Streszczenie treści zawartej na stronie nr. 1
User’s Manual
Color LCD Monitor
Streszczenie treści zawartej na stronie nr. 2
CONTENTS PRECAUTIONS __________________________ 4 INTRODUCTION _________________________ 9 About this Manual .................................................... 9 Package Contents .................................................... 9 Controls & Connectors........................................... 10 1 INSTALLATION _______________________ 11 1-1 Connecting up ................................................. 11 PC Settings .......................................................................
Streszczenie treści zawartej na stronie nr. 3
3 MAKING USE OF USB _________________ 34 E Setup Procedure ............................................................. 34 Trouble Shooting ............................................................. 36 4 TROUBLESHOOTING _________________ 37 5 CLEANING __________________________ 41 6 SPECIFICATIONS _____________________ 42 APPENDIX______________________________ i Pin Assignment ........................................................ ii Preset Timing Chart ....................................
Streszczenie treści zawartej na stronie nr. 4
PRECAUTIONS IMPORTANT! * The manufacturer is not responsible for damage or malfunction caused by improper connection. The power cord should be connected directly to a standard wall power outlet. Location of the caution statements on the back panel. Risk of electric shock. Do not open. Risque de choc electrique. Ne pas ouvrir. Gefahr des elektrischen schlages. Rückwand nicht entfernen. The equipment must be connected to a grounded main outlet. Jordet stikkontakt skal benyttes nár apparatet tilk
Streszczenie treści zawartej na stronie nr. 5
WARNING E • If the LCD monitor begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections immediately and contact your dealer for advice. Attempting to use a malfunctioning LCD monitor can be dangerous. Do not dismantle the cabinet or modify the LCD monitor. Dismantling the cabinet or modifying the monitor may result in electric shock or burn. Keep small objects away from the LCD monitor. Small objects may accidentally fall through the v
Streszczenie treści zawartej na stronie nr. 6
The equipment must be connected to a grounded main outlet. Failure to do this may result in an electric shock. Handle the power cord with care. * Do not place the cord underneath the LCD monitor or other heavy objects. * Do not pull on the cord. * Do not bend, bundle or tie up the cord. * Never attempt to repair a damaged cord. If the power cord becomes damaged, stop using it. Use of a damaged cord may result in fire or electric shock. To disconnect the power cord, grasp the plug firmly a
Streszczenie treści zawartej na stronie nr. 7
Set the LCD monitor in an appropriate location. * Do not install in a dusty or humid environment. E * Do not place near water. * Do not place in a location where light shines directly on the screen. * Do not place near heat generating devices or a humidifier. CAUTION At the end of the day, or if you plan to leave the LCD monitor unused for an extended period, turn off the main power switch and disconnect the power cord from the wall socket so that no power connections are made. To ensure s
Streszczenie treści zawartej na stronie nr. 8
Use an easily accessible power outlet. This will ensure that you can disconnect the power quickly in case of a problem. Do not block the ventilation slots on the cabinet. * Do not place books or any other papers on the ventilation slots. * Do not install the monitor in a closed space. * Do not use the monitor laying down or upside down. * Do not remove the tilt-swivel stand. Using the monitor in this way blocks the ventilation slots and prevents proper airflow, leading to fire or other damag
Streszczenie treści zawartej na stronie nr. 9
INTRODUCTION About This Manual E This manual explains the precautions, features, specifications, and operation of your EIZO LCD monitor. For convenience, a “ScreenManager Quick Reference” guide has been included which shows how to implement basic adjustments with the ScreenManager utility. Package Contents Power Cord Signal Cable (MD-C87/100) Connector Cover 4 of 4 mm x 12 mm mounting screws Rear Cover EIZO LCD Utility Disk LCD Monitor ® Viewing Angle L660 L661 L680 (attached to the (for Window
Streszczenie treści zawartej na stronie nr. 10
Enter Button Controls & Connectors Control Buttons Front Up, down, right and left buttons are used to enter adjustments and settings when using the ScreenManager menu. Power Button Switches the monitor’s power ON and OFF only when the main power is ON. Power Indicator Indicates the power-on status in the following ways: Green (Solid): Power is ON (Flashing): Power is switching off in 15 minutes Power (See page 32.) Terminal Yellow (Solid): Power Saving Mode Covers for (Flashing): Power is OFF th
Streszczenie treści zawartej na stronie nr. 11
