Parts and buttons 29 Preset Mode 7 Lifting and moving the Monitor set 29 Power Indicator 7 Setting Up the Monitor set 7 - Attaching the Stand Base 8 - Detaching the stand base 30 PROPER POSTURE 8 - Adjusting the stand body 30 Proper posture for using the monitor 9 - Adjusting the angle 9 - Mounting on a table 10 - Using the Kensington locking device 11 - Detachi
Streszczenie treści zawartej na stronie nr. 3
ENGLISH ENG ASSEMBLING AND PREPARING 3 ASSEMBLING AND PREPARING Unpacking Please check whether all the components are included in the box before using the product. If there are missing components, contact the retail store where you purchased the product. Note that the product and components may look different from those shown here. User Manual/ Software Installation CD/ Power Cord AC/DC adaptor Card Stand Base 15-pin D-SUB Signal Cable A-B Type USB Cable CAUTION y Only use an approved LG pow
Streszczenie treści zawartej na stronie nr. 4
ENGLISH ENG ASSEMBLING AND PREPARING 4 Parts and buttons N195WU Power Indicator y LED On : Power is on y LED Off: Power is off (Power Button) Input Connectors (See p.15) Front Buttons Input Connectors (See p.13 to 14) NOTE y Keep radio away 10 cm from the front side buttons and power button.
Streszczenie treści zawartej na stronie nr. 5
ENGLISH ENG ASSEMBLING AND PREPARING 5 N225WU Power Indicator y LED On : Power is on y LED Off: Power is off (Power Button) Input Connectors (See p.15) Front Buttons Input Connectors (See p.13 to 14) NOTE y Keep radio away 10 cm from the front side buttons and power button.
Streszczenie treści zawartej na stronie nr. 6
ENGLISH ENG ASSEMBLING AND PREPARING 6 Button Description MENU Activates the main menu. OSD Lock/Unlock Locks/unlocks the OSD screen. Functions y To lock the OSD screen, press and hold the MENU button for several seconds. The "OSD LOCKED" message will be displayed and the screen will be locked. y To unlock the OSD screen, press and hold the MENU button again for several seconds. The "OSD UNLOCKED" message will be displayed and the screen will be unlocked. SMART+ Use this button to enter AUT
Streszczenie treści zawartej na stronie nr. 7
ENGLISH ENG ASSEMBLING AND PREPARING 7 Lifting and moving the Setting Up the Monitor set Monitor set Attaching the Stand Base When moving or lifting the Monitor set, read the following to prevent the Monitor set from being Place the monitor's screen face down. 1 scratched or damaged and for safe transportation regardless of its type and size. CAUTION y To protect the screen from scratches, cover the surface with a soft cloth. CAUTION Avoid touching the screen at all times, as this y may r
Streszczenie treści zawartej na stronie nr. 8
ENGLISH ENG ASSEMBLING AND PREPARING 8 Detaching the stand base Adjusting the stand body Place the monitor's screen face down. Place the monitor's screen face down. 1 1 To protect the screen from scratches, cover the To protect the screen from scratches, cover the surface with a soft cloth. surface with a soft cloth. Using a coin, turn the screw in the stand base Press the button as shown and pull the stand 2 2 counterclockwise. Detach the stand base from body up. the stand body. Stand Body
Streszczenie treści zawartej na stronie nr. 9
ENGLISH ENG ASSEMBLING AND PREPARING 9 Adjusting the angle Mounting on a table Place the monitor mounted on the stand base Lift the monitor and place it on the table in an 1 1 in an upright position. upright position. Install at least 10 cm away from the wall to ensure sufficient ventilation. Adjust the angle of the screen. The angle of the 2 screen can be adjusted up to 15° forwards and 5° backwards for a comfortable viewing experi- ence. 10 cm - 5 15 10 cm 10 cm 10 cm Front Side Rear Si
Streszczenie treści zawartej na stronie nr. 10
ENGLISH ENG ASSEMBLING AND PREPARING 10 Using the Kensington locking device The connector for the Kensington lock is located on the rear of the monitor. For more information on installation and usage, refer to the Kensington lock user manual or visit the website at http://www.kensington.com. Connect the monitor to the table with the Kensing- ton lock cable. NOTE y Using the Kensington lock is optional. The accessories can be purchased at your local electronics store.