1 INSTALLATION 1-1 Connecting up E PC Settings Before connecting your PC to the LCD monitor, change the display screen settings (resolution and frequency) in accordance with those below. fH: 27 kHz-82 kHz fV: 50 Hz-85 Hz The maximum resolution of this LCD monitor is 1280 x 1024 at a maximum fV of 75 Hz. ® Using the LCD monitor with Windows 95/98 A Monitor information file is saved in the EIZO LCD Utility Disk included in the package. It includes all the LCD required information for best ope
Streszczenie treści zawartej na stronie nr. 12
(4) Plug the other end of the cable into the video connector on the rear of the PC. Standard PC graphics board D-Sub mini15 pin D-Sub mini15 Standard PC pin graphics board Signal Cable (enclosed) Macintosh D-Sub mini15 pin D-Sub mini15 Macintosh G3 pin (Blue & White) Signal Cable (enclosed) D-Sub mini15 D-Sub 15 D-Sub mini15 pin pin Macintosh pin Signal Cable (enclosed) Macintosh Adapter DSCR-153 (optional) (5)Plug the power cord into the power connector on the rear of the LCD monitor. (6)Replac
Streszczenie treści zawartej na stronie nr. 13
Do your part to conserve energy, turn off the monitor when you E are finished using it. Attaching an Arm Stand to the Monitor WARNING When attaching the monitor to the mount, use the enclosed screws and tighten them securely. When reattaching the monitor to the tilt stand, use the screws that was attached to the monitor. By not doing so may result in injury or failure of the monitor. To attach the mount to the monitor, please read the instruction manual of the mount. Use a VESA approve
Streszczenie treści zawartej na stronie nr. 14
(2)Place and fix a mount or an arm-stand to the monitor securely. Mounting Screws (enclosed): 4x12 (mm) Connecting two PCs to the Monitor (Example) Macintosh Adapter DSCR-153 (optional) Apple PC compatible Macintosh Signal Cable (Enclosed) The EIZO L660/L661/L680 has two video input signal connectors (2 x D-sub mini 15 pin). The priority switch system allows the user to assign priority to either input signal. Contact EIZO dealers for information about optional cables. Be sure that the monit
Streszczenie treści zawartej na stronie nr. 15
2 USING THE SCREENMANAGER 2-1 How to use the ScreenManager E About ScreenManager As shown on the display, the ScreenManager is used to adjust the LCD monitor. Adjustments are made using the Enter and Control buttons (up, down, right and left) located on the front panel. Enter Button Control Buttons ScreenManager Menus ScreenManager consists of a main menu and six sub menus: “Screen”, “Color”, “PowerManager”, “Others”, “Information” and “Language.” Animated icons on each menu allows for easy ad
Streszczenie treści zawartej na stronie nr. 16
Sub menus Functions Reference page 19 page 26 page 28 page 30 This menu shows the current ScreenManager settings. The menu contains three pages. Pressing the ENTER key displays the following information: Page 1: “Screen” menu settings Page 2: “Color” and “PowerManager” settings Page 3: “Others” menu settings · The current ScreenManager setting is displayed even if the input selection has been manually overridden by the use of the inp
Streszczenie treści zawartej na stronie nr. 17
How to use the ScreenManager E Entering the ScreenManager Push the Enter button once to display the main menu of the ScreenManager. Enter the Settings (1)To enter any sub menu icon, highlight the desired icon by using the Control buttons (up, down, right and left) and push the Enter button. The sub menu appears. (2)Use the Control buttons to select the desired setting icon and push the Enter button. (3)The setting menu appears. Use the Control buttons to make all required adjustments. Exit the
Streszczenie treści zawartej na stronie nr. 18
Shortcut keys Brightness and contrast can be adjusted directly without any need to enter the ScreenManager. Press the Control buttons to adjust the settings and then the Enter button to save all changes. See the diagram below for adjustment directions. The brightness and contrast functions are also available in the ScreenManager “Screen” menu. Brightness Contrast up Contrast up down Brightness down Adjustment Lock Auto Adjustment button Power Button The ScreenManager operation can be disabled b
Streszczenie treści zawartej na stronie nr. 19
2-2 Screen Adjustment E About Screen Adjustments Entering the ScreenMananger, select the “Screen” icon and push the Enter button to show the “Screen” menu. “Screen” adjustments for the LCD monitor should be used in suppressing screen flickering and also for adjusting the screen to its proper position. There is only one correct position for each display mode. It is also recommended to use the ScreenManager function when first installing the display or whenever changing the system. For convenienc
Streszczenie treści zawartej na stronie nr. 20
Adjustment Procedure Overview (1) Install and run the "Screen Adjustment Program" in the utility disk. (2) Push the Auto adjustment button. (3) Enter the ScreenManager and select the "Screen" menu. (4) "Clock" adjustment Horizontal bars appear. OK (5) "Phase" adjustment (6) "Position" adjustment (7) Confirm the "Resolution". (8) "Contrast/Brightness" adjustment (9) Exit the ScreenManager. A