Streszczenie treści zawartej na stronie nr. 11
ENGLISH ENG ASSEMBLING AND PREPARING 11 Detaching the stand body Installing the wall mount plate This monitor has a VESA compatible mount on the Place the monitor's screen face down. To 1 back. Most mounts will require an LG mounting protect the screen from scratches, cover the plate. surface with a soft cloth. Using a screwdriver, Remove the Cover and 2 Place the monitor's screen face down. To 1 detach from the monitor. protect the screen from scratches, cover the surface with a soft c
Streszczenie treści zawartej na stronie nr. 12
ENGLISH ENG ASSEMBLING AND PREPARING 12 Mounting on a wall Model N195WU N225WU Install the monitor at least 10 cm away from the VESA (A x B) 75 x 75 wall and leave about 10 cm of space at each side Stand Screw M4 of the monitor to ensure sufficient ventilation. De- 4 Required Screw tailed installation instructions can be obtained from RW120 Wall Mount Plate your local retail store. Please refer to the manual (Optional) to install and set up a tilting wall mounting bracket. 10 cm y VESA (A
Streszczenie treści zawartej na stronie nr. 13
ENGLISH ENG USING THE MONITOR SET 13 USING THE MONITOR SET Using Primary Station CAUTION y This monitor supports the *Plug and Play y Connect the input signal feature. cable and tighten in the *Plug and Play: A feature that allows you to direction of the arrow. To add a device to your computer, without having prevent disconnection to reconfigure anything or install any manual secure the cable tightly. drivers. y Do not press on the screen for a prolonged time. This may cause image disto
Streszczenie treści zawartej na stronie nr. 14
ENGLISH ENG USING THE MONITOR SET 14 USB cable connection to Daisy Using Standard Stations Chain USB cable connection - PC The digital signal is transmitted from the PC to the monitor through the USB cable. Connect monitors The digital signal is transmitted from the PC to using the A-B type USB cable provided as shown the monitor through the USB cable. Connect the in the picture below. PC and the monitor using the A-B type USB cable provided as shown in the picture below. Back of the pr
Streszczenie treści zawartej na stronie nr. 15
ENGLISH ENG USING THE MONITOR SET 15 Peripheral device connection NOTE Connect peripheral devices to the monitor using y Peripheral devices are sold separately. USB, headphone, speaker, and microphone ports. y The USB ports on the bottom of the moni- tor can be used to connect the keyboard, mouse, and other USB devices. But, USB Right ports on the right of the monitor can't be used to connect the keyboard. y Headphones, speakers or microphone may not work normally, depending on the server
Streszczenie treści zawartej na stronie nr. 16
ENGLISH ENG CUSTOMIZING SETTINGS 16 CUSTOMIZING SETTINGS Accessing The Main Menus Press any button on the front of the monitor to display the MONITOR SETUP OSD menu. 1 2 Press to select the desired menu item. To change the settings of the selected item press the buttons on the front of the monitor. 3 To return to the upper menu or set other menu items, use the up arrow ( ) button. Select EXIT to leave the OSD menu. 4 N195WU N225WU Front Side Buttons AUTO (See p.24) MENU (See p.17) EXIT (See p
Streszczenie treści zawartej na stronie nr. 17
ENGLISH ENG CUSTOMIZING SETTINGS 17 MENU Settings Picture MENU PICTURE Press any button on the front of the monitor to 1 display the MONITOR SETUP OSD menu. BRIGHTNESS Press the MENU button to display the options 2 CONTRAST in the OSD menu. SHARPNESS 3 Set the options by pressing the buttons on the front of the monitor. Select EXIT to leave the OSD menu. 4 EXIT To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. Analog Menu
Streszczenie treści zawartej na stronie nr. 18
ENGLISH ENG CUSTOMIZING SETTINGS 18 Color MENU COLOR Press any button on the front of the monitor to 1 display the MONITOR SETUP OSD menu. COLOR TEMP PRESET Press the MENU button to display the options 2 PRESET WARM in the OSD menu. RED GREEN 3 Set the options by pressing the buttons on the BLUE front of the monitor. GAMMA GAMMA 1 Select EXIT to leave the OSD menu. 4 EXIT To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. An
Streszczenie treści zawartej na stronie nr. 19
ENGLISH ENG CUSTOMIZING SETTINGS 19 Display MENU DISPLAY Press any button on the front of the monitor to 1 display the MONITOR SETUP OSD menu. HORIZONTAL Press the MENU button to display the options 2 VERTICAL in the OSD menu. CLOCK PHASE Set the options by pressing the buttons on the 3 front of the monitor. Select EXIT to leave the OSD menu. 4 EXIT To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. Analog Menu USB Descrip
Streszczenie treści zawartej na stronie nr. 20
ENGLISH ENG CUSTOMIZING SETTINGS 20 Volume MENU VOLUME Press any button on the front of the monitor to 1 display the MONITOR SETUP OSD menu. Press the MENU button to display the options 2 in the OSD menu. 3 Set the options by pressing the buttons on the front of the monitor. Select EXIT to leave the OSD menu. 4 EXIT To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. Analog Menu USB Description (D-SUB) VOLUME To adjust the v
